| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Do Jun 12, 2008 12:57 pm Titel: Colour calibration |
|
 Verfasst am: Do Jun 12, 2008 12:57 pm Titel: Colour calibration |
|
|
Rob Leslie wrote:
We all sometimes have colour problems (Well I do)
Trying to match the colour you thought you saw when you did the shot can be a nightmare.
Also it may be your RAW camera colour settings are not right or have never been calibrated.
Here is the simple answer And Its Free.
Colour charts from you Local DIY
Use them on shoots and also use to calibrate the colour settings in your Raw converter (For each camera if you have more than one)
Have three or four of the same chart keep one in your bag and do a quick shot at the start of your shoot, then if need be simple match your colours on the monitor.
White point, Grey card or any auto colour setting may get you near the correct colour temp but a colour chart is the only way to make sure you are getting the shades of Blue, Green, Red you want.
This all relies on your Computer monitor also being calibrated, the first step to getting anything right.
You can see this is a Dulex mixer chart. If we all went and got the same charts wouldn’t life be easy? _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
patrickh
 Anmeldungsdatum: 23.08.2007 Beiträge: 8551 Wohnort: Oregon
Expire: 2011-11-18
|
 Verfasst am: Do Jun 12, 2008 5:26 pm Titel: |
|
 Verfasst am: Do Jun 12, 2008 5:26 pm Titel: |
|
|
patrickh wrote:
Rob
Check out QP color card. It is designed to be used with their software and is carefully controlled against master color standards. The problem with the paint cards is that they do in fact have fairly substantial color variation.
patrickh _________________ DSLR: Nikon D300 Nikon D200 Nex 5N
MF Zooms: Kiron 28-85/3.5, 28-105/3.2, 75-150/3.5, Nikkor 50-135/3.5 AIS // MF Primes: Nikkor 20/4 AI, 24/2 AI, 28/2 AI, 28/2.8 AIS, 28/3.5 AI, 35/1.4 AIS, 35/2 AIS, 35/2.8 PC, 45/2.8 P, 50/1.4 AIS, 50/1.8 AIS, 50/2 AI, 55/2.8 AIS micro, 55/3.5 AI micro, 85/2 AI, 100/2,8 E, 105/1,8 AIS, 105/2,5 AIS, 135/2 AIS, 135/2.8 AIS, 200/4 AI, 200/4 AIS micro, 300/4.5 AI, 300/4.5 AI ED, Arsat 50/1.4, Kiron 28/2, Vivitar 28/2.5, Panagor 135/2.8, Tamron 28/2.5, Tamron 90/2.5 macro, Vivitar 90/2.5 macro (Tokina) Voigtlander 90/3.5 Vivitar 105/2.5 macro (Kiron) Kaleinar 100/2.8 AI Tamron 135/2.5, Vivitar 135/2.8CF, 200/3.5, Tokina 400/5,6
M42: Vivitar 28/2.5, Tamron 28/2.5, Formula5 28/2.8, Mamiya 28/2.8, Pentacon 29/2.8, Flektogon 35/2.4, Flektogon 35/2.8, Takumar 35/3.5, Curtagon 35/4, Takumar 50/1.4, Volna-6 50/2.8 macro, Mamiya 50/1.4, CZJ Pancolar 50/1,8, Oreston 50/1.8, Takumar 50/2, Industar 50/3.5, Sears 55/1.4, Helios 58/2, Jupiter 85/2, Helios 85/1.5, Takumar 105/2.8, Steinheil macro 105/4.5, Tamron 135/2.5, Jupiter 135/4, CZ 135/4, Steinheil Culminar 135/4,5, Jupiter 135/3.5, Takumar 135/3.5, Tair 135/2.8, Pentacon 135/2.8, CZ 135/2.8, Taika 135/3.5, Takumar 150/4, Jupiter 200/4, Takumar 200/4
Exakta: Topcon 100/2.8(M42), 35/2.8, 58/1.8, 135/2.8, 135/2.8 (M42), Kyoei Acall 135/3.5
C/Y: Yashica 28/2.8, 50/1.7, 135/2.8, Zeiss Planar 50/1.4, Distagon 25/2.8
Hexanon: 28/3.5, 35/2.8, 40/1.8, 50/1.7, 52/1.8, 135/3.2, 135/3.5, 35-70/3.5, 200/3.5
P6 : Mir 38 65/3.5, Biometar 80/2.8, Kaleinar 150/2.8, Sonnar 180/2.8
Minolta SR: 28/2.8, 28/3.5, 35/2.8, 45/2, 50/2, 58/1.4, 50/1.7, 135/2.8, 200/3.5
RF: Industar 53/2.8, Jupiter 8 50/2
Enlarg: Rodagon 50/5,6, 80/5,6, 105/5.6, Vario 44-52/4, 150/5.6 180/5.6 El Nikkor 50/2,8,63/2.8,75/4, 80/5,6, 105/5.6, 135/5.6 Schneider 60/5.6, 80/5.6, 80/4S,100/5.6S,105/5.6,135/5.6, 135/5.6S, 150/5.6S, Leica 95/4 |
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Do Jun 12, 2008 6:12 pm Titel: |
|
 Verfasst am: Do Jun 12, 2008 6:12 pm Titel: |
|
|
Rob Leslie wrote:
Hi patrickh
This isn't a colour chart to Calibrate your equipment to a specific standard
of colour. It is just as a shooting colour reference card.
