| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Di Mai 20, 2008 4:30 am Titel: What is this? |
|
 Verfasst am: Di Mai 20, 2008 4:30 am Titel: What is this? |
|
|
Katastrofo wrote:
I finished 3 rolls of film, and dropped it off at Wallies to later find that their
processor had broken down and had only 2 rolls developed. The roll from
the Canonet was fine, but this roll from the Contaflex IV was definitely
not. Is this a camera leaking light, or a processing issue?
Here's one from the Canonet, just winging on Sunny 16 settings:
There was some play in the back cover of the Canonet and I thought
I would see light leaks, but no. Both rolls that were processed are
Arista 100 film, the cheap stuff from Freestyle. The colors in the Canonet
shot are spot-on, late afternoon/almost dusk lit up the golden green of
the wheat field across the street from my home.
I'll take those three pics down after I hear a diagnosis, thanks. All I did
with the three is resize for web.
Bill
Zuletzt bearbeitet von Katastrofo am Di Mai 20, 2008 7:55 am, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
themoleman342
 Anmeldungsdatum: 21.10.2007 Beiträge: 2190 Wohnort: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Verfasst am: Di Mai 20, 2008 5:02 am Titel: |
|
 Verfasst am: Di Mai 20, 2008 5:02 am Titel: |
|
|
themoleman342 wrote:
curtain hang-ups? |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Di Mai 20, 2008 5:29 am Titel: |
|
 Verfasst am: Di Mai 20, 2008 5:29 am Titel: |
|
|
Katastrofo wrote:
| themoleman342 hat folgendes geschrieben:: |
| curtain hang-ups? |
Could be, if the leaf curtains are sluggish? Hummmm. |
|
| Nach oben |
|
 |
F16SUNSHINE
 Anmeldungsdatum: 20.08.2007 Beiträge: 5486 Wohnort: Left Coast
Expire: 2011-11-18
|
 Verfasst am: Di Mai 20, 2008 6:04 am Titel: |
|
 Verfasst am: Di Mai 20, 2008 6:04 am Titel: |
|
|
F16SUNSHINE wrote:
Dark seals. Looks like in more than one spot. How is the frame spacing. It looks like there may have been some slack between the cartridge and sprocket as well. I am not an expert but, this looks like a dark seal prob that I have had a couple times. Your canonet is a winner though Aye? Congrats on both. I bet that the contaflex will be humming along in no time _________________ Moderator |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Di Mai 20, 2008 6:33 am Titel: |
|
 Verfasst am: Di Mai 20, 2008 6:33 am Titel: |
|
|
Katastrofo wrote:
Andy, you're saying this is a lightseal problem? The back cover dogs down
like a deep sea diver's helmet. Dammit. I did the shutter curtain check as
per this guy last year when I got the cam, no issues, unless something
totally malevolent happened while sitting in an old armoire for close to a
year:
http://www.geocities.com/Colosseum/1522/my_zeiss.html
I didn't check to put tension on the roll when I loaded the film, and think
you have a good point about the film not advancing properly as the film
strip looks like it's advancing in half-frames and no frame spacing for a
good stretch of it. Shee-yott.
The Canonet rocks! I was taking bullshit pics around my home thinking
that it was the one that was leaking light as there was at least one mm
of play in the back cover. I think I'm going to like this cam a lot!
Bill |
|
| Nach oben |
|
 |
F16SUNSHINE
 Anmeldungsdatum: 20.08.2007 Beiträge: 5486 Wohnort: Left Coast
Expire: 2011-11-18
|
 Verfasst am: Di Mai 20, 2008 6:43 am Titel: |
|
 Verfasst am: Di Mai 20, 2008 6:43 am Titel: |
|
|
F16SUNSHINE wrote:
You Know Bill. You might just have a crap cartridge of film on your hands. Did you hand roll it or buy old stock? If you think the door is super snug than it probably is somthing else. Film is the next place I would look. If it was a shutter issue it would look different I think so likely safe there. _________________ Moderator |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Di Mai 20, 2008 6:50 am Titel: |
|
 Verfasst am: Di Mai 20, 2008 6:50 am Titel: |
|
|
Katastrofo wrote:
This is that cheap Arista film that Freestyle sells. It's the same film that I
used in the Canonet which had no issues. Now I didn't check for exp dates
on the canister, my bad, but it could be like you say, just a bad roll of
film. Hummm, again.
