MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Blackening aluminum (aluminium)
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

What are you doing about mild "brassing". I brought in a MF lens yesterday that is not too bad, but it needs a bit of touch-up around the front where a very narrow band of black anodizing is worn off and the color is showing "silver", which is really just aluminum.

Has anyone found an easy way, or at least a straightforward way, to re-blacken such a piece? Re-anodizing is not especially practical at this point because of the need for disassembly . . . . and besides it's a very small part.

Is anyone doing anodizing at home?

If not, how do you deal with "brassing"? Question


Reply

guardian hat folgendes geschrieben::
If not, how do you deal with "brassing"? Question


I don't. I think it's good that lenses show they've seen use, that way I won't be mistaken for a shelf collector when I'm out photographing with it Razz Twisted Evil

Vilhelm


Reply

For small scratches, I use just black permanent maker. It gives good results. The thin layer over the scratches avoids the paint to conrtnue peeling off, and tha black colour gets similar to the original giving a better look.


Reply

I suspect I'm in the minority here, but as long as the Optics and Mechanics of the lens are fine, then I don't care at all how it looks. I'd rather have a cheaper but tatty looking lens than a pristine version. If it's good, chances are it will end up underground, and it most certainly won't be pristine after that!

Oh, ok then, maybe just a little... "almost dead" is my preferred look because it annoys the hell out of people who like to polish lenses, but don't use them, and partly because it show that either myself, or the previous owner just couldn't take it off the pointy side of the camera.


Reply

NewStuff hat folgendes geschrieben::
I suspect I'm in the minority here, but as long as the Optics and Mechanics of the lens are fine, then I don't care at all how it looks. I'd rather have a cheaper but tatty looking lens than a pristine version. If it's good, chances are it will end up underground, and it most certainly won't be pristine after that!

Oh, ok then, maybe just a little... "almost dead" is my preferred look because it annoys the hell out of people who like to polish lenses, but don't use them, and partly because it show that either myself, or the previous owner just couldn't take it off the pointy side of the camera.

+1

I distrust a lens in pristine condition. It means it hasn't been used very much, which raises doubts that it is OK. I've had a few mint lenses that weren't.


Reply

Jesito hat folgendes geschrieben::
For small scratches, I use just black permanent maker. It gives good results. The thin layer over the scratches avoids the paint to conrtnue peeling off, and tha black colour gets similar to the original giving a better look.


Appreciate the suggestion. Thank you. Your's is also most likely a safe approach. I posted here, on this repair board, with the hope of receiving helpful suggestions and ideas, like yours, to address the problem I'm facing.

My issue is more "brassing", though, than scratches. Still, a permanent marker might work. A bit of experimentation is probably in order to determine the best type.

I have looked at the home anodizing process. Seems to me, though, it would be rather like using a shotgun to kill a mouse. This is to say nothing of the lens disassembly required and the stripping dangers regarding dimensions.


Reply

Home anodizing is fairly easy, and it's not that hard to get hold of the equipment, but it does consume a fair amount of electricity. You would need to strip the lens back to bare metal first, all paint should be removed, so aperture and focus marking etc would be lost.


Reply

Home anodizing - whow, sounds great. But the price for chemicals and equipment and power would be too much for me. I better buy a small mill Smile

NewStuff hat folgendes geschrieben::
I suspect I'm in the minority here, but as long as the Optics and Mechanics of the lens are fine, then I don't care at all how it looks. I'd rather have a cheaper but tatty looking lens than a pristine version. ...


You are not alone Smile
I even like to buy lenses with fungus, to try to clean it away. Or with mechanical defects which I probably able to repair.


Reply

Also an alternative is to use enamel paint, a bit thinned with solvent, like Humbrol or Tamiya.
In some cases I've been able to paint parts of a camera body with an aerograph and that kind of enamel. But it needs also some disassembly.


Reply

I use Tamiya acrylic, which is water and solvent soluble. The 'Semi Gloss Black X-18' is a good match for most cameras. It dries very quickly as well. I use it unthinned, and when it is touch dry I rub the new paint gently with my finger and that smooths any brush marks, blends the new paint to the old, and flattens the finish a bit - if it needs it. On scratched camera backs, along the hinge, etc, I have done invisible small repairs.
It comes in small 10ml bottles form model suppliers, the acrylic thinner is product number X-20A.


Reply

Lloydy hat folgendes geschrieben::
I use Tamiya acrylic, which is water and solvent soluble. The 'Semi Gloss Black X-18' is a good match for most cameras. It dries very quickly as well. I use it unthinned, and when it is touch dry I rub the new paint gently with my finger and that smooths any brush marks, blends the new paint to the old, and flattens the finish a bit - if it needs it. On scratched camera backs, along the hinge, etc, I have done invisible small repairs.
It comes in small 10ml bottles form model suppliers, the acrylic thinner is product number X-20A.


Thanks for the excellent tip.

It's interesting you choose to use semi-gloss. I'm not sure I would have thought of that. But I should have! Smile