MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

How do I have tilt capability?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I'm looking for the least expensive way to have lenses that tilt. Don't care about shift. What about a 4/3 mirrorless body and Lensbaby tilt transformer so I could use with my Nikon lenses? Would that be a good way to do it? I know Nikon makes perspective control lenses, but they're about 2 grand each. And then you're stuck with 1 focal length if you just have one. And can the aperture be adjusted with a G lens with the transformer?


Reply

Take appropriate ordinary lens and camera. Use two tripods, setting lens and camera on each. Bring together, with as little distance between each as possible. Adjust until the correct shift and tilt achieved! Cover the distance with copious, light impermeable, material, black latex? Take pictures and enjoy results.

What camera and lens are you intending to use?


Reply

If you're up for a DIY approach, I'm sure you could build a short bag bellows with two mounts for a fraction of the cost of the lensbaby.


Reply

Thanks for the suggestions for the DIY ideas. But I want something that's easy to use and locks in place once I get the tilt I desire. I would like to use my Nikon lenses, but if I found something cheap that would let me use other lenses on my Nikon, that would be good.


Reply

If you want to use your Nikon lenses on a 4/3 mirrorless body, then the Lensbaby is probably the most expensive way. There are generic no-name tilt adapters on eBay that are a third of the price.

If you want to use "other" lenses on your Nikon body, a tilt adapter for Pentacon 6 lenses is commonly available. I'm pretty sure there is a review of one of these with samples here on MFLenses... posted a year or so ago?

If you want to use Nikon lenses on your Nikon body, Hartblei, Arsat, and others make inexpensive tilt adapters with fixed tilt angles. Several different angles are available. Since these act as extension tubes, they are often marketed as macro tilt adapters.


... Or if you want to DIY on the cheap, you can build a bag bellows with a hinge and big easy wing nuts to lock it down. Very Happy


Reply

I want to focus to infinity-don't want a "macro" tilt adapter. I found this on Ebay.

http://www.ebay.com/itm/130537616680?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

Does anyone know if it will focus to inf on Nikon body? I asked seller 3 questions and that's the only one he did not answer.


Reply

Sorry, I don't see how it could. The device itself and an adapter P6 to Nikon means well over 5mm more like 20mm!

Might work on an EOS body? Or m4/3, of course.

Can you not just try, holding your lens in front of the camera? Just to see the result? Or are you going to take so many that hundreds of $$ is good outlay in a depression?


Reply

Hi Pat. I did more research on the adapter and lens, and it seems that it will focus to infinity. So I bought it on Ebay. When it gets here, I'll find out, and post some tilt pics here.


Reply

Hi Bill!

Klicke hier, um es auf Ebay zu sehen

A lot cheaper? JinFinance has a long cooperative history with amateur users so Always look at his site?

How ya getting on?