| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
spoilerhead
 Anmeldungsdatum: 25.01.2012 Beiträge: 68 Wohnort: ITaly
|
 Verfasst am: Do März 21, 2013 6:08 pm Titel: Anybody uses a Durst 605BW / 670BW? / Modular 70 BW for 6x6? |
|
 Verfasst am: Do März 21, 2013 6:08 pm Titel: Anybody uses a Durst 605BW / 670BW? / Modular 70 BW for 6x6? |
|
|
spoilerhead wrote:
Hey there,
is anyody using a 605/670/m70 condensor enlarger for 6x6?
I got a problem with my 670 bw when enlarging 6x6:
this is a 40-50% crop from print, upper right corner, left normal, right with increased contrast.
There a brighter spot in the corner, caused by the numbers printed onto the Ilford Multigrade filters. they become more apparent when going to larger magnification ratios and/or stopping down the lens. (at about 40x40 cm and f/22 i can clearly read the number). Focus is exactly on the Film plane.
Rotation the filter by 90° just changes the corner the number appears in.
So I wonder, if I'm doing anything wrong, or is my enlarger needs adjustment, or maybe it's the lens' fault? (Rodagon 80/5.6 zebra)
If someone of you got a Durst 605/670/m70 condensor head (I think they all use the same Siriocon 80 for 6x6) could you please check if this happens to you, too?
thanks _________________ Eos (A/D) + M42 |
|
| Nach oben |
|
 |
berraneck
 Anmeldungsdatum: 24.05.2009 Beiträge: 972 Wohnort: prague, czech republic
|
 Verfasst am: Do März 21, 2013 6:13 pm Titel: |
|
 Verfasst am: Do März 21, 2013 6:13 pm Titel: |
|
|
berraneck wrote:
I don´t have this particular enlarger, but I would check proper size and positioning of filters. This is not a normal behaviour. _________________ equipment doesn´t count, good photographs do |
|
| Nach oben |
|
 |
spoilerhead
 Anmeldungsdatum: 25.01.2012 Beiträge: 68 Wohnort: ITaly
|
 Verfasst am: Do März 21, 2013 6:17 pm Titel: |
|
 Verfasst am: Do März 21, 2013 6:17 pm Titel: |
|
|
spoilerhead wrote:
| berraneck hat folgendes geschrieben:: |
| I don´t have this particular enlarger, but I would check proper size and positioning of filters. This is not a normal behaviour. |
The filter size matches the filter drawer perfectly, with about 1mm in each direction spare. I can ease the problem slightly by pulling the filter drawer out about 1mm, if it's more i start to see the borders of the filter drawer in the image. Still, this is the intended position for the filters, and no matter how i rotate them, i will always get a light corner. _________________ Eos (A/D) + M42 |
|
| Nach oben |
|
 |
berraneck
 Anmeldungsdatum: 24.05.2009 Beiträge: 972 Wohnort: prague, czech republic
|
 Verfasst am: Do März 21, 2013 9:50 pm Titel: |
|
 Verfasst am: Do März 21, 2013 9:50 pm Titel: |
|
|
berraneck wrote:
okay, maybe missing condenser lens? I must admit that my knowledge ends here, as I haven´t experienced such a problem :/
maybe folks on APUG could help you  _________________ equipment doesn´t count, good photographs do |
|
| Nach oben |
|
 |
Xpres
 Anmeldungsdatum: 11.12.2007 Beiträge: 964 Wohnort: UK
Expire: 2014-10-28
|
 Verfasst am: Do März 21, 2013 11:41 pm Titel: |
|
 Verfasst am: Do März 21, 2013 11:41 pm Titel: |
|
|
Xpres wrote:
You might try adjusting the lamp up and down so it is properly centered. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| Nach oben |
|
 |
spoilerhead
 Anmeldungsdatum: 25.01.2012 Beiträge: 68 Wohnort: ITaly
|
 Verfasst am: Fr März 22, 2013 10:25 am Titel: |
|
 Verfasst am: Fr März 22, 2013 10:25 am Titel: |
|
|
spoilerhead wrote:
an apug member confirmed the same behavior on a m605. I guess i have to buy a new set of filters and cut them so there won't be any numbers left. The previous owner only used the enlarger for 135, so we probably didn't give a thought about the numbers when cutting the filters to size.
Oh well, at least there's nothing broken
thanks guys. _________________ Eos (A/D) + M42 |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Fr März 22, 2013 11:16 am Titel: |
|
 Verfasst am: Fr März 22, 2013 11:16 am Titel: |
|
|
Orio wrote:
I have an M605, I bought Ilford filters that are larger than 6x6, and cut them with scissors, leaving out the white numbers.  _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|