| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Do Sep 12, 2013 11:47 pm Titel: NEXotar |
|
 Verfasst am: Do Sep 12, 2013 11:47 pm Titel: NEXotar |
|
|
philslizzy wrote:
Remembering Kuuan's post about adapting a Minotar lens from a dead Minox I did the same. I bought a bunch of cameras sold for spares repair. There was a Minox GL amongst them in its little jewel box. The camera was dead, half disassembled. So a prime candidate for some adapting. I removed it much as Kuuan did in his topic (http://forum.mflenses.com/gxrotar-or-nexotar-new-life-for-a-minotar-t59038,highlight,%2Bminotar.html)
The shutter was kept open by gluing it after removing the springs. The whole lens assembly was so neat. Just a couple of 'legs' where the body fitted to the camera. I snipped them off and ended up with a neat little lens complete with working focus and aperture.
I used a reverse adaptor to attach it to the camera. First I held the lens in front of the adapter, I found infinity was just about 1mm further out than the filter thread of the ring.
I cut a disc out of a piece of thin MDF from a picture frame, just a little wider than the 49mm filter thread using a hole saw. I then cut a a smaller hole out of it using a hole saw about the diameter of the lens. Then sanded all the bits. The lens fitted into the hole with about a millimetre to spare. I used electricians tape to wind round the end 4mm of the lens barrel. About 4 times round it fitted snugly.
I fitted the lens into the ring which I'd glued onto the reversing ring and set it to infinity. I focused on a roof about 150 yards away by sliding the lens in and out. When I got good focus I lay down the adapter and used a spirit level to get it straight. I re checked the infinity then glued the lens into place from the back of the adapter.
Like Yuuan I used the little 'cone' inside the lens to tidy up the inside, tacking it in place first I used epoxy putty to fill all the gaps and make the whole thing good and solid.
A little matt black paint and the job's a good un. I cant wait to try it out.
I recycled the viewfinder too, I'm going adapt that to use that on my Contax for the Jupiter 12. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
Lloydy
 Anmeldungsdatum: 02.09.2009 Beiträge: 7880 Wohnort: Ironbridge. UK.
Expire: 2022-01-01
|
 Verfasst am: Fr Sep 13, 2013 12:08 am Titel: |
|
 Verfasst am: Fr Sep 13, 2013 12:08 am Titel: |
|
|
Lloydy wrote:
Love it!  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Nach oben |
|
 |
SonicScot
 Anmeldungsdatum: 01.12.2011 Beiträge: 2697 Wohnort: Scottish Highlands
|
 Verfasst am: Fr Sep 13, 2013 12:32 am Titel: |
|
 Verfasst am: Fr Sep 13, 2013 12:32 am Titel: |
|
|
SonicScot wrote:
A grand bit of DIY there  _________________ Gary
Currently active gear....
Sony a7
E-M1 Mkll
Rubinar 1000/10 + 2x matched extender
Tamron 500/8 55BB
Sigma 100-300/4
Vivitar Series 1.... 200/3, 70-210/3.5 (V1 by Kiron), 135/2.3, 105/2.5 macro, 90/2.5 macro (Bokina), 90-180/4.5 Flat Field Macro, 28-90mm f/2.8-3.5
Carl Zeiss.... 180/2.8, 135/3.5, 85/1.4, 35/2.4 Flektagon, 21/2.8 Distagon
Nikon.... 55/3.5 micro, 50/1.2
Elicar 90/2.5 V-HQ Macro
Zhongyi Speedmaster 85/1.2
Jupiter-9 85/2
Helios.... 58/2 44-3
Hartblei 45/3.5 Super-Rotator TS-PC
Zenitar 16/2.8 fisheye
Samyang 8/3.5 fisheye
Nodal Ninja 4, Neewer leveling tripod base
Flickr http://www.flickr.com/photos/gazsus/ Website http://garianphotography.co.uk/ |
|
| Nach oben |
|
 |
ForenSeil
 Anmeldungsdatum: 15.04.2011 Beiträge: 2731 Wohnort: Kappeln, Schleswig-Holstein, Germany.
|
 Verfasst am: Fr Sep 13, 2013 10:18 am Titel: |
|
 Verfasst am: Fr Sep 13, 2013 10:18 am Titel: |
|
|
ForenSeil wrote:
Nice! I would love to see some results _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Nach oben |
|
 |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Fr Sep 13, 2013 11:59 am Titel: |
|
 Verfasst am: Fr Sep 13, 2013 11:59 am Titel: |
|
|
philslizzy wrote:
Going to use it at weekend!! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
kuuan
 Anmeldungsdatum: 14.01.2008 Beiträge: 4569 Wohnort: right now: Austria
Expire: 2014-12-26
|
 Verfasst am: Sa Sep 14, 2013 5:09 pm Titel: |
|
 Verfasst am: Sa Sep 14, 2013 5:09 pm Titel: |
|
|
kuuan wrote:
very nice Phil congrats!
my adaptation to M mount was a bit tricky, to keep the aperture ring working I had to recess the whole lens inside the cap used as mount.
I have seen very good photos taken with this lens, but I had been a bit disappointed with mine. Biggest reason is that coatings are not good. Only after having adapted the lens I learned that later Minotars have better coatings, mine comes from the very first line of Minox cameras and certainly has very weak coatings. I hope that your's will prove to be better!
cheers, andreas _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Nach oben |
|
 |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Sa Sep 14, 2013 10:28 pm Titel: |
|
 Verfasst am: Sa Sep 14, 2013 10:28 pm Titel: |
|
|
philslizzy wrote:
| kuuan hat folgendes geschrieben:: |
very nice Phil congrats!
my adaptation to M mount was a bit tricky, to keep the aperture ring working I had to recess the whole lens inside the cap used as mount.
I have seen very good photos taken with this lens, but I had been a bit disappointed with mine. Biggest reason is that coatings are not good. Only after having adapted the lens I learned that later Minotars have better coatings, mine comes from the very first line of Minox cameras and certainly has very weak coatings. I hope that your's will prove to be better!
cheers, andreas |
Thank you Andreas, your photos were great, thats why I was inspired to do this when one came my way. here are some photos taken this morning. Not too many I had about 5 lenses to test!
The lens flared like hell so there is auto contrast applied. nothing else.
 _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|