MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Please, advice: Pentax-K adapter for EOS
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi colleagues,

I'm about to order a Pentax-K adapter for the EOS 350D. But I'm unsure about which one to choose. I definitely want one with focus confirmation chip on.
But when buying adapters, there are aways risks, so I'd like to know your experience and your recommendations.
Is there any Infinity focus problem risk?.
My experience with the Exakta to EOS adapter was very negative. I paid around 70€ for an adapter without focus confirmation, and was warrant to focus to infinity.
What I received was an alu adapter that allows only for Infinity on the Pancolar, but not in all the other Exakta lenses...
So I'd appreciate very much if any of you that have already run the way could give a pointer to a reliable and tested Pentax-K to EOS adapter.

Thanks in advance!
Jes.


Reply

Hi Jes, I hope this helps a little. I bought a cheap, plain K-EOS adapter from Roxsen. I think it's plated brass (quite heavy), the fit is quite tight so the lens feels nice and secure, and I've had no problems with infinity focus. The only small complaints are that the index mark on the lens ends up about 45° clockwise from vertical, and I had to adjust the position of the spring catch so that it locates properly and prevents the lens becoming unmounted.

The relative sizes of the two bayonet mounts do not allow much metal thickness for the adapter, so this might be why the index mark is off-vertical, but I can't see any obvious reason. Also there isn't enough surface to directly glue an AF chip - it would need a bracket or a flange like the M42 adapters.


Reply

peterqd hat folgendes geschrieben::
Hi Jes, I hope this helps a little. I bought a cheap, plain K-EOS adapter from Roxsen. I think it's plated brass (quite heavy), the fit is quite tight so the lens feels nice and secure, and I've had no problems with infinity focus. The only small complaints are that the index mark on the lens ends up about 45° clockwise from vertical, and I had to adjust the position of the spring catch so that it locates properly and prevents the lens becoming unmounted.

The relative sizes of the two bayonet mounts do not allow much metal thickness for the adapter, so this might be why the index mark is off-vertical, but I can't see any obvious reason. Also there isn't enough surface to directly glue an AF chip - it would need a bracket or a flange like the M42 adapters.


Hi Peter,
Thanks for your comments. I also noticed that most of the sellers advice on the rotation issue you mention. One of them gives an explanation:

"The lens is mounted offset by about 30 degrees to keep the protruding guard of the aperture lever of the lens away from the reflex mirror of your camera. "

SInce the adapter is not too expensive (some 25€) I' think I'll give a try.

Jes.