MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Built-in flash and a fisheye/UWA lens
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I tried using the built-in flash of my D90 with a fisheye lens attached. No success.

The manual says the built-in flash is suitable for 18-300mm lenses. Does this mean it never works with manual lenses under 18mm?
Will an external flash work with those?


Reply

Mind explain a bit what you mean by "no success"?

Is it because the built-in flash is partly blocked by the lens? The flash should still fire.

Even external flash will not cover the full width of ultra wide lens. The one I have will go only until 20/21mm. I can still use the flash, let say with a 17mm lens just that those area not cover by the flash (wider than 20/21mm) will be darker.


Zuletzt bearbeitet von my_photography am Mi Okt 17, 2012 9:14 am, insgesamt ein Mal bearbeitet


Reply

You still can use the build-in flash with a shiny object to reflect the flash to the ceiling/bouncing. I had to improvise once by using a spon, but the light is weak.


Reply

Hi Lena!
Yes, I see what you mean. A few months ago I made an invention
which made it possible for me to "steer" the flash from a compact
so that the light would fall in front of the lens...
I made a PDF of how I did it, will dig it up and e-mail it to you.


Reply

Lena hat folgendes geschrieben::
The manual says the built-in flash is suitable for 18-300mm lenses.


The manual quotes these figures for a CPU lens. Is your lens "chipped" ? What is your Flash setting ? Manual or TTL ? Did your flash fire ?

Even if you get the flash to fire the angle of coverage may be less than that needed to illuminate the frame covered by your fisheye.


Reply

The lens is not chipped. I used manual settings for both the camera and the built-in flash and it didn't fire at all.
The sign of the flash was blinking though. Provided the battery was fully charged, I see no "equipment related" reason why the flash wouldn't fire.
The error message I got is said to refer to external flash, but I don't own one and never did any settings for external flash. I'm hopeless when it comes to technical things :/


Reply

Really strange. By the way, what camera are you using? Perhaps someone here will be able to give suggestion on certain settings needed for your camera. Also what mode were you shooting? M, A, S (Tv)?

Zuletzt bearbeitet von my_photography am Do Okt 18, 2012 3:09 am, insgesamt ein Mal bearbeitet


Reply

I found the guilty one! I left the camera in a service for an hour to have one AF lens checked for AF accuracy and they messed with some of the settings. They switched off the manual mode of flash control and probably that's why it didn't work.
Thanks for the hints, at least I had an idea where to look.