| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
ks73
Anmeldungsdatum: 14.10.2015 Beiträge: 45 Wohnort: Kokkola, Finland
|
 Verfasst am: Fr Aug 26, 2016 4:44 pm Titel: Repairing c/y Carl Zeiss Planar 100/2 |
|
 Verfasst am: Fr Aug 26, 2016 4:44 pm Titel: Repairing c/y Carl Zeiss Planar 100/2 |
|
|
ks73 wrote:
I wanted to share my little adventure
I bought some time ago Carl Zeiss Planar 100mm 2.0 AEG as faulty. There was something loose inside the lens and pictures were certainly not good. Also the lens barrel was bent. The barrel is made of such thick metal, it must have been quite a hit. It was not possible to focus to infinity, but only to a few meters at most.
Pictures turned out like this:
First I fixed the bent filter thread, using instructions found here (thanks Lloydy!): http://forum.mflenses.com/dented-filter-ring-repair-tool-t72304.html
Then I watched maybe dozen times this assembly video to figure out what to do: https://www.youtube.com/watch?v=Awz5saMnpyg
I decided to approach the front way. I unscrewed the name plate ring with rubber tool, then very carefully unscrewed the front lens group (three lenses) It comes out in one piece. I immediately noticed that the last lens of the front group and the ring locking it were completely out of their place. I set the lens to its place and screwed back the locking ring. It was easy to tighten it with spanner tool. Then I put back the front group and name plate (and went outside breathing for a minute).
Here are the test pictures (no pp, only exposure and wb adjusted):
#1 (WO):
#2 (f2.8 or f4):
#3 (f8):
There is only one thing, the lens focuses way past infinity. When the focus is at inf, the scale is at ~10m. Could it be that the barrel is on the wrong thread? The assembly video I linked shows clearly that there are several places to start screwing the focusing helicoid (at 2:30). I must say that I may not be brave enough to do a repair that! :1lg) _________________ Kalle
Flickr: https://www.flickr.com/photos/140575793@N08/ |
|
| Nach oben |
|
 |
Jiaming
 Anmeldungsdatum: 09.03.2016 Beiträge: 106
|
 Verfasst am: Fr Aug 26, 2016 5:01 pm Titel: |
|
 Verfasst am: Fr Aug 26, 2016 5:01 pm Titel: |
|
|
Jiaming wrote:
The kitty shot is great! Calibrating infinity is just a trial-and-error procedure and indeed might take quite some time. But I believe it is feasible to do it at home. Remember the angle to turn from optical infinity to engraved infinity, and mark the position where the focusing barrel screws out. Turn the barrel for the angle from marked position, and screw back in, then you should be almost there. |
|
| Nach oben |
|
 |
poilu
 Anmeldungsdatum: 26.08.2007 Beiträge: 10476 Wohnort: Greece
Expire: 2019-08-29
|
 Verfasst am: Sa Aug 27, 2016 3:31 pm Titel: |
|
 Verfasst am: Sa Aug 27, 2016 3:31 pm Titel: |
|
|
poilu wrote:
great job!
 _________________ T* |
|
| Nach oben |
|
 |
ks73
Anmeldungsdatum: 14.10.2015 Beiträge: 45 Wohnort: Kokkola, Finland
|
 Verfasst am: So Aug 28, 2016 12:50 pm Titel: |
|
 Verfasst am: So Aug 28, 2016 12:50 pm Titel: |
|
|
ks73 wrote:
Thank you!
Jiaming: I am not sure how much I should disassemble the lens before I can screw out the focusing barrel. Do you have some tips for that? _________________ Kalle
Flickr: https://www.flickr.com/photos/140575793@N08/ |
|
| Nach oben |
|
 |
Lloydy
 Anmeldungsdatum: 02.09.2009 Beiträge: 7880 Wohnort: Ironbridge. UK.
Expire: 2022-01-01
|
 Verfasst am: So Aug 28, 2016 9:33 pm Titel: |
|
 Verfasst am: So Aug 28, 2016 9:33 pm Titel: |
|
|
Lloydy wrote:
Great job, and obviously the lens was worth saving. I'm still using that little jig for bent filter threads, it must have done a few now.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Nach oben |
|
 |
Jiaming
 Anmeldungsdatum: 09.03.2016 Beiträge: 106
|
 Verfasst am: Mo Aug 29, 2016 2:37 am Titel: |
|
 Verfasst am: Mo Aug 29, 2016 2:37 am Titel: |
|
|
Jiaming wrote:
| ks73 hat folgendes geschrieben:: |
Thank you!
Jiaming: I am not sure how much I should disassemble the lens before I can screw out the focusing barrel. Do you have some tips for that? |
Honestly I do not have experiences with this particular lens so I can't make to many comments, but probably it would be the point at which the barrel can be screwed off. So I guess that should not be too far to go. Good luck! |
|
| Nach oben |
|
 |
Layer-cake
 Anmeldungsdatum: 18.03.2013 Beiträge: 560 Wohnort: Cape Town
|
 Verfasst am: Di Sep 06, 2016 9:31 am Titel: |
|
 Verfasst am: Di Sep 06, 2016 9:31 am Titel: |
|
|
Layer-cake wrote:
heres a good video that helped me out a while back
https://www.youtube.com/watch?v=Awz5saMnpyg |
|
| Nach oben |
|
 |
Gardener
 Anmeldungsdatum: 22.09.2013 Beiträge: 949 Wohnort: USA
|
 Verfasst am: Di Sep 06, 2016 4:24 pm Titel: |
|
 Verfasst am: Di Sep 06, 2016 4:24 pm Titel: |
|
|
Gardener wrote:
Great job, I've seen that video too when I was thinking/looking for info on how to approach 85/1.4. |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|