| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Elaguapo
Anmeldungsdatum: 29.04.2026 Beiträge: 5
|
 Verfasst am: Sa Mai 02, 2026 12:47 pm Titel: Konica UC Hexanon 45-100mm Aperture return issue |
|
 Verfasst am: Sa Mai 02, 2026 12:47 pm Titel: Konica UC Hexanon 45-100mm Aperture return issue |
|
|
Elaguapo wrote:
Hi all,
Normally I just read posts but I'm stuck with this one!
I’m repairing a Konica UC Hexanon 45–100mm f/3.5 (Konica AR mount) and have an issue with the automatic aperture return mechanism.
The aperture blades respond correctly when the rear aperture actuating lever is moved by hand.
However, the lever does not return under spring tension.
After moving the lever to open the aperture, it stays stuck wide open.
I have to manually push the rear lever back with my finger to make the aperture stop back down to the selected setting (for example f/16).
There is zero snap-back or spring return.
Aperture blades themselves are free and do move.
Internal diaphragm is not seized.
The problem appears to be in the rear mount auto-diaphragm linkage, not the iris blades.
What I found after removing the rear bayonet:
Under the Konica AR mount there is:
a brass aperture return lever,
internal diaphragm follower,
I think I may be missing spring or catch.
The brass lever moves freely but has no preload/tension.
Does anyone have:
a repair manual,
a rear mount teardown photo,
or a clear picture showing where the aperture return spring attaches on this specific lens?
I’m specifically trying to determine:
whether the spring hooks from the brass return lever to a chassis anchor hole,
and what the correct spring orientation/path should be.
Any photos of the rear linkage under the bayonet mount would be hugely appreciated.[url=http://forum.mflenses.com/userpix/20265/big_12889_20260429_103745_1.jpg][img]http://forum.mflenses.com/userpix/20265/12889_20260429_103745_1.jpg[/img][/url]
[url=http://forum.mflenses.com/userpix/20265/big_12889_image1777455359695_1.jpg][img]http://forum.mflenses.com/userpix/20265/12889_image1777455359695_1.jpg[/img][/url] |
|
| Nach oben |
|
 |
visualopsins
 Anmeldungsdatum: 05.03.2009 Beiträge: 11698 Wohnort: California
Expire: 2027-07-11
|
 Verfasst am: Sa Mai 02, 2026 5:03 pm Titel: |
|
 Verfasst am: Sa Mai 02, 2026 5:03 pm Titel: |
|
|
visualopsins wrote:
Welcome Elaguapo! (Handsome one, eh? )
Somebody will be along short;y with help. You can upload pictures now if you like. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Nach oben |
|
 |
stevemark
 Anmeldungsdatum: 29.04.2011 Beiträge: 5509 Wohnort: Switzerland
|
 Verfasst am: Sa Mai 02, 2026 8:11 pm Titel: |
|
 Verfasst am: Sa Mai 02, 2026 8:11 pm Titel: |
|
|
stevemark wrote:
I don't have much experience servicing Hexanons, but cincidentally today I cleaned (fogging / fungus) and re-lubed an AR 1.4/57mm, an AR 4/200mm and a Tokina RMC 3.5/35-105mm with Konica AR mount. So now I'm at least familiar with the basic construction of the lenses.
I have one of those (pretty rare) UC 3.5/45-100mm lenses, and if you post a few images of what exactly you are looking for, I may be able to help.
S _________________ www.artaphot.ch |
|
| Nach oben |
|
 |
Elaguapo
Anmeldungsdatum: 29.04.2026 Beiträge: 5
|
 Verfasst am: So Mai 03, 2026 10:28 am Titel: |
|
 Verfasst am: So Mai 03, 2026 10:28 am Titel: |
|
|
Elaguapo wrote:
 |
|
| Nach oben |
|
 |
Elaguapo
Anmeldungsdatum: 29.04.2026 Beiträge: 5
|
 Verfasst am: So Mai 03, 2026 10:32 am Titel: |
|
 Verfasst am: So Mai 03, 2026 10:32 am Titel: |
|
|
Elaguapo wrote:
Thank you. I may be wrong but it looks like the brass lever should be attached to the white part on the image possibly by a spring or similar. It would be great to see what a working lens looks like to compare. |
|
| Nach oben |
|
 |
stevemark
 Anmeldungsdatum: 29.04.2011 Beiträge: 5509 Wohnort: Switzerland
|
 Verfasst am: So Mai 03, 2026 12:10 pm Titel: |
|
 Verfasst am: So Mai 03, 2026 12:10 pm Titel: |
|
|
stevemark wrote:
| Elaguapo hat folgendes geschrieben:: |
| Thank you. I may be wrong but it looks like the brass lever should be attached to the white part on the image possibly by a spring or similar. It would be great to see what a working lens looks like to compare. |
Ah yes, that part looks exactly the same as e. g. in an AR 1.4/57mm which I had opened yesterday.
