| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Sa Jul 13, 2013 9:47 pm Titel: Zeiss Nettar 517-16 |
|
 Verfasst am: Sa Jul 13, 2013 9:47 pm Titel: Zeiss Nettar 517-16 |
|
|
philslizzy wrote:
I recently took delivery of this fine little camera. In good condition overall, a bit of paint scraped from the back but otherwise nice. The shutter seems to be running slow, it fires like this 'kerrlick' instead of click. So no film thru it yet. has anyone any idea how to get the shutter working nicely? I'm tempted to open it and try the lighter fuel method but I'm afraid to as I may unscrew the wrong thing.
The camera has a Novar 75mm f6.3 lens and a vario shutter with speeds of B, 1/25, 1/75, and 1/200. Are the shutter speeds fixed or does the vario allow me to select in between speeds?
I am away for 10 days with only my P&S and Olympus Trip. Oh, and wife, so i may not be able to read any replies right away. Thanks in advance!
Phil _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mo Jul 15, 2013 2:04 am Titel: |
|
 Verfasst am: Mo Jul 15, 2013 2:04 am Titel: |
|
|
luisalegria wrote:
Lighter fluid method should work very well, this is a Prontor shutter.
I have fixed @ 20 of these sorts of cameras including a couple of Nettars.
Main difficulty is that to open it you will have to remove the front lens assembly.
First remove the bezel, which should be held by small setscrews on the sides
Then turn the front cell until it comes off.
Then unscrew the cell that holds the second element from the shutter body. This can be very tight.
There are several ways the front plate is held on the shutter; alternately you may just leave the front plate on and just squirt lighter fluid in there on the shutter blades, that may suffice.
Work the shutter a few times while wet, make sure timing is about right, let dry, test again, treat again with lighter fluid if not good, etc.
Clean all the glass surfaces while you're at it, there is probably haze.
Then reassemble. Here comes the hard part.
Reset infinity.
I usually make a "groundglass" of plastic and I tape it on to the film gate.
Then I turn the front cell until I get infinity on the groundglass.
Then I stick the bezel back on properly aligned to infinity. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mo Jul 15, 2013 2:06 am Titel: |
|
 Verfasst am: Mo Jul 15, 2013 2:06 am Titel: |
|
|
luisalegria wrote:
Oh, you said Vario - also a Gauthier shutter like the Prontor.
Same thing I said, the Vario is just simpler version of the Prontor. Same fix. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
martinsmith99
 Anmeldungsdatum: 31.08.2008 Beiträge: 7029 Wohnort: S Glos, UK
Expire: 2013-11-18
|
 Verfasst am: Mo Jul 15, 2013 6:08 am Titel: |
|
 Verfasst am: Mo Jul 15, 2013 6:08 am Titel: |
|
|
martinsmith99 wrote:
Ah, the `fun' of old cameras. _________________ Casual attendance these days |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Mo Jul 15, 2013 12:22 pm Titel: |
|
 Verfasst am: Mo Jul 15, 2013 12:22 pm Titel: |
|
|
Attila wrote:
Congrats, certainly you can select from speeds. |
|
| Nach oben |
|
 |
philslizzy
 Anmeldungsdatum: 07.08.2012 Beiträge: 4753 Wohnort: Cheshire, England
|
 Verfasst am: Do Jul 25, 2013 10:56 pm Titel: |
|
 Verfasst am: Do Jul 25, 2013 10:56 pm Titel: |
|
|
philslizzy wrote:
| luisalegria hat folgendes geschrieben:: |
Lighter fluid method should work very well, this is a Prontor shutter.
I have fixed @ 20 of these sorts of cameras including a couple of Nettars.
Main difficulty is that to open it you will have to remove the front lens assembly.
First remove the bezel, which should be held by small setscrews on the sides
Then turn the front cell until it comes off.
Then unscrew the cell that holds the second element from the shutter body. This can be very tight.
There are several ways the front plate is held on the shutter; alternately you may just leave the front plate on and just squirt lighter fluid in there on the shutter blades, that may suffice.
Work the shutter a few times while wet, make sure timing is about right, let dry, test again, treat again with lighter fluid if not good, etc.
Clean all the glass surfaces while you're at it, there is probably haze.
Then reassemble. Here comes the hard part.
Reset infinity.
I usually make a "groundglass" of plastic and I tape it on to the film gate.
Then I turn the front cell until I get infinity on the groundglass.
Then I stick the bezel back on properly aligned to infinity. |
Thanks for the information, thats a job for the next few days. Oh, BTW i use fresh laminating film as 'ground glass' for focus testing. Its cheap and can be cut to any size. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|