MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Carl Zeiss Biotar 75/1.5 T - Exakta to Nikon AI
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply







Exakta mount








with Topcon RE Super




to Nikon AI mount






with Nikon FM2




Reply

Mmmmmmmmmm Shocked


Reply

Interesting.

This looks like the machinist cut the back (with the lens mount) off the Biotar rear tube, as it is one piece, and put on a machined sleeve over the remaining tube held on by screws.

Shortening the tube this way gives an easy adjustment for the deeper Nikon mount.

A very neat and professional job, if rather drastic. I don't know if this reduces the collectible value of the Biotar. Odds are, at the moment, probably not, but at some time in the future it may be a different story.

I was thinking of a similar but much less destructive adaptation to PK, with a machined T-adapter fitting over the back of the rear tube and preserving the Exakta-mount, and held on by set-screws. There is enough extra depth in the helical mechanism to adjust for both the difference in mount depth plus the thickness at the bottom of the T-adapter, the only functional compromise being that the focusing scale is off.

The only loss here would be damage to the barrel from the set-screws, or possibly the need to drill some dimples for the set-screws (a neater solution). A good machinist could do a very neat job of this also.

Fortunately, it is in fact possible to make a completely non-destructive Biotar adapter for PK, and I believe this may be possible for Nikon also, if one accepts that the focusing scale will be off.