A bit like bringing the red door home with you so you get the colour right!
And it costs nothing for as many colour charts as you want
PS Most new users of RAW I meet have no idea about calibrating the camera default colour settings so putting them on to a free way of having a go could be better than telling them they need a 'Special' chart. _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Do Jun 12, 2008 7:00 pm Titel: |
|
 Verfasst am: Do Jun 12, 2008 7:00 pm Titel: |
|
|
Orio wrote:
| Rob Leslie hat folgendes geschrieben:: |
This isn't a colour chart to Calibrate your equipment to a specific standard
of colour. It is just as a shooting colour reference card. |
In theory it makes sense, in practice it will not really work because there is a huge difference between the colours as can be printed with inks on paper and the RGB colours that your monitor is able to display. In other words, you will never be able to obtain the same card colours on your monitor, because the mediums (inks on paper, and LCD) are not compatible. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Fr Jun 13, 2008 12:35 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 12:35 am Titel: |
|
|
Rob Leslie wrote:
I’m surprised this simple way of working is being complicated.
Orio with all respect are you saying I can’t reproduce a colour I photograph?
Before you answer that please consider that the simple colour chart is being used on location as a guide to colours as your camera saw them or/and you will convert them from the RAW file.
In other words I can’t bring the Red door home with me But I do have my colour chart that I photographed as a ‘Guide’ when I took the shot.
I recently photographed a Gipsy caravan and I know the lady who owns it wants prints that reproduce the same colours. To make sure I have those colours right I photograph my simple Free colour chart and use it as a reference. If my print colour isn’t right then I got it wrong and I do the print again.
I don’t go back to her and tell her the printer can’t print that colour or my camera can’t record that colour! if I did she would rightly consider me to be a very poor photographer.
Yes there are more elaborate and more exact ways of reproducing true colour tones (As you saw them) but this is a very simple way that costs nothing, requires no new software and is fairly fool proof.
Final question. How come my monitor and printer can reproduce the colour chart as I see it? Or put another way my camera and my prints always reproduce the colours as I saw them or as they are unless I wish to change them.
I should also add that I wasn't going to give this little secret away but thought what the hell I'll share it. Perhaps it is a secret because people miss the simple answer to some problems.
P.S I am looking at my colour chart which is on my desk in front of my monitor. The colours reproduced in Photoshop are the same, the colours reproduced on the image on this post are also the same. I have not printed this but I can guarantee the print would also be the same. If it wasn't I would do the print again. _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Fr Jun 13, 2008 5:55 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 5:55 am Titel: |
|
|
Orio wrote:
| Rob Leslie hat folgendes geschrieben:: |
I’m surprised this simple way of working is being complicated.
Orio with all respect are you saying I can’t reproduce a colour I photograph?
Before you answer that please consider that the simple colour chart is being used on location as a guide to colours as your camera saw them or/and you will convert them from the RAW file. |
I am saying that a RGB monitor can not reproduce precisely the colours of printed ink, because of the different ways the colours are produced. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
hacksawbob
 Anmeldungsdatum: 28.02.2007 Beiträge: 1293 Wohnort: LANCS UK
|
 Verfasst am: Fr Jun 13, 2008 6:18 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 6:18 am Titel: |
|
|
hacksawbob wrote:
Firstly congratulations on an excellent hack, fantastic idea. And it will probably work well enough, it is certainly better than not checking colours and doesn't involve handing over large sums of money to a company for a bit of card bravo.
