| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Mo Feb 03, 2014 11:16 pm Titel: Do you guys get 1 adapter and switch out lenses or multiple? |
|
 Verfasst am: Mo Feb 03, 2014 11:16 pm Titel: Do you guys get 1 adapter and switch out lenses or multiple? |
|
|
emaq wrote:
I'm sure a lot of you guys have multiple lenses and it'll get pretty expensive. Do you just do 1 adapter and switch out lenses? Any problems of doing that a lot? Or does it get annoying enough to get invest in a bunch of them? |
|
| Nach oben |
|
 |
tb_a
 Anmeldungsdatum: 26.01.2010 Beiträge: 3679 Wohnort: Austria
Expire: 2019-08-28
|
 Verfasst am: Mo Feb 03, 2014 11:43 pm Titel: |
|
 Verfasst am: Mo Feb 03, 2014 11:43 pm Titel: |
|
|
tb_a wrote:
Depends on the lens. If lenses have screw mounts it does make sense to have several adapters (i.e. M42 to PK or M39 to Leica M); if not it doesn't make any difference if lens is changed on adapter or camera bajonet.
At least that's the way I see it. Therefore I have several adapters (per lens) M39 to Leice M and M42 to Minolta AF, etc.
Greets, Thomas _________________ Thomas Bernardy
Manual focus lenses mainly from Minolta, Pentax, Voigtlaender, Leitz, Topcon and from Russia (too many to be listed here). |
|
| Nach oben |
|
 |
ZoneV
 Anmeldungsdatum: 09.11.2009 Beiträge: 1633 Wohnort: Germany
Expire: 2011-12-02
|
 Verfasst am: Mo Feb 03, 2014 11:51 pm Titel: |
|
 Verfasst am: Mo Feb 03, 2014 11:51 pm Titel: |
|
|
ZoneV wrote:
I own a lot of lenses, and several adapters for Canon EOS DSLR.
I don´t like to change adapters during a photo-trip - sometimes I am in sand, or near a river - an adapter could fall down and get lost - and then probably several lenses are no more usable on this trip. But at home I change the adapters a lot between lenses. But one I searched more than an hour to find my single PK-EF adapter - without luck.
I have no problem to interchange Nikon F, Pentax K, M42, Exakta lens mount adapters for the suitable lenses.
But with some Contax/Yashica lenses I have to take the right one of my several C/Y-EOS adapters, because of infinity setting and mirror hang-up on EOS 5D. So this system is for me with my lenses a bit more problematic than the rest. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Nach oben |
|
 |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Di Feb 04, 2014 12:08 am Titel: |
|
 Verfasst am: Di Feb 04, 2014 12:08 am Titel: |
|
|
emaq wrote:
| ZoneV hat folgendes geschrieben:: |
I own a lot of lenses, and several adapters for Canon EOS DSLR.
I don´t like to change adapters during a photo-trip - sometimes I am in sand, or near a river - an adapter could fall down and get lost - and then probably several lenses are no more usable on this trip. But at home I change the adapters a lot between lenses. But one I searched more than an hour to find my single PK-EF adapter - without luck.
|
Ahh I see. So is it hard to keep the adapter on the body and then remove the lens? Or remove the lens+adapter combo is the more preferred way? It'll be for a Sony A7 that I'll get picking up in a few weeks. Watched a video on youtube and a guy has a couple of Voigtlander lenses and uses an adapter for each and I thought "hmmm? just remove the lens and leave the adapter on"
Or is that not the correct way to remove the it? |
|
| Nach oben |
|
 |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Di Feb 04, 2014 12:10 am Titel: |
|
 Verfasst am: Di Feb 04, 2014 12:10 am Titel: |
|
|
emaq wrote:
| ZoneV hat folgendes geschrieben:: |
I own a lot of lenses, and several adapters for Canon EOS DSLR.
