MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Digital Pinhole Cameras
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

This is a thread to collect your experiments with digital cameras and pinhole photography. Let's provide our digital beasts with pinhole apertures and see what we can come up with!


Reply

I have tried something like that.
But my results were real cr&p so far.

I will stay tuned, though...

Carsten


Reply

LucisPictor hat folgendes geschrieben::
I have tried something like that.
But my results were real cr&p so far.
Carsten


Well, we're here not only to produce masterpieces Wink but also to compare and learn, so why don't you post some results and explain what you did?
You may have experience = 1 on that, but for instance, I have experience = 0, so there will always be something to learn for somebody!


Reply

Today I made a pinhole camera using my E-300, piece of cardboard and alu foil. I haven't experience with pinhole cameras, everything was totally provisional Smile

Results from first hole weren't good. I know, this picture is overexposure Smile Very low contrast and sharpness:



Second hole was also bad... Poor results:



Third hole was a bit better Smile Good contrast, but poor sharpness.





Reply

Are you shooting with a tripod?.
The third and fourth ones are very good...

Best regards,
Jes.


Reply

Yes, I used a tripod and self-timer.
In the photos you can see many dirt spots. When I take pictures with normal lens, this problem doesn't exist Smile

Digital pinhole camera is good for macro with DOF from 0 to infinity (but IMHO the angle of view should be wider). ISO 200, 4 sec:



Interesting results with long exposure, also in sunny afternoon. ISO 200, 10 sec:



I'm going to make better pinhole Smile


Reply

Hubert, really like that last picture, very unusual but nice effect.

Steve, like the shots of the French press set and hammock detail!

Bill


Reply

Well, congratulations. None of my awkward tentatives of doing pinhole with my digital reflex has ever come out so sharp.

_


Reply

New to forum. I did some recently with a DIY conversion (body cap, coffe can metal, needle, hammer, tape, & hot glue...)
you can see them at www.flickr.com/photos/shadarington


Reply

Nice to see you here!


Reply

The New Lensbaby range now has the option of being able to fit different optics one of which is a f177 pinhole. The new Composer lens is the ideal one to go with it.


Reply

I tried pinhole photography some time ago, but was not really impressed:
http://photographyoftheinvisibleworld.blogspot.com/search?q=pinhole
BUT it has the advantage to show all the dirt on your sensor! Wink Wink

1/4sec, f240


Reply

Here are two more pinhole photos taken with a 0.25mm pinhole body cap (f/190) on 5D and post-processed.

In the first photo, the edge of the body cap touched the nearest edge of the plate:



In the second photo the distance from the sensor to the nearest lens is 10cm, and to the farthest lens about 35cm:



The final IQ is the result of multi-phase post-processing with GIMP:

1. add Gaussian blur to hide some diffraction noise, radius=4.0
2. down-sample to 3000 pixel wide
3. USM radius = 5.0, amount = 0.50
4. down-sample to 2200
5. USM radius = 3.8, amount = 0.40
6. down-sample to 1500
7. USM radius = 2.1, amount = 0.40
8. down-sample to 900
9. USM radius = 0.8, amount = 0.40
10. refocus = 0.8, noise = 0.02

I'm not sure whether this procedure is optimal, but the results are OK. This isn't your traditional pinhole photography, but the idea is to chart out the technical possibilities for those situations where lenses are simply inadequate and even layered focusing breaks down.

Veijo


Reply

Brilliant compositions, Veijo. I especially like the second one.
What is your feeling regarding digital and pinhole?
Do you think digital is better/same/worse than film as pinhole "medium"?

I somehow seem to prefer film to digital for this application (I am speaking purely on aesthetical level)


Reply

Orio hat folgendes geschrieben::
Brilliant compositions, Veijo. I especially like the second one.


thanks Smile

Zitat:
What is your feeling regarding digital and pinhole?
Do you think digital is better/same/worse than film as pinhole "medium"?


Well, digital (with a 5D) is very convenient for web use and perhaps for small prints up to 4" x 6" max. However, for larger prints I'd use film. With film, reciprocity failure may be a problem, especially with a large frame size and color. This is the technical side.

Zitat:
I somehow seem to prefer film to digital for this application (I am speaking purely on aesthetical level)


Using appropriately dimensioned pinholes, there isn't much difference aesthetically, that is, not more than when using lenses. 5" x 5" prints of my best 6x6 film pinhole photos are so sharp that you wouldn't think they are pinholes except for the DOF, 4"x6" prints from my 5D pinholes would already be quite soft. At the same original frame size, we would be back at the eternal film vs. digital debate, using a pinhole instead of lenses doesn't change much.

Veijo


Reply

My first pinhole experiments results are here:




Photos from Alpha A200


Reply

Back in the day, I used an oatmeal can (cylinder) as a camera, photo paper as the negative, and needle-pierced tinfoil for the pinhole, and got decent ultrawide infinite-focus results.

More recently I've put a PinholeEdun Body Cap (reputedly f/181, effectively 45mm) on my Pentax K20D, and all I get is utter crud. I suspect the hole is too large for an APS-C sensor, that it might be more appropriate of a full-frame camera. I've tried my own tinfoil piercings in other lens caps with similar (or worse) trash. And the dSLR structure doesn't allow for closer placement to the sensor plane for a shorter focal length.

I've tried pinholes on surgically-altered 240x320 webcams, but the resolution sucks. I'm tempted to dissect a 1mpx digicam and apply a pinhole but I fear results similar to the K20D efforts. My sister gave me a beautiful carved hardwood 6x9cm pinhole camera a couple Xmas's ago, but now I can't find it. Embarassed I am perplexed by failure. Where did I put that damn 6x9?????


Reply

Here are some pix I took with a pinhole lens made by Lenox Laser.
I glued a body cap on the side opposite the cap that the lens came with.
This way I can use it on both my Nikon D300 or Canon 550D.
Here are some samples:


_APR5066 by J Bruja, on Flickr


_MG_1026a by J Bruja, on Flickr


_MAY5111 by J Bruja, on Flickr


Reply

I used the well known Vivitar pinhole lens Wink




May have had some camera shake Very Happy



Pete


Reply

Your hole's too big Pete.


Reply

Not the first time I've been told that Smile


Reply

Here's a couple examples I've done with a body cap and small chunk of soda can;





I recently moved the chunk of soda can to a lens cap, and I intend to take some portraits of people who think the lenscap is still on.


Reply

What about diffraction with such small apertures?


Reply

Clearly tons of diffraction Wink


Pi n 604 by Nesster, on Flickr


Reply

Here are two test shots with a pinhole for L39 mounted on a Nikon 1 V1 using an L39-N1 adapter, FOV ~ 80 mm FF eq.
Even a 1" sensor can produce reasonable results with some PP, with some planning probably good enough for small still life prints.





Veijo