There are some limitations. The more I discover about light the less I find I know. It is one of the fundamental senses and we make lots of assumptions about it that we take for granted, when someone challenges that it takes a while to get your head around it. I have met a colour scientist and it was a fascinating chat!
If your goal is to have precise colour rendition on your print then yes compare the reference card with the print.
However one slight bug I can see is that it relies on the light reflecting off the card sat in front of your monitor being the same as the light that reflected off the subject in the photograph.
Your printer cannot reproduce all the colours we see, that the camera can capture, or your monitor display. It can only make an approximation as it range of colour is limited by the inks it uses. _________________ LENS LIST |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Fr Jun 13, 2008 7:13 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 7:13 am Titel: |
|
|
Orio wrote:
| hacksawbob hat folgendes geschrieben:: |
Your printer cannot reproduce all the colours we see, that the camera can capture, or your monitor display. It can only make an approximation as it range of colour is limited by the inks it uses. |
The monitor creates colours in additive way
http://en.wikipedia.org/wiki/Additive_color
this has several consequence, the first is that the monitor portrayed "objects" actually emit light, while real world objects reflect light.
Prints work in a more similar way as nature, that is, they create colours by subtracting light.
source, therefore we define the colours in the prints as subtractive:
http://en.wikipedia.org/wiki/Subtractive_colour
There is however still a difference between printed colours and nature colours, and it is that each object in nature has an own way to create it's own colours. For instance, a stone has a different way to create a grey or ochre colour, than a bark has. This difference has to do with the chemical composition of the objects, and with their physical properties as well, such as reflectivity or translucency.
The extreme subtleties of these differences make the world a virtually infinite source of colours. Prints have to translate this into inks - but inks have very limited properties - those of ink - and they can only mimick the properties of the real world objects.
For that purpose, inks use black - black ink is used to create different shades from the mix of the primary colours.
So the prints are based on four colours - the three primary plus black.
Monitors are also a translation of the colours from the real world - the problem is that they translate in a different language than the prints.
Firstly, the primary colours are different. Secondly, there is no such thing as black light to mix with the primaries. Black, in monitor, can only be absence of light. Therefore black can not be mixed in when using monitors. Monitors can translate the subtle shades by reducing the amount of light they use, not the quality.
As a result, let's say we have a rock to reproduce. A print will reproduce it by mixing in black ink to create the grayish shades. This quality of grey will be independent from illumination: it will exist both under sunlight and in the shadow. A monitor will reproduce the greyish shades by reducing the amount of light in the addition of the primaries. The "black" that monitor creates is really a "darkness" not a "black-icity".
So the point is that both print and monitor are translation of reality into different and non compatible languages.
To reproduce the colours of reality by comparing a print and a monitor would be like trying to reproduce a French novel by comparing it's English and German translations. You can approximate, perhaps, but you can never reproduce the reality of what was there. You can only make a translation more similar to another translation.
Finally, let's not forget the impact of human perception. The fact that monitor is a light emitting source, while cardboard is not, makes a big impact in the way we perceive the colours. First, it raises the problem of if the ambient light we are looking at the cardboard in, is really useable as a standard - do we really use our computer in a perfectly neutral, 5500 Kelvin degrees environment? I doubt that. So the presumed "objectivity" of the cardboard we see is all but sure. Secondly, we perceive colours in a different way if the object we are looking at emits light. Try to take a coloured glass and look at it in a room lit by a lamplight, with a black or grey cardboard behind, then place it in front of the lamplight: the light source is identical, but the perception we have is completely different, to a point that is not even possible to compare the two.
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Fr Jun 13, 2008 7:39 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 7:39 am Titel: |
|
|
Rob Leslie wrote:
Bob has it right.
I think the first point is few even bother to check colours at all and few even care about reproducing the correct colour.
For many subjects this is OK but if you doing fashion shots, product shots etc it is best to get the colour tones right.
Without doubt the printer will produce better and more subtle colour than the monitor, but we live with this and are used to it as long as the printed image matches the monitor picture as near as dam it.
We know the camera sensor, the monitor and the printer all work in different ways. We don't just throw up our hands and give up. We make corrections for it. That is what the simple paint colour chart helps to do.