Bill |
|
| Nach oben |
|
 |
peterqd
 Anmeldungsdatum: 28.02.2007 Beiträge: 7449 Wohnort: near High Wycombe, UK
Expire: 2014-01-04
|
 Verfasst am: Di Mai 20, 2008 12:00 pm Titel: |
|
 Verfasst am: Di Mai 20, 2008 12:00 pm Titel: |
|
|
peterqd wrote:
Did you say you took 3 rolls in but only 2 were returned developed because the machine broke down? So one roll was ruined completely and these pics come from one of the other two rolls? That makes it 2/1-on that the lab damaged two rolls, not just one. _________________ Peter - Moderator |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Di Mai 20, 2008 8:24 pm Titel: |
|
 Verfasst am: Di Mai 20, 2008 8:24 pm Titel: |
|
|
luisalegria wrote:
Doesn't seem likely its a shutter problem with a Contaflex (I have a Contaflex Beta), as that has a between-lens leaf shutter, and if this is a shutter problem (hangup) it would be due to a focal-plane shutter. The Contaflex IV may be different though.
The Contaflex didn't have seals as such either. The thing locks up tighter than Fort Knox. I can't imagine a light leak in that.
I vote for a processing machine problem.
This is really annoying, to lose whole rolls. I just lost a roll in an Argus C44 because, stupid me, I wound through the end of the roll.
Nice Canonet. I have a 17 with a stuck shutter I'd like to get working. One of these days I'll try the flooding idea. |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Di Mai 20, 2008 11:42 pm Titel: |
|
 Verfasst am: Di Mai 20, 2008 11:42 pm Titel: |
|
|
Katastrofo wrote:
Peter, Luis, thanks for your comments.
Peter, they gave back the undeveloped roll so I'm thinking of having some
one else do the developing.
Setting the Contaflex on f22, B setting and pressing the shutter release it
sometimes closes all the way (if I press and release very quickly) or hangs up at f16-f22 somewhere when I do a slow release. I've been reading today about working on shutters with these cams and it is a total PITA, even for experienced repairmen. So I don't know what to think. The camera is in mint condition, beautiful shape otherwise, maybe it's always had this problem is why it's in such great cosmetic condition. But I'm a little more than reluctant to do any invasive therapy on this, for sure. I can leave the cam in my car on a sunny day and work the shutter after, to see if things will loosen up to where it closes like it's supposed to.
Luis, your Beta model and the BC model are sought after models, but
also a nightmare to work on. When I looked at the inside of the cam
today, I couldn't really see how you could install foam seals and be able
to dog down to close the camera, don't think it's a lightseal problem,
either.
Thanks again,
Bill |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Mi Mai 21, 2008 3:18 am Titel: |
|
 Verfasst am: Mi Mai 21, 2008 3:18 am Titel: |
|
|
Katastrofo wrote:
Luis, I hope you get your Canonet running again! Here's another scan from
that Arista 100 roll, taken at a better time of day for ISO 100:
Still can't believe this cam isn't leaking light with all the play in the film
door.
Using Sunny 16 and scanned at 2400dpi, Epson 4490.
Bill |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mi Mai 21, 2008 5:44 am Titel: |
|
 Verfasst am: Mi Mai 21, 2008 5:44 am Titel: |
|
|
luisalegria wrote:
Nice results with that Canonet !
Very sharp. The lens has a good reputation.
I don't remember mine being all that amazing way back when, but who knows, these judgements are so dependent on a roll or two. |
|
| Nach oben |
|
 |
peterqd
 Anmeldungsdatum: 28.02.2007 Beiträge: 7449 Wohnort: near High Wycombe, UK
Expire: 2014-01-04
|
 Verfasst am: Mi Mai 21, 2008 6:56 am Titel: |
|
 Verfasst am: Mi Mai 21, 2008 6:56 am Titel: |
|
|
peterqd wrote:
| Katastrofo hat folgendes geschrieben:: |
Peter, Luis, thanks for your comments.
