| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
CameraCravings
Anmeldungsdatum: 12.05.2018 Beiträge: 4 Wohnort: New York, NY
|
|
| Nach oben |
|
 |
DigiChromeEd
 Anmeldungsdatum: 29.12.2009 Beiträge: 3468 Wohnort: Northern Ireland
|
|
| Nach oben |
|
 |
CameraCravings
Anmeldungsdatum: 12.05.2018 Beiträge: 4 Wohnort: New York, NY
|
 Verfasst am: Sa Mai 12, 2018 7:08 pm Titel: Re: Need Advice Fixing Diaphragm Pentax Super Takumar 50mm 1 |
|
 Verfasst am: Sa Mai 12, 2018 7:08 pm Titel: Re: Need Advice Fixing Diaphragm Pentax Super Takumar 50mm 1 |
|
|
CameraCravings wrote:
Thanks for this!!
So the diaphragm moving lever with a fork (seen in picture 4 and 5) is not tensioned unless the pin on the back of the lens is pushed in. If the pin is pushed in the lever is tensioned both ways. If the pin is released the lever is not tensioned at all in either direction. This is why the diaphragm does not return to open. I am wondering if a spring is missing somewhere. It does not look like the lens had been repaired or opened before.
However the normal operation of the camera includes: 1 the lens aperture is wide open; 2 shutter release button on the camera is depressed; 3 stop down lever intermittently pushes in the pin on the back of the lens and diaphragm closes; 4 the pin returns to its original position and diaphragm opens. Whith my lens this is not the case.
At this point I feel I should buy another ST 50 1.4 open it up and compare...
Thanks for any suggestions!! |
|
| Nach oben |
|
 |
Eddie46
 Anmeldungsdatum: 05.12.2016 Beiträge: 135 Wohnort: cardiff,UK
|
 Verfasst am: Sa Mai 12, 2018 7:45 pm Titel: |
|
 Verfasst am: Sa Mai 12, 2018 7:45 pm Titel: |
|
|
Eddie46 wrote:
I think I,m right in saying,you need the Aperture ring set to max closed (f16 f22 etc) to get maximum movement of the actuating arm.What makes you think it isnt the aperture itself thats sticking? |
|
| Nach oben |
|
 |
CameraCravings
Anmeldungsdatum: 12.05.2018 Beiträge: 4 Wohnort: New York, NY
|
 Verfasst am: Sa Mai 12, 2018 10:09 pm Titel: |
|
 Verfasst am: Sa Mai 12, 2018 10:09 pm Titel: |
|
|
CameraCravings wrote:
When I am holding lens pack in my hand and moving aperture lever aperture blades move freely without sticking.
| Eddie46 hat folgendes geschrieben:: |
| I think I,m right in saying,you need the Aperture ring set to max closed (f16 f22 etc) to get maximum movement of the actuating arm.What makes you think it isnt the aperture itself thats sticking? |
|
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|