MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

TA1 adapter
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Is anyone familiar with a "TA1" adapter?

The side of the adapter nearest the camera is threaded male. Cannot see the other side.

I thought possibly it could be a TAI adapter, but I would expect the threaded portion of a TAI adapter to have a female thread.

Is anyone familiar with an adapter having a male thread on one side and labelled "TA1"? Question


Reply

Just to lay down a record here, I think I have the answer to this:

It's a routine T or T2 mount to M42 adapter. It's T mount female to M42 male.

Why it's called "TA1" or "TA-1", I have no clue.


Reply

Apologies for bumping this rather old post, but I still felt compelled to answer the inquiry.

"TA#" was the T-mount manufacturer's (Taisei Kogaku, now known as Tamron) way of creating a cataloging standard (applying a "numerical code" or "index") to identify their T-mount-to-camera body adapter fitting.

I imagine that this also permitted for more efficient production orders / bulk manufacturing, to have a numerical code associated with each type of T-mount fitting. The "TA" part of the code very likely stood for "Taisei Adapter", followed by the associated numerical component to indicate the specified fitting for the dedicated camera body.

Here are the cataloging/indexing codes for all T-mount adapters (below). Some remain blank and left with a "?" next to them, because I lack additional information at the moment, but it would be nice if all the members of this forum pooled their knowledge resources together to establish a completed list for the benefit of the rest of the photography world. Wink

TA-1 = For M42 screwmount camera bodies. (Praktica, Zenit, early Asahi/Pentax and Fujica bodies, etc.)

TA-2 = For Exa/Exakta camera bodies (including select Topcon and Praktica models which used the same mount).

TA-3 = For Nikon F/AI cameras bodies.

TA-4 = For Canon FL/FD camera bodies.

TA-5 = For Minolta SR (MC/MD) camera bodies.

TA-6 = For Miranda (M44 screwmount) camera bodies.

TA-7 = For Konica AR camera bodies.

TA-8 = For Konica F camera bodies (an older mount which came before the AR-mount bodies). Not to be confused with the Nikon F mount.

TA-9 = ?

TA-10 = ?

TA-11 = For M39 (LTM/Leica) screwmount camera bodies. (Leica, FED, Zenit, etc.)

TA-12 = ?

TA-13 = For Alpa camera bodies. Not to be confused with the Sony Alpha/Minolta-Maxxum/A-mount camera bodies.

TA-14 = ?

TA-15 = ?

TA-16 = ?

(Note: My decision to stop this list at "TA-16" is arbitrary, and by no means an indication that only 16 types of T adapters were made. Alas, I believe that the numerical code goes on, quite a bit. But I do not know where it stops.)


Reply

Interestingly, Vivitar seemed to use the same numbering system for tele converters and extension tubes.

So, the 2X-1 is a converter for M42 screw, 3X-4 a more powerful one for Canon FL/FD, and AT-5 is a set of extension tubes for Minolta SR/MC, etc. Some higher numbers were used for newer mounts, with -21 for Olympus OM, -22 for Pentax K and -24 for Contax/Yashica AE.

I don't know if the same numbers were used for T-Mounts, but I wouldn't be surprised.