| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
KEO
 Anmeldungsdatum: 27.09.2018 Beiträge: 813 Wohnort: USA
|
 Verfasst am: So Dez 09, 2018 12:18 am Titel: Re-Coloring Lettering on Name Ring |
|
 Verfasst am: So Dez 09, 2018 12:18 am Titel: Re-Coloring Lettering on Name Ring |
|
|
KEO wrote:
I would appreciate any tips concerning re-coloring the letters on name rings.
I just received a CZJ Triotar, and it's a real beauty but almost all the paint has vanished from the embossed letters on the name ring. I'd like to fix that.
I'll need white and a little bit of red for the "T" coating.
My first thought was enamel like I used to use for model kits when I was a kid, but I'd like to bet some advice before I try anything. I don't want to mar this beautiful lens.
Thanks. |
|
| Nach oben |
|
 |
SkedAddled
 Anmeldungsdatum: 19.10.2008 Beiträge: 1447 Wohnort: Michigan, USA
Expire: 2021-08-12
|
 Verfasst am: So Dez 09, 2018 12:40 am Titel: |
|
 Verfasst am: So Dez 09, 2018 12:40 am Titel: |
|
|
SkedAddled wrote:
Interesting.
By "Embossed," do you mean raised lettering, or undercut(engraved or stamped)?
If below the outer surface, I'd recommend a good clean with naptha or alcohol,
then applying something like fingernail polish with maybe a toothpick or
a superfine artist's brush.
If raised lettering, I'd suggest a similar approach, but application would likely
require a different method. _________________ Craig
Of course I'm all right! Why? What have you heard!?
Canon Digital EOS 5D Mk IV, EOS 50D, Powershot S3 iS
Vivitar 28 f/2.8 OM - Zuiko 50 f/1.8 OM - Tamron SP 28-80 f/3.5 AD2[Favorite!] - Hanimar 135 f/3.5 M42 - Soligor 135 f/2.8 T4 - Tamron SP 60-300 f/3.8 AD2 - Soligor 75-260 f/4.5 M42 - Soligor 400 f/6.3 T4 - Soligor 500 f/8 T2 Cat + Matched 2X TC - Addiction Growing!
This is us -- We drive these -- We're named these |
|
| Nach oben |
|
 |
dan_
 Anmeldungsdatum: 05.12.2012 Beiträge: 1070 Wohnort: Romania
Expire: 2016-12-19
|
 Verfasst am: So Dez 09, 2018 1:43 pm Titel: |
|
 Verfasst am: So Dez 09, 2018 1:43 pm Titel: |
|
|
dan_ wrote:
The professional solution is to use fill in paints. They are fat paint sticks made specially for this purpose. I am using them constantly with very good results.
Fill the embossed letters with the paint and wipe the excess, let them dry for one day and then clean the surface with a cloth with a bit of water and soap. It works perfectly and the paint, once dried completely, is very persistent, just like the original one. |
|
| Nach oben |
|
 |
KEO
 Anmeldungsdatum: 27.09.2018 Beiträge: 813 Wohnort: USA
|
 Verfasst am: So Dez 09, 2018 9:13 pm Titel: |
|
 Verfasst am: So Dez 09, 2018 9:13 pm Titel: |
|
|
KEO wrote:
| SkedAddled hat folgendes geschrieben:: |
| By "Embossed," do you mean raised lettering, or undercut(engraved or stamped)? |
Indented, not raised. They're stamped, I would think. Thanks for the suggestions.
| dan_ hat folgendes geschrieben:: |
| The professional solution is to use fill in paints |
That pen is exactly the sort of thing I was thinking of using. I'll look into it. Thank you.
