MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Kiev bayonet to leica screw?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I gathered a small collection of cheap old rangefinder lenses, and I'd like to Buy a cheap old film camera to use them on.
All the lenses are in contax/kiev bayonet mount, except for a beautiful jupiter 3 which has a L39 screw.
My question is: is there an adapter that will allow me to use contax lenses on L39 bodies (or the other way round)?
Or is there a kind of mount that will accept both via adapter (maybe leica M)?

Thanks.


Reply

Some have been made and sold in the past but they were very expensive.

Buy a Kiev!

They are superb, much better than a Fed of Zorki.

Also, you can take the helicoid and mount from a broken Kiev and make an adapter to use the lenses on a NEX or other MILC.


Reply

iangreenhalgh1 hat folgendes geschrieben::
Some have been made and sold in the past but they were very expensive.

Buy a Kiev!

They are superb, much better than a Fed of Zorki.

Also, you can take the helicoid and mount from a broken Kiev and make an adapter to use the lenses on a NEX or other MILC.


Thanks. I already have a couple of contax-nex adapters (one bought from Attila made from an old kiev, and a cheap outer bayonet only).
As for the cameras, based on my very first impressions, I too would choose a kiev over a fed/zorki. But if I find a way to use all my lenses on a single body, that would be determining factor.


Reply

If you need rangefinder coupling, the adapter will be very expensive Klicke hier, um es auf Ebay zu sehen or M mount Klicke hier, um es auf Ebay zu sehen. If no coupling is need, you may be able to make one from a broken kiev.


Reply

I've tried this, unfortunately the helical on the Kiev is wider than the M39 'throat' so it is impossible to go down that road. There are commercially made ones that someone has already linked to but they are very expensive.

It is possible to put the optical block of some lenses into another. I have a Helios 103 that I'd love to use on my Leica but putting the optical block into an Industar is a non-starter because of the huge rear element.

It may be worth investigating this path.


Reply

calvin83 hat folgendes geschrieben::
If you need rangefinder coupling, the adapter will be very expensive Klicke hier, um es auf Ebay zu sehen or M mount Klicke hier, um es auf Ebay zu sehen. If no coupling is need, you may be able to make one from a broken kiev.


Thanks Calvin. Yes, I need rangefinder coupling: this makes the adapter way quite hard for me.

philslizzy hat folgendes geschrieben::
I've tried this, unfortunately the helical on the Kiev is wider than the M39 'throat' so it is impossible to go down that road. There are commercially made ones that someone has already linked to but they are very expensive.

It is possible to put the optical block of some lenses into another. I have a Helios 103 that I'd love to use on my Leica but putting the optical block into an Industar is a non-starter because of the huge rear element.

It may be worth investigating this path.


Thanks Phil: that's a bit too much for my abilities, especially considering that I may end up not using the film rangefinder very often (after all I have my digitals, a couple of nice film slr kits, a medium format project, and only 24 hours per day, most of which are taken by the job that pays bills). So, for now, a kiev will have to be enough. I may be adding another L39 body later on just for the j-3, it looks like the cheaper option in the end.

Does anybody know where can I get a good working one for cheap, apart from ebay?


Reply

I would like to have good one for my two Sonnars for using on my Bessa R too. Sadly, the adapter cost 200+ which is more expensive than my Sonnar 50/1.5. Sad