I don´t like to change adapters during a photo-trip - sometimes I am in sand, or near a river - an adapter could fall down and get lost - and then probably several lenses are no more usable on this trip. But at home I change the adapters a lot between lenses. But one I searched more than an hour to find my single PK-EF adapter - without luck.
|
Ahh I see. So is it hard to keep the adapter on the body and then remove the lens? Or remove the lens+adapter combo is the more preferred way? It'll be for a Sony A7 that I'll get picking up in a few weeks. Watched a video on youtube and a guy has a couple of Voigtlander lenses and uses an adapter for each and I thought "hmmm? just remove the lens and leave the adapter on"
Or is that not the correct way to remove the it? |
|
| Nach oben |
|
 |
strangelove
 Anmeldungsdatum: 04.04.2013 Beiträge: 106 Wohnort: Los Angeles, CA
|
 Verfasst am: Di Feb 04, 2014 12:21 am Titel: |
|
 Verfasst am: Di Feb 04, 2014 12:21 am Titel: |
|
|
strangelove wrote:
I prefer to have an adapter for each lens I take on a shoot, but it's just for simplicity - I shoot on Canon EOS, and I've accumulated a couple Canon rear caps, so it just seems easier to remove a lens and the adapter from the body and switch the rear cap with the one I'm replacing. |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Di Feb 04, 2014 4:11 am Titel: |
|
 Verfasst am: Di Feb 04, 2014 4:11 am Titel: |
|
|
kuuan wrote:
| emaq hat folgendes geschrieben:: |
| ZoneV hat folgendes geschrieben:: |
I own a lot of lenses, and several adapters for Canon EOS DSLR.
I don´t like to change adapters during a photo-trip - sometimes I am in sand, or near a river - an adapter could fall down and get lost - and then probably several lenses are no more usable on this trip. But at home I change the adapters a lot between lenses. But one I searched more than an hour to find my single PK-EF adapter - without luck.
|
Ahh I see. So is it hard to keep the adapter on the body and then remove the lens? Or remove the lens+adapter combo is the more preferred way? It'll be for a Sony A7 that I'll get picking up in a few weeks. Watched a video on youtube and a guy has a couple of Voigtlander lenses and uses an adapter for each and I thought "hmmm? just remove the lens and leave the adapter on"
Or is that not the correct way to remove the it? |
On my NEX, same mount as your A7 to be, mostly I find changing the adapter + lens combination easier to change than the lens on the adapter. Main reason must be that the adapters aren't as well made and lenses on some don't mount / unmount as smooth as the adapters themselves mount on the camera. That a lens with it's adapter already mounted not necessarily must be but often proved to be easier and faster to mount / unmount than the lens on the adapter. _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Di Feb 04, 2014 2:27 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 2:27 pm Titel: |
|
|
emaq wrote:
| kuuan hat folgendes geschrieben:: |
On my NEX, same mount as your A7 to be, mostly I find changing the adapter + lens combination easier to change than the lens on the adapter. Main reason must be that the adapters aren't as well made and lenses on some don't mount / unmount as smooth as the adapters themselves mount on the camera. That a lens with it's adapter already mounted not necessarily must be but often proved to be easier and faster to mount / unmount than the lens on the adapter. |
I just started to look at all the different kinds of adapters out there. Looks like there are a bunch of cheap ones. I'll start by getting a few of those (3 or 4) for each of my favorite lenses. And eventually work my way up the scale to get a better Fotodiox one which seems to be the more expensive type.
So the less taking on and off of the adapters will do less wear eventually I guess in a long run.
Excited to see my lenses again on a full frame without the darkroom work!! |
|
| Nach oben |
|
 |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Di Feb 04, 2014 3:14 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 3:14 pm Titel: |
|
|
philslizzy wrote:
If I'm going out with the NEX and a bunch of Rokkors, I just use the one adapter although the wides share my lens turbo. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Di Feb 04, 2014 3:59 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 3:59 pm Titel: |
|
|
Jesito wrote:
Depends on the mount, usually a single adapter for the same kind of mount.
But in some cases like the Exakta adapter for EOS, that is too thin and there is a screw to loosen/tight, I do prefer to use a single adapter for each good lens, plus one to share among the others (to save assembling efforts). _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
SonicScot
 Anmeldungsdatum: 01.12.2011 Beiträge: 2697 Wohnort: Scottish Highlands
|
 Verfasst am: Di Feb 04, 2014 5:25 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 5:25 pm Titel: |
|
|
SonicScot wrote:
I shoot with a Canon 5D Mkll and a 7D, some of my lenses are listed below.
