MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Removing front assembly of Mamiya/Sekor 2.8/135mm
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi everyone,

I am trying to get the lens restored to working order -- oil on aperture blades. I tried to have the front lens assembly removed but was unable to unscrew it as described elsewhere. I see no other way how it can be removed. If anyone can offer advice on how to proceed, please do. Rear elements were no big challenge, though some lacquer for thread locking was in the way at times.

Thanks in advance,
/DJ


Reply

Welcome dev_zzo

Can't remove name ring?. Have tool? Klicke hier, um es auf Ebay zu sehen If cannot remove with tool, may be glued. Others here have experience with that, using solvents iirc.


Reply

Mamiya had some good threadlocker and was not afraid to use it. You'll have to fight your way through it.


Reply

Gardener hat folgendes geschrieben::
Mamiya had some good threadlocker and was not afraid to use it. You'll have to fight your way through it.


Indeed. In the end, the problem was solved by removing the focusing barrel and dripping a lot of acetone on the junction to loosen the threadlocker up a bit. Then you can just turn it with bare hands.

All is well now, the patient has survived the operation. Smile Now I need a proper adapter as conventional M42-EOS doesn't fit properly...

Cheers,
/DJ


Reply

Congrats Like 1


Reply

Good to hear. Interestingly enough, I was cleaning up the other day and found a 135mm Sear/Sekor SX (it is the same lens) with a bad aperture. I had no problems whatsoever removing the front group.