MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

5D mark III and chipped adapters problem.
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I just got my very first FF camera, Canon 5D mark III, and was eager to try first some of my finest MF lenses.
I have 3 chipped adapter for M42 and 1 chipped adapter for C/Y. They work fine with my APSC Canon 450D. Sadly, on my 5D, 2 out 3 M42 adapters are giving a camera error "Err 01, clean your contacts..." and with my C/Y adapter the camera is switching to "lens firmware update mode", not allowing me to take a single picture. Annoying to say the least.

Has any of you had to deal with these problems ? Is there a solution (except waiting for a camera firmware update) or do I (just) need to find 5D markIII compatible adapters ?


Reply

Salut!
Last time I encountered the Err 01-problem, I made it go away in this way:
a) turn off the camera.
b) take out the battery.
c) put program selector in M-mode.
d) insert battery.
e) turn on camera.
Will this work for you?


Reply

Nope, not working. In your case, was this about regular EF lens or an adapter lens ?
Thanks nonetheless!


Reply

Sorry it did not work for you.
My experience above was with an MF lens (a Helios 44M-4)
and a chipped adapter.

Personally, I prefer non-chipped adapters, but that probably
is a topic for another thread.


Reply

Even though the viewfinder is nice in terms of size, for the moment I can't help but ask for a computer confirmation of a correct focus. Too scared to screw up a shot because I thought the focus was OK but actually wasn't.


Reply

dok hat folgendes geschrieben::
Even though the viewfinder is nice in terms of size, for the moment I can't help but ask for a computer confirmation of a correct focus. Too scared to screw up a shot because I thought the focus was OK but actually wasn't.


Well, i wouldn't rely too much on focus confirm: in my experience with various cameras (not 5dIII, though) it is far from absolutely accurate, especially at wider apertures


Reply

All the camera with DIGIT5 process seems have problem with old chip. Ask the seller for the support of the new camera before you bought it.


Reply

calvin83 hat folgendes geschrieben::
All the camera with DIGIT5 process seems have problem with old chip. Ask the seller for the support of the new camera before you bought it.

That's exactly what I'm doing right now on my way to a new C/Y adapter. I bought the previous one when I only had my 450D.


Reply

Aanything hat folgendes geschrieben::


Well, i wouldn't rely too much on focus confirm: in my experience with various cameras (not 5dIII, though) it is far from absolutely accurate, especially at wider apertures

Well I used a lot the central focus point of my 450D and found it to be pretty accurate, actually. I think that when it didn't work out it was more because of the focus and recompose process (leading to loosing the exact focus point) than an unreliable focus confirmation.

Moreover until now many people are praising the MF possibilities of the 5DIII (via focus confirmation obviously because there's no real interchangeable screens).


Reply

Just in case, there's a similar thread on fred miranda's forum : http://www.fredmiranda.com/forum/topic/1162911


Reply

I'm having the same issue with the T4i. I'm thinking it's the newer models. I posted a topic on here but didn't get much feedback.


Reply

calvin83 hat folgendes geschrieben::
All the camera with DIGIT5 process seems have problem with old chip. Ask the seller for the support of the new camera before you bought it.


+1

The same i experienced after upgrading from old 5D to 5D MKII.. none of my old adaptors with chip did work on 5D MKII.. !
After buying new ones from seller everything was fine..



Cheers
Henry


Reply

Guys,

Apparently adapters for 5D mark iii seem to appear.
here's one for C/Y contax yashica : http://cgi.ebay.fr/3nd-AF-Confirm-Contax-Yashica-CY-Lens-to-Canon-EOS-Adapter-For-5D-mark-III-650D-/370713596463?pt=US_Lens_Adapters_Mounts_Tubes&hash=item565040922f


EDIT : There's more !
http://stores.ebay.fr/camplus-shop/3rd-AF-Confirm-Adapter-/_i.html?LH_TitleDesc=1&_nkw=5D+mark+III&_fsub=575551419&_sid=654376679&_trksid=p4634.c0.m322
(I have no interest in this seller, it's just the only one I found).


Reply

Hi,

Can you confirm if the chipped adaptors for the mark3 light up the individual focus points as you scan focus through them?

Does that make sense? I tried a friend's 7D and the points lit up indivdually so allowing me to compuse first, focus with the point at the right area I wanted to focus on and then take the shot without moving too much.

Thanks
Ravi
============

PS - I think I found the answer.

Selecting 61 Point Automatic Selection AF activates all points simultaneously and any that are in focus will light up.