MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

My first set of bellows
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I needed to make a replacement set of bellows for the half plate/5x7 Lancaster Instantograph I'm restoring. I'd never tried to do anything like this before but it came out pretty nice I think. I didn't skimp on the materials, they are very robust as I used a double layer construction, the inner layer is rubberised blackout material for lining curtains, one side is white rubber, the other is black velveteen. The outer layer is red leatherette. Each of the four sides has 21 cardboard stiffener pieces. The folds are 20mm, the stiffeners are 15mm wide, cutting 84 stiffeners then gluing them with impact adhesive to the inner material was rather tedious and time consuming. The two layers are laminated together with a generous layer of impact adhesive (red Evostik) and I placed the seam of the inner on the opposite side to the seam of the outer, so the bellows are extremely strong, I doubt there will ever be any risk of holes or leaks in this thing, it's built to last.






Reply

Ian,

Much stronger, robust and well made then the normal Sinar bellows I bought few weeks ago, which seems to be made of paper... Congrats! Want to see it fitted to the camera,

Cheers,

Renato


Reply

Cheers Renato.

I haven't seen a set of Sinar bellows in the flesh, so to speak. if you have problems with them, I could have a go at making you a set.

I've got to polish all the wood and brass next, then I can install the bellows. Winter here is useless for photography, so dark and gray, so little projects like this are essential to keep oneself occupied.

This is the camera they are for, the original bellows were red sealskin, smelt foul and dusty and tore to pieces when I stretched them out to measure.



Reply

wow big job ! well done!


Reply

Nice job Ian, that's going to look very nice when it's finished.

There's a charity warehouse place that I go to that sells all kinds of stuff, mainly leftovers and reject stuff from factories, and they have a lot of roll ends and part rolls of leathercloth for pence per meter. Send me an off cut of the stuff you've used and I'll see if they have any of the same quality if you want some more.

I came across this site last night, if you haven't already seen it.

http://pheugo.com/cameras/index.php?page=folders&WEBMGR=143c9cd5c59d5a5c3b0a83b9dfc978bd

that looks like good instructions for making bellows.


Reply

Cheers Dave. What I could do with is the thinnest leathercloth you can find, this stuff was a bit too thick so the folds at the corners aren't perfect and the bellows are rather rigid, but they will work alright. Thinner would be better though.

Now I'm gonna make an 8x10 set, first step towards making an 8x10 camera. Smile