| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 7:11 am Titel: any reasonable coating service or solution? |
|
 Verfasst am: Mo Dez 14, 2015 7:11 am Titel: any reasonable coating service or solution? |
|
|
kuuan wrote:
Over the years I have accumulated quite a number of lenses that would greatly benefit if they had a coating, usually of just one element of even only one surface, repaired resp. replaced. I believe there are some services out there that do coating but which generally, for repairing other than very valuable lenses, are not recommended simply because they are expensive.
- I wonder if there hasn't come up an economical alternative e.g. out of China. Or if there even is any DIY solution just using a spray or something alike, given that it won't be a perfect solution but enough to improve a lens of which the coating already had been removed.
any info anyone? _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
DConvert
 Anmeldungsdatum: 12.06.2010 Beiträge: 984 Wohnort: Essex UK
|
 Verfasst am: Mo Dez 14, 2015 8:28 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 8:28 am Titel: |
|
|
DConvert wrote:
A DIY solution isn't going to work. the thickness of the coating is critical in getting it to work & has to be controlled to very precise tolerances. |
|
| Nach oben |
|
 |
calvin83
 Anmeldungsdatum: 12.04.2009 Beiträge: 7740 Wohnort: Hong Kong
|
 Verfasst am: Mo Dez 14, 2015 9:12 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 9:12 am Titel: |
|
|
calvin83 wrote:
There is polishing and coating service in China for much less but I would suggest you leave it as it. The lens may need to be polished before re-coating and there is risk of breaking the glass. All the cemented elements are not recommended for re-coating. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 10:09 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 10:09 am Titel: |
|
|
kuuan wrote:
thank you very much for your answers
| calvin83 hat folgendes geschrieben:: |
| There is polishing and coating service in China for much less but I would suggest you leave it as it. The lens may need to be polished before re-coating and there is risk of breaking the glass. All the cemented elements are not recommended for re-coating. |
hm Calvin, for me this still is great news, and I really would love to get the contact info for that service! In case they don't converse in English I may evenask for further help from you, Calvin
- the lens that could benefit most from re-coating is an M-Rokkor 2.8/28 that had the known 'white spots', they had gone beyond the rim and had corrupted the coating on the whole surface. It was rather unusable as it was, I took the effort and had removed / polished that bad coating already. Sharpness is much improved, but it glows badly and remains rather unusable. That is polishing already is done, and if it really broke it just would remain unusable.. Well, I have seen the same lens with the fault as bad as mine selling for 250 to 300 usd, and after my polishing it even looks clean, but I would not want to cheat anybody and as it is and declaring it's state truthfully it hardly is of much value.
Same situation with at least one more lens, and I have a few Canon LTMs with hazy element, one already polished, some 3 or 4 others not yet, but again, as is they hardly have value, as I see it they all only could benefit _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
kds315*
 Anmeldungsdatum: 12.03.2008 Beiträge: 16911 Wohnort: Kehl, Germany
Expire: 2021-03-09
|
 Verfasst am: Mo Dez 14, 2015 10:29 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 10:29 am Titel: |
|
|
kds315* wrote:
I had a source in Russia, but they stopped doing that. Not cheap though it was.
There is a seller "prolenscla" on ebay from Taiwan who offers those services incl. re-cementing: http://www.ebay.com/usr/prolenscla?_trksid=p2047675.l2559
Quote him: "Charge for lens group separation re-cementing treatment and damaged coating polishing treatment starting from US$ 150.
The actual charge depend on which kind of the lens and the size of the lens need to repair. It is necessary to negotiate between you
and me before sending me your lens." So I estimate it to be quite more actually...
On his FB site https://www.facebook.com/CLAmanualfocuslens he shows some impressive results, I must admit.
P.S.: I added this info to a Sticky here _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 10:46 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 10:46 am Titel: |
|
|
kuuan wrote:
looks impressive, but I am looking for a service that is way cheaper, actually.
And Calvin, I am thinking of not sending in the whole lens but the single elements that have to be treated only, some polishing + coating, some coating only. Actually I'd also have cemented double elements that would need re-cementing, in case I do get the service in China you know to do some work for me, do you know if they also do re-cementing? _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
kds315*
 Anmeldungsdatum: 12.03.2008 Beiträge: 16911 Wohnort: Kehl, Germany
Expire: 2021-03-09
|
 Verfasst am: Mo Dez 14, 2015 11:18 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 11:18 am Titel: |
|
|
kds315* wrote:
| kuuan hat folgendes geschrieben:: |
looks impressive, but I am looking for a service that is way cheaper, actually.