Pointing out all the reasons why it wont work is very easy if you have a simple alternative to reproducing colours better.
It is the best way I have found.
A white or grey card will give good Colour balance but it wont give you the near exact shade of blue or green or WHY you photographed and need to reproduce.
Of course as I pointed out in my original post, the whole thing starts with correcet monitor calibration and also working with your colour profiles. Photo shop does a good job of converting profiles and instructing the printer to get it right.
Again all I can say is both my Inkjets (Epson A3 Photo Ex and A4 Photo 890) will reproduce colours as I see them on my monitor (Near exact) My outside Pro printer (Larger prints) also has no problems with my files as does my cheapo Fuji machine prints I have done by the hundreds. All my print options can even print BW (From the colour inks) with no problem or casts.
How do you check individual colour tones are correct? _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Fr Jun 13, 2008 8:19 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 8:19 am Titel: |
|
|
Orio wrote:
There is no such thing as "correct colour tones" in a reproduction.
The monitor can not reproduce the colours of a printed board. It can only offer it's version of them. Like it does with every other object.
Also are you comparing your monitor with your cardboard in a neutral environment? You have not replied to that. If you do by the daylight you will get one result, if you do by tungsten light another. And your printer as well is subject to this relativity. You may have a good matching setup between your printer and monitor but if you are comparing with the cardboard in a non neutral environment your result will not be similar to "what was there in reality" (provided that such a thing exists).
There is another problem that is added to the non-equivalence of the medium. It is the brain accomodation. Our brain tends to "white-balance" our perception according to the environment we are in. So what is, really, "the colour that was there"?
is it the colour that your brain perceived? This is highly subjective.
Or is the colour that was really there, the amount of deviation from the theoretical "neutral" value of 5500 Kelvin degrees?
A far more objective process would be to leave your camera at 5500 Kelvin and never adjust.
This way, everything that the camera records will be the exact deviation from the 5500 standard temperature.
Of course this will not match what your brain sees or remembers near dawn or dusk. And the reason is that your brain corrects what you see.
But is your brain measurable? No.
So i see the cardboard thing as something that is ambiguous from the start. Because we lack standards in the move from one reproduction process to the other.
I personally think that leaving the camera at 5500 Kelvin and never adjust is the closest thing possible to an "objectivity". Don' t need a cardboard when the camera itself will record the deviations from 5500 as differences in colour temperatures.
But even then, what your camera sees there, what your brain sees there, what your monitor is able to display, the type of ambient light you work with your monitor in, how your brain adjusts to it - these are all factors that make an impact to a point that in my opinion, objectivity is just a pretention. We have to live with the subjectivity of it all.
And nowhere until now we faced the topic, if your camera is really objective in recording the colours "that are there"... including your cardboard... _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
A G Photography
 Anmeldungsdatum: 11.05.2008 Beiträge: 1480 Wohnort: Bologna - Italy
|
 Verfasst am: Fr Jun 13, 2008 8:39 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 8:39 am Titel: |
|
|
A G Photography wrote:
You need a color checker with RGB and CMYK values to work decently (not perfect, decently).
I learnt the hard way not to rely on my eyes perception, also because we all have very different perceptions of colours ourselves.
There are several scripts aorund that using a checker shot can calibrate ACR or Lightroom. Still they are a pain to use effectively, but if you want I can give you some links. _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Fr Jun 13, 2008 9:11 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 9:11 am Titel: |
|
|
Orio wrote:
The point really is: the important thing is to make:
a) the monitor produce a neutral white, and a full range of contrast
b) the printer reproduce a neutral grey as a neutral gray, and a full range of contrast
Note that I am not saying "to make the printer match the monitor" because this is not possible. The difference is evident even in the terms that I use: the monitor PRODUCES light, the print REPRODUCES it.
Once you have a) and b) set, the rest is the realm of subjectivity.
You can consider colour temperature in two ways:
1) as a deviation from an arbitrary "standard" value.
2) as the matching of human perception
It comes obvious that 1 is the only measurable method.
To use method one, you need to set your camera to work at what you consider the standard. Commonly standard is considered 5500 Kelvin degrees. But it is important to remember that 5500K is not "the" standard as in "Truth", it is just "a" standard. Just like a meter does not mean anything by itself - a meter is a meter, it is arbitrary, just like the 5500K
Ok so you want to use method one, then set camera to always work at 5500K. When the camera does not reproduce a perfectly neutral grey, it means that the natural light was different from 5500K. That difference, is the "reality", that is, is the real colour as you measure it starting from the arbitrary standard of 5500K.
