MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

making Contax/Kiev adapter for Samsung NX
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I have a crappy Kiev 4AM as donor on the lens side.

So what would be the best body side adapter to fix it in?


Reply

The Samsung NX-mount has a register distance of 25.50mm which is longer than most other MILC camera. It would be better starts with a thin adapter like this Klicke hier, um es auf Ebay zu sehen.


Reply

hmm .. 7,5 millimeters difference to Sony E .. pretty tight I'd say

compare to this
Klicke hier, um es auf Ebay zu sehen


Reply

You can do it but you may need a latch Klicke hier, um es auf Ebay zu sehen .


Reply

I hacked the front off a Contax and hot glued it to a M39 - NEX adapter with a short spacer. The focus works through the original wheel on top. It aint pretty, but it works. Wink



Reply

Usually people do from body+M39 adapter, that should works. but may not on NX indeed.


Reply

First I thought of m39 but I don't think the helicoid fits there. I think I need an adapter that is larger in diameter. Also need to grind some metal off the back of the helicoid.


Reply

calvin83 hat folgendes geschrieben::
You can do it but you may need a latch Klicke hier, um es auf Ebay zu sehen .


nice looking thing but does the helicoid really work?


Reply

kansalliskalaCafe hat folgendes geschrieben::
calvin83 hat folgendes geschrieben::
You can do it but you may need a latch Klicke hier, um es auf Ebay zu sehen .


nice looking thing but does the helicoid really work?

Sure. Check the last few photos or the video below.

https://youtu.be/czSwX76ImU0


Reply

The rim in the middle of the helicoid is about 25 mm from the film plane at infinity, so if one has a 1 mm thick adapter base, one would cut the helicoid at about where the little square hole is.



One problem is that if you cut the helicoid too short, it gets wobbly.



Outer part of the helicoid is about 41 mm outed diameter, so it fits nicely into e.g. Nikon mount, one just has to find one with a square bottom. Or take only the bottom part and attach it somehow.

like this: Klicke hier, um es auf Ebay zu sehen

Everything needs precision metal work, so I don't know if it is really doable. I can cut it myself with a grinder, but don't know about the result ..


Reply

Now that I looked at the c/k mount more carefully, I think that the solution is to get a m39 adapter and put a 41 mm hole (or so) hole in it. Then just attach it to the red arrow marked place, set the infinity and glue or solder the parts together. If there is too much tube inside the body, one can easily remove it. I just have to find a man or a woman with a lathe.