MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Disassembling and adapting of non interchangeable lenses
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Does anyone have experience with disassembling and adapting of non interchangeable lenses from telemetric bodies to DSLR EOS or to mirrorless cameras.
Please, show any links with exsamples from own experience or from other people.
I have Porst Amicor 1.7/45mm from Porsr SE18, Industar-70 2.8/50mm from Sokol automat, Triplet 69-3 4/40mm from Vilia.
Thank you!




[/img]


Reply

I think adapting to EOS (or any DSLR) and retaining infinity focus will not be possible. Adapting to mirrorless is the only option.

The amount of work involved depends on the camera. Cameras like these are all so different there can be no simple guide. You have to take the lens out and work it out from there.

I have adapted lenses from a Minolta HiMatic and Konica C35 and posted threads on this forum.

http://forum.mflenses.com/minolta-45mm-f1-8-lens-from-hi-matic-7-on-oly-epl1-t42906.html

http://forum.mflenses.com/konica-38mm-f2-8-from-c35-converted-for-m4-3-t47029.html

The most important things to check are:
Can the lens be removed as a compete unit?
Does the lens have an aperture as part of that unit?

With the Konica, the aperture stays with the camera and so more work was required to retro-fit an new one.

If you want easier lenses to adapt, go for fixed lens cameras from the 1950s and 1960s. These are often derived from shuttered lenses of the type used on folding cameras and as such tend to be complete units and easy to remove. They are mainly triplets and Tessars. Focusing is often done by moving the front element, which is not ideal as performance is often degraded from the infinity setting. With a mirrorless camera, they can be mounted on a focusing helicoid to remove the need to use the front element focusing. I have a number of remounts like this.

I notice one of the lenses you have is a "Triplet 69-3" 40mm f4. I don't know if the lenses are related, but I have a LOMO T-43 40mm f4 which is a bit different to the lenses from many fixed lens cameras. The optical assembly is very small and has the aperture within it (controlled from a fiddly ring on the front). The outer body of the lens assembly is threaded for focusing. Remounting this is thus quite straightforward. Theoretically, this could be mounted inside the mount of an EOS camera, but whether the back of the lens would hit the mirror i cannot say.

The LOMO is a sharp lens with good colour but flares easily. Mine came from a Cosmic 35 , which is a UK rebrand of a Soviet camera (I can't remember which).

Mark