If instead, you want to reproduce the colour as you perceive it, you need to take into account your brain perception. Like I said, the brain adjusts the perception of colour balance. This is the reason why, when we look at photos taken with camera fixed at 5500K, we perceive a big difference at dawn and dusk. The fault is not the camera's: camera keeps recording as white=5500K. The fault is in our brain: it is our brain that adjusts the white as we perceive it during dawn or dusk.
So the conclusion is that method 2 means to COMPENSATE the difference between method 1 and the amount of correction that our brain applies.
It comes without saying, that there is no way to have a standard measurement for method 2. Even if you photograph the cardboard on location using the camera set at 5500K, what you will see at home is what your camera remembers, not what your brain saw. And when you adjust it using your real cardboard in front of you as a comparison, you are not adjusting to what your brain saw there, you are adjusting to what your brain is seeing now, in a computer study room, in completely different environment conditions.
In my opinion, if you want to follow method 2, it is much better to rely on your visual memory, because it will be more faithful to what your brain perceived on location, than comparing with a cardboard as seen in a room. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Fr Jun 13, 2008 9:33 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 9:33 am Titel: |
|
|
Rob Leslie wrote:
A extra bit about Colour and Colour printing.
This is an A2 ‘Proof’ to a leaflet printed on a Stylus Pro 3800
A proof is always made to check colours and layout.
The proof is was made on a inkjet printer yet the 16,000 copies were printed on laser? A problem with colour matching? Of course not.
This is a photo of the proof (Canon A80 snap) not the original file.
Consistency of output between printers is assured whether a proof or the finished product is printed on the same machine or a different one, every print is the same, as long as colour profiles are used.
The printer is operated by the computer program and prints in the colour profile it is instructed to. In another dept and another computer and operator, the same ‘Proofed file’ is sent to the Laser printer and again that prints in the colour profile it is instructed to.
Colour profiles match colours perfectly as long as the software is set up right and the operator doesn’t make a silly mistake.
Your camera also ‘Interprets’ colour (Sensors don’t record colour) as a colour profile. When using RAW you can convert the sensor information to any colour profile you wish and also adjust the tones of those colours.
The big question is how do you know what shades you have photographed and are trying to reproduce? Was the grass really Purple?
If a camera sensor only interprets colour (Which it does) even if one has a correct white balance how do we know we have the right shades of colour?
This business of reproducing true colour can be as simple or as complicated as you want, but to write that it can’t be done is to wipe out the whole publishing industry, whether it be High quality art reproduction or a few thousand leaflets and posters.
More info on that Leaflet
http://robleslie.blogspot.com/2007/11/new-stanton-park-leaflet-is-available.html _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
A G Photography
 Anmeldungsdatum: 11.05.2008 Beiträge: 1480 Wohnort: Bologna - Italy
|
 Verfasst am: Fr Jun 13, 2008 10:43 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 10:43 am Titel: |
|
|
A G Photography wrote:
Rob, it can be done as I wrote, not perfect, but in a decent way.
Still if you don't have the RGB and CMYK values of the color target you're using you don't stand a chance to get any measurement.
The scripts I talked about make a simple thing you can do also by yourself.
Get a photo color target with at least RGB and CMYK colors, shot it under diffuse 5500k light, open the target in Lightroom or ACR and set the calibration sliders to replicate those basic colors the more accurate possible to the printed target.
At least now you have calibrate your RAW software to the camera, a good basis from where you can then calibrate your printer to your monitor. _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Fr Jun 13, 2008 11:39 am Titel: |
|
 Verfasst am: Fr Jun 13, 2008 11:39 am Titel: |
|
|
Rob Leslie wrote:
| A G Photography hat folgendes geschrieben:: |
Rob, it can be done as I wrote, not perfect, but in a decent way.
Still if you don't have the RGB and CMYK values of the color target you're using you don't stand a chance to get any measurement.
The scripts I talked about make a simple thing you can do also by yourself.
Get a photo color target with at least RGB and CMYK colors, shot it under diffuse 5500k light, open the target in Lightroom or ACR and set the calibration sliders to replicate those basic colors the more accurate possible to the printed target.