The center of the spring (the round part) spring is attached to the large brass screw, whereas its two ends should push the two other "knobs" (the steel screw and the the brass knob) apart from each other.
S _________________ www.artaphot.ch |
|
| Nach oben |
|
 |
Elaguapo
Anmeldungsdatum: 29.04.2026 Beiträge: 5
|
 Verfasst am: So Mai 03, 2026 12:26 pm Titel: |
|
 Verfasst am: So Mai 03, 2026 12:26 pm Titel: |
|
|
Elaguapo wrote:
[quote="stevemark"][quote="Elaguapo"]Thank you. I may be wrong but it looks like the brass lever should be attached to the white part on the image possibly by a spring or similar. It would be great to see what a working lens looks like to compare.[/quote]
Ah yes, that part looks [i]exactly [/i]the same as e. g. in an AR 1.4/57mm which I had opened yesterday.
The center of the spring (the round part) spring is attached to the large brass screw, whereas its two ends should push the two other "knobs" (the steel screw and the the brass knob) apart from each other.
S[/quote] thanks for the information. I may be able to source a damaged lens as a donor. I dont suppose you have any images. It would be great if one of their cheaper lenses used the same part. |
|
| Nach oben |
|
 |
stevemark
 Anmeldungsdatum: 29.04.2011 Beiträge: 5509 Wohnort: Switzerland
|
 Verfasst am: So Mai 03, 2026 1:59 pm Titel: |
|
 Verfasst am: So Mai 03, 2026 1:59 pm Titel: |
|
|
stevemark wrote:
| Elaguapo hat folgendes geschrieben:: |
| It would be great if one of their cheaper lenses used the same part. |
Take an AR 1.4/57mm or an AR 1.8/52mm. Both have exactly the same layout, as shown here for the AR 1.8/52mm:
Later lenses may work as well (e. g. AR 1.7/50mm and AR 1.8/50mm), but I haven't checked those.
S _________________ www.artaphot.ch
Zuletzt bearbeitet von stevemark am So Mai 03, 2026 7:03 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
Elaguapo
Anmeldungsdatum: 29.04.2026 Beiträge: 5
|
 Verfasst am: So Mai 03, 2026 4:42 pm Titel: |
|
 Verfasst am: So Mai 03, 2026 4:42 pm Titel: |
|
|
Elaguapo wrote:
Thank you so much really appreciated |
|
| Nach oben |
|
 |
stevemark
 Anmeldungsdatum: 29.04.2011 Beiträge: 5509 Wohnort: Switzerland
|
 Verfasst am: So Mai 03, 2026 7:02 pm Titel: Re: Konica UC Hexanon 45-100mm Aperture return issue |
|
 Verfasst am: So Mai 03, 2026 7:02 pm Titel: Re: Konica UC Hexanon 45-100mm Aperture return issue |
|
|
stevemark wrote:
| Elaguapo hat folgendes geschrieben:: |
The aperture blades respond correctly when the rear aperture actuating lever is moved by hand.
However, the lever does not return under spring tension.
After moving the lever to open the aperture, it stays stuck wide open.
I have to manually push the rear lever back with my finger to make the aperture stop back down to the selected setting (for example f/16).
There is zero snap-back or spring return.
|
While in your lens this small spring here is missing, it's NOT the root cause of your problem:
The spring actuating the aperture (i. e. closing the aperture after you opened it manually) is located deeper inside the system. On the AR 1.4/57mm it's a coil spring. It may be unhooked, or completely missing. You'll have to dig much deeper into your lens - which may or may not be more complicated than with the primes I serviced yesterday.
Sorry to disppoint you ...
S _________________ www.artaphot.ch |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|