Peter, they gave back the undeveloped roll so I'm thinking of having some
one else do the developing.
Setting the Contaflex on f22, B setting and pressing the shutter release it
sometimes closes all the way (if I press and release very quickly) or hangs up at f16-f22 somewhere when I do a slow release. I've been reading today about working on shutters with these cams and it is a total PITA, even for experienced repairmen. So I don't know what to think. The camera is in mint condition, beautiful shape otherwise, maybe it's always had this problem is why it's in such great cosmetic condition. But I'm a little more than reluctant to do any invasive therapy on this, for sure. I can leave the cam in my car on a sunny day and work the shutter after, to see if things will loosen up to where it closes like it's supposed to. |
OK, but I still think this damage results from a processing problem. If the shutter is sticking open you would get areas of the image which are completely burnt out. Here you can see there was once a perfect exposure which has been damaged later, like a double exposure, so it looks to me as though the shutter must have closed properly when the shot was taken.
The pattern of the damage is interesting too, in repeating vertical bands I'm wondering if this isn't due to extraneous light but maybe over-development. Did you see my picture of the rooftop carpark with the lighter bands resulting from developing problems? _________________ Peter - Moderator
Zuletzt bearbeitet von peterqd am Mi Mai 21, 2008 7:14 am, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Mi Mai 21, 2008 7:07 am Titel: |
|
 Verfasst am: Mi Mai 21, 2008 7:07 am Titel: |
|
|
Katastrofo wrote:
Peter, I remember your thread, will look for it again. Yes, in the back of
my mind is the fact that their processor broke down and couldn't do the
third roll and munched-up roll #2 to find out their processor is malfunctioning.
The camera was getting pretty warm in the car before I got to the mountains
anyway, so I'm thinking most times the shutter was OK, maybe wrong here,
but the only way to find out is shoot another roll and not have this particular
Walmart do the developing. And you're right, the exposures look good
except for these bands of superimposed hash in the frames. I'm pretty
sick about how this roll turned out, I had hoped to see some great pics of
flowers, but nope, maybe next time.
Bill |
|
| Nach oben |
|
 |
kansalliskala
 Anmeldungsdatum: 19.07.2007 Beiträge: 5122 Wohnort: Southern Finland countryside
Expire: 2016-12-30
|
 Verfasst am: Mi Mai 21, 2008 7:39 am Titel: |
|
 Verfasst am: Mi Mai 21, 2008 7:39 am Titel: |
|
|
kansalliskala wrote:
Watch out for the black dog that appears on every picture:
http://www.stephenking.com/pages/works/Four_Past_Midnight/ _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Mi Mai 21, 2008 11:50 am Titel: |
|
 Verfasst am: Mi Mai 21, 2008 11:50 am Titel: |
|
|
Katastrofo wrote:
Probably something that won't make Finland's front page news, but the
church mothers in my country have finally gotten their way, and Stephen
King is being banished to Finland! Isn't that wonderful? You'll be able to
discuss the works of this writer with the man himself very soon!
Have a nice day...
Bill |
|
| Nach oben |
|
 |
zewrak
 Anmeldungsdatum: 12.04.2008 Beiträge: 1212
|
 Verfasst am: Mi Mai 21, 2008 1:22 pm Titel: |
|
 Verfasst am: Mi Mai 21, 2008 1:22 pm Titel: |
|
|
zewrak wrote:
Is it just me that love the effect? Except for the sharp lines that is? Kind of reminds me of old glassplate pictures that have faded.
I think they are lovely. Just crop out the straight lines.  _________________ My homepage, all manual shots |
|
| Nach oben |
|
 |
Katastrofo
 Anmeldungsdatum: 26.02.2007 Beiträge: 10405 Wohnort: USA
Expire: 2013-11-19
|
 Verfasst am: Mi Mai 21, 2008 2:30 pm Titel: |
|
 Verfasst am: Mi Mai 21, 2008 2:30 pm Titel: |
|
|
Katastrofo wrote:
| zewrak hat folgendes geschrieben:: |
I think they are lovely. Just crop out the straight lines.  |
Thanks, zewrak, I'll get right on it...  |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|