At least now you have calibrate your RAW software to the camera, a good basis from where you can then calibrate your printer to your monitor. |
Two different subjects here. I am in no way recommending you calibrate your equipment with a paint colour chart.
All you monitor and printer calibration should already be done.
The paint chart is just a colour reference for the shots you have done on location.
Just to get that shade of red/yellow (By RAW conversion adjustment) your tomatoes were when you shot them and independently from a blanket change of colour balance! _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
A G Photography
 Anmeldungsdatum: 11.05.2008 Beiträge: 1480 Wohnort: Bologna - Italy
|
 Verfasst am: Fr Jun 13, 2008 1:03 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 1:03 pm Titel: |
|
|
A G Photography wrote:
Rob, you're not understanding what I'm saying
The above procedure is not to calibrate the monitor, it's to calibrate ACR or Lightroom with the raw files produced by your camera.
Of course it doesn't exist a perfect calibration but with patience it could be improved.
Take your example of the tomatoes, a lot of times I had problems with magenta casts shooting them.
If I calibrated the raw output of my camera, opening the file in Photoshop through ACR I have the red square of a RGB CMYK target with values pretty much close to pure red (255,0,0) not as 190, 60, 20.
You'll find out doing that calibration that you'll need to have a lot of compromises but I prefer to be the one who choose a less saturated red, not the camera because of some random cause (and yes, the same camera model can have difference outputs, it all comes down to the sensor tolerance).
Otherway if you want to have a really professional approach you should use an expensive colorimeter with a narrow angle of measurement and check out the principal colours of the scene you're shooting given the existing light, sign them down, and trying to replicate them in post production. _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Nach oben |
|
 |
maddog10
 Anmeldungsdatum: 08.04.2008 Beiträge: 1072 Wohnort: Maryland, USA
Expire: 2015-02-12
|
 Verfasst am: Fr Jun 13, 2008 1:13 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 1:13 pm Titel: |
|
|
maddog10 wrote:
Alessandro,
I think what you are saying, is that you are using it to develop a custom profile, in your PP software, for your camera. Correct?
Rob,
I see your point about using it as an 'in field' reference to confirm that the colors shown are not way out of balance. By default I think this does also include white balance. _________________ Michael Hill |
|
| Nach oben |
|
 |
A G Photography
 Anmeldungsdatum: 11.05.2008 Beiträge: 1480 Wohnort: Bologna - Italy
|
 Verfasst am: Fr Jun 13, 2008 1:26 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 1:26 pm Titel: |
|
|
A G Photography wrote:
| maddog10 hat folgendes geschrieben:: |
Alessandro,
I think what you are saying, is that you are using it to develop a custom profile, in your PP software, for your camera. Correct?
|
More or less, ACR and Lightroom have "inner" profiles, untouchable by the users and relative to every camera they support. But both have also a Camera Calibration section where you can move saturation and hue of the RGB colors:
http://www.rags-int-inc.com/PhotoTechStuff/AcrCalibration/ _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Nach oben |
|
 |
hacksawbob
 Anmeldungsdatum: 28.02.2007 Beiträge: 1293 Wohnort: LANCS UK
|
 Verfasst am: Fr Jun 13, 2008 1:59 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 1:59 pm Titel: |
|
|
hacksawbob wrote:
You can always take the print back to the scene and compare it with the caravan! (on a day with the same weather of course) _________________ LENS LIST |
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Fr Jun 13, 2008 3:02 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 3:02 pm Titel: |
|
|
Rob Leslie wrote:
| hacksawbob hat folgendes geschrieben:: |
You can always take the print back to the scene and compare it with the caravan! (on a day with the same weather of course) |
Bob I do think you are the only person who understands this simple idea.
I have no need to take my print back to the caravan because I have my colour chart that I photographed with the scene at the time.
It is smaller and easier to bring back home with me than the caravan!
The idea has nothing at all to do with Profiles or true colour balance, we all know how to handle them but I must admit I for one can’t remember the near/exact colour an object was so I include a reference (The colour chart) in a shot.
I really can’t see why it is causing so much debate unless my explanation is being misunderstood?