Every lens I own has it's own adapter, I never change adapters between lenses.
I tend to buy the cheaper adapters, sometimes the adapter needs adjusting to get infinity right. Therefore, once the adapter is set up for a lens it stays on there for ever. Each lens has it's own rear cap. _________________ Gary
Currently active gear....
Sony a7
E-M1 Mkll
Rubinar 1000/10 + 2x matched extender
Tamron 500/8 55BB
Sigma 100-300/4
Vivitar Series 1.... 200/3, 70-210/3.5 (V1 by Kiron), 135/2.3, 105/2.5 macro, 90/2.5 macro (Bokina), 90-180/4.5 Flat Field Macro, 28-90mm f/2.8-3.5
Carl Zeiss.... 180/2.8, 135/3.5, 85/1.4, 35/2.4 Flektagon, 21/2.8 Distagon
Nikon.... 55/3.5 micro, 50/1.2
Elicar 90/2.5 V-HQ Macro
Zhongyi Speedmaster 85/1.2
Jupiter-9 85/2
Helios.... 58/2 44-3
Hartblei 45/3.5 Super-Rotator TS-PC
Zenitar 16/2.8 fisheye
Samyang 8/3.5 fisheye
Nodal Ninja 4, Neewer leveling tripod base
Flickr http://www.flickr.com/photos/gazsus/ Website http://garianphotography.co.uk/ |
|
| Nach oben |
|
 |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Di Feb 04, 2014 5:35 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 5:35 pm Titel: |
|
|
emaq wrote:
| SonicScot hat folgendes geschrieben:: |
I
I tend to buy the cheaper adapters, sometimes the adapter needs adjusting to get infinity right. |
What do you mean by this? What adjustments do you do to the adapter? |
|
| Nach oben |
|
 |
GeorgeSalt
 Anmeldungsdatum: 09.02.2013 Beiträge: 336 Wohnort: Norfolk, UK
|
 Verfasst am: Di Feb 04, 2014 6:15 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 6:15 pm Titel: |
|
|
GeorgeSalt wrote:
For my Canon 40D I have half-a-dozen or so chipped adapters that tend to stay on the m42 lens they're attached to because the chip has been programmed with their focal length and maximum aperture. I also have a couple of non-chipped adapters that do for quick lens testing or to be shared amongst lenses not worth their own chipped adapter. Programming a chipped adapter takes a little time and a lot of concentration.
For QBM lenses there wasn't much option - the adapter replaced part of the original mount and requires a couple of screwdrivers, steady hands, a workbench and a fifteen minutes to switch.
Since moving to a Fuji mirror-less camera I'm going to stick to one adapter per mount system. There isn't the same chipped-adapter advantage/penalty. I might eventually add semi-duplicates (tilt/shift versions). |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Di Feb 04, 2014 6:37 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 6:37 pm Titel: |
|
|
kuuan wrote:
actually I only own one adapter for each mount, it's just that I have noticed that changing lenses ( of different mount then ) that already have the adapter mounted often is faster than changing lenses with the same adapter already mounted on the camera. But this depends on the mount ( think FD ) and of how well the adapter is made.
I would suggest to the OP to first get only one adapter for each mount and see himself of which it might be helpful to have more _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Di Feb 04, 2014 7:19 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 7:19 pm Titel: |
|
|
emaq wrote:
| kuuan hat folgendes geschrieben:: |
| actually I only own one adapter for each mount, it's just that I have noticed that changing lenses ( of different mount then ) that already have the adapter mounted often is faster than changing lenses with the same adapter already mounted on the camera. |
Yah, I was thinking one adapter, one brand for now. Then practice see how fast I can do it. I have some interesting projects coming up and when I was using my Canon digital, I needed to be backstage at a venue. I laid all my lenses on an apple crate so I can pop one in and pop one out when I needed it. When I do this again with my manual focus primes, I'll need an adapter just for speed.
But I guess this will be a future thing. For now, I should get 1 per and just have fun with it. |
|
| Nach oben |
|
 |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Di Feb 04, 2014 8:41 pm Titel: |
|
 Verfasst am: Di Feb 04, 2014 8:41 pm Titel: |
|
|
philslizzy wrote:
I have a three brands of MD adapters, this mount seems to give me more problems than any other, mainly due to the fact that the mechanism that goes into the flange slot being flimsy. I do only take one out with me though.