EDIT: They're not that expensive, either!  |
|
| Nach oben |
|
 |
Gardener
 Anmeldungsdatum: 22.09.2013 Beiträge: 949 Wohnort: USA
|
 Verfasst am: Mo Dez 10, 2018 4:16 pm Titel: |
|
 Verfasst am: Mo Dez 10, 2018 4:16 pm Titel: |
|
|
Gardener wrote:
You can use any waterproof paint. I used to use oil-based enamel, but now switched to acrylics . |
|
| Nach oben |
|
 |
KEO
 Anmeldungsdatum: 27.09.2018 Beiträge: 813 Wohnort: USA
|
 Verfasst am: Di Dez 11, 2018 9:30 pm Titel: |
|
 Verfasst am: Di Dez 11, 2018 9:30 pm Titel: |
|
|
KEO wrote:
| Gardener hat folgendes geschrieben:: |
| I used to use oil-based enamel, but now switched to acrylics. |
Acrylics? That's interesting. I would think acrylics would be less durable, but I suppose you can easily re-apply them. |
|
| Nach oben |
|
 |
kds315*
 Anmeldungsdatum: 12.03.2008 Beiträge: 16911 Wohnort: Kehl, Germany
Expire: 2021-03-09
|
|
| Nach oben |
|
 |
DConvert
 Anmeldungsdatum: 12.06.2010 Beiträge: 984 Wohnort: Essex UK
|
 Verfasst am: Di Dez 11, 2018 11:27 pm Titel: |
|
 Verfasst am: Di Dez 11, 2018 11:27 pm Titel: |
|
|
DConvert wrote:
| KEO hat folgendes geschrieben:: |
| SkedAddled hat folgendes geschrieben:: |
| By "Embossed," do you mean raised lettering, or undercut(engraved or stamped)? |
Indented, not raised. They're stamped, I would think. Thanks for the suggestions.
| dan_ hat folgendes geschrieben:: |
| The professional solution is to use fill in paints |
That pen is exactly the sort of thing I was thinking of using. I'll look into it. Thank you.
EDIT: They're not that expensive, either!  |
Yes very cheap in black, gold, red & yellow, but the white ones seem to be sold out from all the more local sellers.
Not a critical improvement for any of my lenses, but I'm sure there will be quite a few that will improve in looks if I do get one. Hopefully I'll remember to check again after Christmas. |
|
| Nach oben |
|
 |
Gardener
 Anmeldungsdatum: 22.09.2013 Beiträge: 949 Wohnort: USA
|
 Verfasst am: Mi Dez 12, 2018 7:27 pm Titel: |
|
 Verfasst am: Mi Dez 12, 2018 7:27 pm Titel: |
|
|
Gardener wrote:
| KEO hat folgendes geschrieben:: |
| Gardener hat folgendes geschrieben:: |
| I used to use oil-based enamel, but now switched to acrylics. |
Acrylics? That's interesting. I would think acrylics would be less durable, but I suppose you can easily re-apply them. |
Less durable in what way? Adhesion? I have crankbaits repainted using the same set (and clearcoated) and they hold together just fine in much tougher environment. Solvent resistance? There's hardly ever a reason to bring harsh solvent near a repainted (meaning post-CLA) front ring. But, yes, may be they are less durable. Time will tell. |
|
| Nach oben |
|
 |
KEO
 Anmeldungsdatum: 27.09.2018 Beiträge: 813 Wohnort: USA
|
 Verfasst am: Mi Dez 12, 2018 9:57 pm Titel: |
|
 Verfasst am: Mi Dez 12, 2018 9:57 pm Titel: |
|
|
KEO wrote:
| Gardener hat folgendes geschrieben:: |
| Less durable in what way? Adhesion? I have crankbaits repainted using the same set (and clearcoated) and they hold together just fine in much tougher environment. Solvent resistance? There's hardly ever a reason to bring harsh solvent near a repainted (meaning post-CLA) front ring. But, yes, may be they are less durable. Time will tell. |
Well, the acrylics I've used solidify into a rubbery plastic. It's not really fragile, but it's not as hard as dried enamels. We may be thinking of different types of acrylics, however.