White balance doesn’t always give the individual colour shades you want, expect or saw at the time. It may be correct but it wasn’t what the eye perceived. Many variables change individual colour tones including a particular lens or make of the camera. This is clearly seen in many peoples test shots of lenses. With digital the problem can have the potential to display many shades of colour as completely different to what we perceive. This isn’t extraordinary as we are dealing with software that can only take a good guess at what colour it should be.
http://www.luminous-landscape.com/tutorials/whats-the-problem.shtml
The above link will probably complicate everything again. Please see my Paint colour chart as just one of the small links the author writes about.
But never mind it is a good discussion.
A quote from a small part of the article.
1. A film camera can output a transparency. The film manufacturer controls the color. A digital camera outputs a digital file full of numbers. Those numbers do not become color until you image them on a monitor or printer.
2. Inside the digital camera there is RAW output from the sensor. A processor in the camera then converts it from RAW to some standard color space and outputs a file. It only becomes color when that file is imaged on an accurately calibrated and profiled monitor or printer. Given this, it has always bothered me when a person reviews a new camera and comments on the color that the camera, alone, produces. Digital cameras do not output color. Cameras are only the first link in the chain.
3. The good news is you can adjust everything. You should think of a RAW file as a latent image on film. You can control the development, the gamma, the color gamut, and the tonal mapping. You can emulate almost any film or create a whole new look. You can get either pleasing color or fairly accurate color.
4. The bad news is you can adjust everything. To get what you want requires a considerable amount of new knowledge and skill.
5. A digital camera or scanner does not have a color gamut.
6. There is no such thing as “Push button color”. Color in the final analysis is a subjective experience in our brains and we all don’t see it alike. The best we can hope for from of a color management system is that it be consistent
My Paint colour chart is IMO a help when dealing with these points Particularly point 4 _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
A G Photography
 Anmeldungsdatum: 11.05.2008 Beiträge: 1480 Wohnort: Bologna - Italy
|
 Verfasst am: Fr Jun 13, 2008 3:32 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 3:32 pm Titel: |
|
|
A G Photography wrote:
| Rob Leslie hat folgendes geschrieben:: |
My Paint colour chart is IMO a help when dealing with these points Particularly point 4 |
From your link:
"The people who worked in these laboratories shared with me that, “It is more important that the media be consistent and produce pleasing color, rather than producing accurate color.”"
Your method won't work because you're not using a consistent instrument and media (just the fact that the chart is glossy is a reflected light nightmare) but as you insisted that you can get good results from it good for you.
I prefer to have a decent calibration once for all so to just worry about WB when shooting. _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Fr Jun 13, 2008 3:43 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 3:43 pm Titel: |
|
|
Orio wrote:
| Zitat: |
The idea has nothing at all to do with Profiles or true colour balance, we all know how to handle them but I must admit I for one can’t remember the near/exact colour an object was so I include a reference (The colour chart) in a shot.
I really can’t see why it is causing so much debate unless my explanation is being misunderstood? |
I'm sorry, but I completely miss the point of your method.
I explained why in many lines of my messages, but you never replied to any of my observations. Which I will not repeat again in detail. Please refer to my previous messages if you still hadn't.
I try to summarize by main chapters:
A) there is an insuperable difference between the media (additive vs. subtractive colours) that makes any colour matching impossible (you can not match a colour of a light emitting source with a colour of a light reflecting source)
B) photographing a colour card on location does not give you a document of absolute truth. The card is photographed by the same camera whose colour fidelity you don't trust. If the subject photo is colour faulted, so is the reference photo
C) adjusting a reference shot based on the card as you see it in you studio does not give you an absolute value reference. To see the reference card correctly, you should have an environmentally perfect studio (no window lights - no colours in the room to cast indirect light - perfectly tuned 5500K professional lamps) and this is usually not what happens to be
D) even if C is realized, what would be the final result? To adjust the location photo to match the reference card as seen in neutral condition, means to basically do the same thing as white balancing - you adjust a location colour map to adhere to a neutral standard map. I don't see the point of this, when there is white balancing available.
E) on top of this all, you can never have a "real colour certificate" because your brain continuously makes up for light changes and balances what you see. Like I repeatedly wrote in my previous message, there is just one way to record objectively the colours, and this is to set your camera to a fixed standard Kelvin value (normally 5500K°) and always keep it that way. All the deviations from neutral white that your camera records when set up that way, are the "real colour" of that scene. Like I said, this will sometimes match what your eyes see, and sometimes not, but the "fault" (if we can call it this way) it's not in the camera, it's in our brains. And our brains make it all work subjectively.