I have a number of m39 adapters useful for adapting old rangefinder lenses and such, these tend to be permanent so I go through a few.
Plus when using m39 lenses an adapter on each is faster than unscrewing them every time.
As someone said, buy one for each of your lens fittings and see if you need more. I suspect not.
I have adapters for:
Minolta MD 3x plus a Lens Turbo
Minolta AF 1x
Nikon F 2x
Nikon AF 1x
Pentax PK 1x
M42 2x
M39, 4x
Olympus OM 1x
Canon FD 1x
Konica F 1x
Home made:
Cintar 1x
Braun B39 1x
Altix 1x
Aka 1X
M42-NEX adapter for bellows. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
emaq
Anmeldungsdatum: 22.02.2013 Beiträge: 23 Wohnort: SoCal
|
 Verfasst am: Mi Feb 05, 2014 5:27 pm Titel: |
|
 Verfasst am: Mi Feb 05, 2014 5:27 pm Titel: |
|
|
emaq wrote:
| philslizzy hat folgendes geschrieben:: |
I have a three brands of MD adapters, this mount seems to give me more problems than any other, mainly due to the fact that the mechanism that goes into the flange slot being flimsy. I do only take one out with me though.
|
I have a bunch of Rokkors that I really like. Which brand adapter do you have for those? I was looking to get about 4 or so of the Neewer brand from Amazon. Looks like it focuses past infinity (according to some reviews) but that shouldn't be a problem. |
|
| Nach oben |
|
 |
SonicScot
 Anmeldungsdatum: 01.12.2011 Beiträge: 2697 Wohnort: Scottish Highlands
|
 Verfasst am: Fr Feb 07, 2014 8:07 am Titel: |
|
 Verfasst am: Fr Feb 07, 2014 8:07 am Titel: |
|
|
SonicScot wrote:
| emaq hat folgendes geschrieben:: |
| SonicScot hat folgendes geschrieben:: |
I
I tend to buy the cheaper adapters, sometimes the adapter needs adjusting to get infinity right. |
What do you mean by this? What adjustments do you do to the adapter? |
Sometimes an adapter needs a thin paper or metal ring between the adapter and the lens to stop the lens going beyond infinity. _________________ Gary
Currently active gear....
Sony a7
E-M1 Mkll
Rubinar 1000/10 + 2x matched extender
Tamron 500/8 55BB
Sigma 100-300/4
Vivitar Series 1.... 200/3, 70-210/3.5 (V1 by Kiron), 135/2.3, 105/2.5 macro, 90/2.5 macro (Bokina), 90-180/4.5 Flat Field Macro, 28-90mm f/2.8-3.5
Carl Zeiss.... 180/2.8, 135/3.5, 85/1.4, 35/2.4 Flektagon, 21/2.8 Distagon
Nikon.... 55/3.5 micro, 50/1.2
Elicar 90/2.5 V-HQ Macro
Zhongyi Speedmaster 85/1.2
Jupiter-9 85/2
Helios.... 58/2 44-3
Hartblei 45/3.5 Super-Rotator TS-PC
Zenitar 16/2.8 fisheye
Samyang 8/3.5 fisheye
Nodal Ninja 4, Neewer leveling tripod base
Flickr http://www.flickr.com/photos/gazsus/ Website http://garianphotography.co.uk/ |
|
| Nach oben |
|
 |
Nordentro
 Anmeldungsdatum: 24.06.2010 Beiträge: 4738 Wohnort: Lillehammer, Norway
Expire: 2015-01-29
|
 Verfasst am: Fr Feb 07, 2014 8:57 am Titel: |
|
 Verfasst am: Fr Feb 07, 2014 8:57 am Titel: |
|
|
Nordentro wrote:
I have multiple screw mount adapters (C-mount, m39 and m42) because it`s faster and easier to switch lenses if I carry more than one of the same mount, and I only have one adapter of the bayonet types.  _________________ Lars | Manuellfokus.no |
|
| Nach oben |
|
 |
|
|