And Calvin, I am thinking of not sending in the whole lens but the single elements that have to be treated only, some polishing + coating, some coating only. Actually I'd also have cemented double elements that would need re-cementing, in case I do get the service in China you know to do some work for me, do you know if they also do re-cementing? |
Yeah, but then the clock rings and we wake up - bummer really!  _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 11:28 am Titel: |
|
 Verfasst am: Mo Dez 14, 2015 11:28 am Titel: |
|
|
kuuan wrote:
no worries and Klaus I am very good in making dreams come true, don't do much else, really  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
calvin83
 Anmeldungsdatum: 12.04.2009 Beiträge: 7740 Wohnort: Hong Kong
|
 Verfasst am: Mo Dez 14, 2015 12:28 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 12:28 pm Titel: |
|
|
calvin83 wrote:
For re-cementing, you can do it yourself with UV cement if you have the patent. The most difficult part is not gluing the elements but to separate them. My friends do it on their own too. If you want to align the elements more perfectly(for wide angle to short tele lens), you will need a device for collimation(workshops who made glasses should have one). Long focal length lenses are usually less prone to small misalignment except mirror lenses.
BTW, I heard some negative feedback from some local guys on the service mentioned above in Taiwan. There will be always some risk performing such repair. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/
Zuletzt bearbeitet von calvin83 am Di Dez 15, 2015 12:24 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 12:34 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 12:34 pm Titel: |
|
|
kuuan wrote:
my first trial to separate two elements had failed, nothing broken, but I just couldn't get them apart. - haven't given up yet  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
calvin83
 Anmeldungsdatum: 12.04.2009 Beiträge: 7740 Wohnort: Hong Kong
|
 Verfasst am: Mo Dez 14, 2015 1:18 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 1:18 pm Titel: |
|
|
calvin83 wrote:
One of the most safe way is to heat the element in oven slowly until you see there is change in the cement. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 1:53 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 1:53 pm Titel: |
|
|
kuuan wrote:
| calvin83 hat folgendes geschrieben:: |
| One of the most safe way is to heat the element in oven slowly until you see there is change in the cement. |
thank you Calvin. My next trial shall be in an oven. My first, failed trial was placing it on top of a 100W lamp, or was it a 60W only? Anyway, heat seemed not have been high enough. Or it's a cementing that won't bulge? It is from a CV Heliar LTM 2.5/75, not a very 'old' lens. _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
kds315*
 Anmeldungsdatum: 12.03.2008 Beiträge: 16911 Wohnort: Kehl, Germany
Expire: 2021-03-09
|
 Verfasst am: Mo Dez 14, 2015 2:18 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 2:18 pm Titel: |
|
|
kds315* wrote:
It might have been cemented using UV cemented, hardened by UV light.
This can't be seperated by your method. _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Nach oben |
|
 |
calvin83
 Anmeldungsdatum: 12.04.2009 Beiträge: 7740 Wohnort: Hong Kong
|
 Verfasst am: Mo Dez 14, 2015 2:43 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 2:43 pm Titel: |
|
|
calvin83 wrote:
| kds315* hat folgendes geschrieben:: |
It might have been cemented using UV cemented, hardened by UV light.
This can't be seperated by your method. |
This may help but need to be careful with the chemicals.
http://www.dymax.com/images/pdf/literature/lit079_removal_of_cured_uv_adhesives_tb.pdf _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Mo Dez 14, 2015 3:03 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 3:03 pm Titel: |
|
|
kuuan wrote:
Klaus thank's, I am afraid that this might be the case
Calvin wow, a bit frightening but great information, thank you so much for that! _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
kds315*
 Anmeldungsdatum: 12.03.2008 Beiträge: 16911 Wohnort: Kehl, Germany
Expire: 2021-03-09
|
 Verfasst am: Mo Dez 14, 2015 3:03 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 3:03 pm Titel: |
|
|
kds315* wrote:
Yes, indeed, and I would propose to only have experienced personnel do this! _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Nach oben |
|
 |
Lloydy
 Anmeldungsdatum: 02.09.2009 Beiträge: 7880 Wohnort: Ironbridge. UK.
Expire: 2022-01-01
|
 Verfasst am: Mo Dez 14, 2015 10:04 pm Titel: |
|
 Verfasst am: Mo Dez 14, 2015 10:04 pm Titel: |
|
|
Lloydy wrote:
MEK, mentioned in the data sheet, is easily available from most plumbing and building merchants as it is the solvent used to clean PVC pipework before gluing. Be very careful, it is very nasty stuff. Not only to the user, it will strip paint. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: So Dez 20, 2015 6:49 am Titel: |
|
 Verfasst am: So Dez 20, 2015 6:49 am Titel: |
|
|
kuuan wrote:
| kuuan hat folgendes geschrieben:: |
...
- the lens that could benefit most from re-coating is an M-Rokkor 2.8/28 that had the known 'white spots', they had gone beyond the rim and had corrupted the coating on the whole surface. It was rather unusable as it was, I took the effort and had removed / polished that bad coating already. Sharpness is much improved, but it glows badly and remains rather unusable... |
to put the record straight: By now, without re-coating, my M-Rokkor 2.8/28 is performing quite well. Clarity and sharpness had been improved decisively after polishing, now finally I repainted the outer rim of the lens more thoroughly and that strongly reduced blooming.
I believe that it may still bloom a bit more than a perfect copy should and that it would benefit from re-coating, but it has become quite usable again, see: http://forum.mflenses.com/viewtopic,p,1461435.html#1461435 _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|