I hope it's clear what I mean - I ended up repeating much of the points again. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
Rob Leslie
 Anmeldungsdatum: 20.03.2007 Beiträge: 1103 Wohnort: UK Swindon
|
 Verfasst am: Fr Jun 13, 2008 5:06 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 5:06 pm Titel: |
|
|
Rob Leslie wrote:
Orio all of your points are valid.
However we do have to do our best to overcome limitations or make the best of features we are offered.
It is very clear what you mean and I understand all the correct theory behind it.
With my own work I felt a need for a colour reference point which was better than grey card colour balance. I can accept that many others have no such need or can’t see the point of it or even those who need a even better more accurate way.
As mentioned I have no problem with monitor/printer colour matching. I believe I can do this to a professional level. The only problem I have is colour variations due to a variety of causes when shooting. Such causes are exposure errors, reflected colour casts, different lenses, the camera sensors sensitivity to certain colour wavelengths etc, etc. Also such discrepancies can be introduced when doing a RAW conversion to achieve an overall ‘Best’ image. IMO a simple ‘Blanket’ white balance adjustment does not solve some of these discrepancies and can result in a colour which is not representative of the average perceived one. I.e. A nice dark red can be more like a dull brown.
As I cannot remember the shade or tone of every colour I photographed on a shoot I personally find a simple free colour paint chart photographed in the corner of the frame on a few test shots to be a handy reference.
It is quick, easy, free and certainly better than nothing
“All the deviations from neutral white that your camera records when set up that way, are the "real colour" of that scene. Like I said, this will sometimes match what your eyes see, and sometimes not, but the "fault" (if we can call it this way) it's not in the camera, it's in our brains. And our brains make it all work subjectively”
This is correct and in this satatement you are admitting there may be a problem to be solved?
I or many of my subjects don’t wish to accept what may be correct. I want the colour that my eyes and brain ‘Perceived’ and the only way I have found to do this with any accuracy (No matter how slight) is to have a sample colour in my exposure and in front of me when doing the adjustments.
I can only repeat again. This is just a simple colour guide which I personally have found very useful when shooting scenes that require me to make good reproductions of the colours photographed as the normal (If there is such a thing) eye and brain perceived them.
Of course on many occasions I have no need of such an aid and normal colour balance and pictorial pleasing colours are preferable, but for product shots and especially fashion near accurate colour under normal lighting conditions are needed.
I believe anything that can help us get it right (Percieved or accurate) is worth a try.
I have tried and used this 'Trick' for a few years always find it works. Whatever the theory, that, for me is the only thing that matters.
Nobody has shown me an easier way, but many have shown me that they have little or no concern for individual colour discrepancies, accepting them as ‘Correct balance’ or lens qualities irrelevant of them being a completely different to what the actual object looks like or is perceived to look like _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| Nach oben |
|
 |
hacksawbob
 Anmeldungsdatum: 28.02.2007 Beiträge: 1293 Wohnort: LANCS UK
|
 Verfasst am: Fr Jun 13, 2008 6:42 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 6:42 pm Titel: |
|
|
hacksawbob wrote:
Fascinating subject, I have certainly learnt more just by this discussion. Ultimately if ones brain interprets the print (in what ever light you happen to be viewing it) to be a good likeness of the orginal scene, then we have achieved the goal. Maybe there are more accurate and efficient routes to the same goal that do not require several prints to hit the correct balance, not cheap.
The interpretation by the human brain is the final step in any colour work flow, unfortunately we cannot calibrate the human brain (yet )  _________________ LENS LIST |
|
| Nach oben |
|
 |
peterqd
 Anmeldungsdatum: 28.02.2007 Beiträge: 7449 Wohnort: near High Wycombe, UK
Expire: 2014-01-04
|
 Verfasst am: Fr Jun 13, 2008 9:46 pm Titel: |
|
 Verfasst am: Fr Jun 13, 2008 9:46 pm Titel: |
|
|
peterqd wrote:
| hacksawbob hat folgendes geschrieben:: |
| Fascinating subject, I have certainly learnt more just by this discussion. |
Me too. Although Rob's idea isn't scientific, it's certainly a useful suggestion. It's similar to taking reference shots of black and white objects to calibrate the white balance. Many times I have "corrected" the colours in a picture, only to look at it later and wonder what I was seeing. _________________ Peter - Moderator |
|
| Nach oben |
|
 |
|
|