How much wear-and-tear does a name ring get, anyway? Not that much unless you're removing it over and over to get to the front element or something, and that shouldn't be happening. I would say acrylics seem like a viable alternative to consider even if they are less durable. They're certainly less toxic if that's a factor. |
|
| Nach oben |
|
 |
KEO
 Anmeldungsdatum: 27.09.2018 Beiträge: 813 Wohnort: USA
|
 Verfasst am: Do Dez 13, 2018 9:50 pm Titel: |
|
 Verfasst am: Do Dez 13, 2018 9:50 pm Titel: |
|
|
KEO wrote:
| dan_ hat folgendes geschrieben:: |
| The professional solution is to use fill in paints. They are fat paint sticks made specially for this purpose. I am using them constantly with very good results. |
Thanks again for this suggestion, dan_. These things work great. Very fast and easy, apart from the drying time.
They're like a big crayon. They have a hard crust on the outside (at least mine did) and you have to break through that to the softer paint inside. It's similar in consistency to thick cream cheese.
You smear it over the lettering, being sure to fill in all the cracks.
The trick seems to be wiping off the excess. Use a fine cloth or tissue, not something rough like a bath towel, and wipe gently. The paint comes off easy, and you don't want to scrub it out of the lettering.
I think I did a fairly poor job since it was my first time trying it, and the ring already looks quite good. |
|
| Nach oben |
|
 |
dan_
 Anmeldungsdatum: 05.12.2012 Beiträge: 1070 Wohnort: Romania
Expire: 2016-12-19
|
 Verfasst am: Fr Dez 14, 2018 4:57 pm Titel: |
|
 Verfasst am: Fr Dez 14, 2018 4:57 pm Titel: |
|
|
dan_ wrote:
You are welcome.
Yes, that's the tricky part.
I use wooden toothpicks to fill the letters and wipe the excess. Then an ear stick with wadding a bit wet and with a bit of soap to wipe around the letters (without touching them). I let the paint to dry (semi-dry, in fact) for one day and then it's easier to wipe the excess with a fine cloth or, even better, with some paper a bit wet and with a bit of soap (not to smear the paint inside the letters). |
|
| Nach oben |
|
 |
Gerald
 Anmeldungsdatum: 25.03.2014 Beiträge: 1292 Wohnort: Brazil
|
 Verfasst am: Fr Dez 14, 2018 9:56 pm Titel: |
|
 Verfasst am: Fr Dez 14, 2018 9:56 pm Titel: |
|
|
Gerald wrote:
I suppose the lettering is engraved, not simply silk-screen printed. You can use nail polish or wood paint, which exist in all colors, to restore the worn paint in the grooves. Apply nail polish or paint with a small brush without worrying too much if you get some paint out of the groove. Wait until it almost completely dry and remove the excess with a cloth folded multiple times and slightly soaked with solvent/remover. The result is suprisingly good. _________________ If raindrops were perfect lenses, the rainbow did not exist. |
|
| Nach oben |
|
 |
KEO
 Anmeldungsdatum: 27.09.2018 Beiträge: 813 Wohnort: USA
|
 Verfasst am: Mi Jan 16, 2019 9:07 pm Titel: |
|
 Verfasst am: Mi Jan 16, 2019 9:07 pm Titel: |
|
|
KEO wrote:
| dan_ hat folgendes geschrieben:: |
| I use wooden toothpicks to fill the letters and wipe the excess. Then an ear stick with wadding a bit wet and with a bit of soap to wipe around the letters (without touching them). I let the paint to dry (semi-dry, in fact) for one day and then it's easier to wipe the excess with a fine cloth or, even better, with some paper a bit wet and with a bit of soap (not to smear the paint inside the letters). |
There was a big particle of something inside the front element so I removed the ring again in order to blow it away. While I had it off the lens, I thought I'd snap a shot to post.
Like I said, I think I did a poor job just because it was my first time using this technique suggested by dan. I'm leaving it the way it is though, because I actually think it looks appropriate for a 70-year-old lens. When I started the ring was almost completely black with virtually none of the original lettering remaining.
This was really fast and really easy, and when I do it again I should be able to get a near perfect result since I know what I'm doing now.
 |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|