| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Rick1779
 Anmeldungsdatum: 17.05.2013 Beiträge: 1207 Wohnort: Italy
Expire: 2014-06-06
|
|
| Nach oben |
|
 |
RSalles
 Anmeldungsdatum: 12.08.2012 Beiträge: 1372 Wohnort: Brazil - RS / South
|
 Verfasst am: Fr Jun 06, 2014 1:12 am Titel: |
|
 Verfasst am: Fr Jun 06, 2014 1:12 am Titel: |
|
|
RSalles wrote:
I think you make better to focus on the grain at the max magnification, then close down to f8 ( i do my scans with the exactly same lens model as yours with tubes with a Canon 5DMkII). What you used to light this negatives? Sorry, this results are really poor to my eyes, but can improve much more: you have hardware for that!
Don't give up, my first ones came even worst than yours!
Cheers,
Renato |
|
| Nach oben |
|
 |
Rick1779
 Anmeldungsdatum: 17.05.2013 Beiträge: 1207 Wohnort: Italy
Expire: 2014-06-06
|
 Verfasst am: Fr Jun 06, 2014 7:50 am Titel: |
|
 Verfasst am: Fr Jun 06, 2014 7:50 am Titel: |
|
|
Rick1779 wrote:
Yes I know, this was just a test, nex5n with Industar and no tube, film holder placed on table and the smartphone with white background as a source
Which kind of extension tube you suggest? _________________ TELLTALE
 |
|
| Nach oben |
|
 |
RSalles
 Anmeldungsdatum: 12.08.2012 Beiträge: 1372 Wohnort: Brazil - RS / South
|
 Verfasst am: Fr Jun 06, 2014 10:25 am Titel: |
|
 Verfasst am: Fr Jun 06, 2014 10:25 am Titel: |
|
|
RSalles wrote:
Hi,
Don't remember anymore the tube size, but with the 3 pieces set normally used is the smaller, number 1.
But YMMV, as I scan negatives of 120 in 2 halves and and 4x5 inch film in 4 parts. To do the same in 35mm, certainly you'll need a longer tube, or even more then just one tube. The goal is to cover more negative area with the sensor to use more sensor resolution possible with the scan.
Cheers,
Renato |
|
| Nach oben |
|
 |
Rick1779
 Anmeldungsdatum: 17.05.2013 Beiträge: 1207 Wohnort: Italy
Expire: 2014-06-06
|
 Verfasst am: Fr Jun 06, 2014 10:59 am Titel: |
|
 Verfasst am: Fr Jun 06, 2014 10:59 am Titel: |
|
|
Rick1779 wrote:
Thanks! _________________ TELLTALE
 |
|
| Nach oben |
|
 |
miran
 Anmeldungsdatum: 01.08.2012 Beiträge: 1364 Wohnort: Slovenia
|
 Verfasst am: Fr Jun 06, 2014 11:40 am Titel: |
|
 Verfasst am: Fr Jun 06, 2014 11:40 am Titel: |
|
|
miran wrote:
| Zitat: |
| But YMMV, as I scan negatives of 120 in 2 halves and and 4x5 inch film in 4 parts. To do the same in 35mm, certainly you'll need a longer tube, or even more then just one tube. The goal is to cover more negative area with the sensor to use more sensor resolution possible with the scan. |
Not strictly necessary. Resolution of good film in 35mm format is about 6 megapixels. If you're "scanning" at a bigger resolution, you're just scanning grain. But yeah, try to find a lens/tube combination that will allow you to fill the sensor frame with the negative reasonably well and it will be fine. Also close the lens to about f/5.6 or f/8 for maximum sharpness and make sure the lens is as perpendicular to the film as possible. And of course the negative must be completely flat. |
|
| Nach oben |
|
 |
Rick1779
 Anmeldungsdatum: 17.05.2013 Beiträge: 1207 Wohnort: Italy
Expire: 2014-06-06
|
 Verfasst am: Fr Jun 06, 2014 12:13 pm Titel: |
|
 Verfasst am: Fr Jun 06, 2014 12:13 pm Titel: |
|
|
Rick1779 wrote:
I've tried with same lens on bellows, this single frame is 6 stitced images. I still have some problems with back light (that spot in the sky)
 _________________ TELLTALE
 |
|
| Nach oben |
|
 |
RSalles
 Anmeldungsdatum: 12.08.2012 Beiträge: 1372 Wohnort: Brazil - RS / South
|
 Verfasst am: Fr Jun 06, 2014 12:48 pm Titel: |
|
 Verfasst am: Fr Jun 06, 2014 12:48 pm Titel: |
|
|
RSalles wrote:
Dave,
Please send him the youtube link with your lightning setup - which I use to scan, it just works flawlessly!
Cheers,
Renato |
|
| Nach oben |
|
 |
PhantomLord
 Anmeldungsdatum: 08.04.2013 Beiträge: 472 Wohnort: Szczecin, Poland
|
 Verfasst am: So Jun 08, 2014 7:35 pm Titel: |
|
 Verfasst am: So Jun 08, 2014 7:35 pm Titel: |
|
|
PhantomLord wrote:
Hi Rick,
I agree with miran that scanning 35mm negative in several shots and then stitching is well... probably not the best idea.
Before I found reliable lab in my town, I tried DSLR scanning with Canon 600d + Pentax-M 50/1.7 on 32mm extension tube.
For me it worked quite well and you can see results here: http://forum.mflenses.com/fuji-superia-200-super-takumar-55-2-and-tamron-02b-28-2-5-t65997.html in this setup I used tripod for camera and I secured piece of glass as negative holder to the piece of wood so it will be stable
My first test with my initial setup here: http://forum.mflenses.com/dslr-scan-vs-pro-scan-test-shots-opinions-nee-t65434.html
I've used small LED torch to help during focusing and with lens wide open, then I stopped lens to f/8 and switched off torch and make the shot. With stable tripod and secured negative holder I was checking focus every several frames, while with my first setup I was focusing every single frame.
Cheers
Mateusz _________________ Mateusz
No good story ever starts with drinking tea.
Flickr: http://www.flickr.com/photos/mateuszmolik/sets/ |
|
| Nach oben |
|
 |
Rick1779
 Anmeldungsdatum: 17.05.2013 Beiträge: 1207 Wohnort: Italy
Expire: 2014-06-06
|
 Verfasst am: Mo Jun 09, 2014 7:35 am Titel: |
|
 Verfasst am: Mo Jun 09, 2014 7:35 am Titel: |
|
|
Rick1779 wrote:
thanks, I will work on it _________________ TELLTALE
 |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|