 Verfasst am: So März 24, 2013 2:34 pm Titel: Mottled front element - Braun Katagon 50 2.8 - Staeble Werk |
|
 Verfasst am: So März 24, 2013 2:34 pm Titel: Mottled front element - Braun Katagon 50 2.8 - Staeble Werk |
|
|
Braddanman wrote:
Here is a Braun Paxette bought yesterday at auction including the above lens.
I CLA'd the lens this morning but I cant rid it of the mottling on the outside of the front element.
I've used cold cream, lighter fluid etc but to no avail.
Is this coating damage?
The quality of this lens isn't that great and I'm not sure that cleaning this further will make that much of a difference. However if it will can somebody recommend something that I could polish the element with to to remove the coating entirely.
Included was the Roeschlein Kreuznach 135 5.6 in excellent condition. Just a bit stiff to focus so only need to relube the helicoid.
Min focus of the 50mm is just under a metre. Using a 39/42 ring and an M42 adapter this is reduced to about 70cm due to the longer registration of the adapter, infinity with the adapter is only about a couple of metres. As this is the cheapest M42 adapter and it doesn't have a face plate I'll have somebody turn the adapter to 44mm in length so I can use them both properly.
[url]
[/url] |