MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

CZ Flektogon 35mm f2.8 Zebra Exacta mount assembly problem!
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi everyone,
i bought a Carl Zeiss Flektogon 35mm f2.8 Zebra Exacta mount and the focus ring was pretty stiff, so i took it apart and put some oil in there. Nor this works fine, but, now i can't put the last part back! that button worked, and there must me a special way it gets in, i didn't pay attention when unscrewing it. Had any one such repairs done? I mean only in Exacta mount, because a Flektogon 20mm f4 in m42 mount was piece of cake!! please help!


Reply

Buga hat folgendes geschrieben::
Hi everyone,
i bought a Carl Zeiss Flektogon 35mm f2.8 Zebra Exacta mount and the focus ring was pretty stiff, so i took it apart and put some oil in there. Nor this works fine, but, now i can't put the last part back! that button worked, and there must me a special way it gets in, i didn't pay attention when unscrewing it. Had any one such repairs done? I mean only in Exacta mount, because a Flektogon 20mm f4 in m42 mount was piece of cake!! please help!


Reply

Your picture didn't showed because of it being your first post, (anti spam)

Not sure about what you mean by adding oil? if you put oil on the focusing helicoid you will have big problems later on the aperture blades, I hope you only put grease.

About the mount part, you need to keep that button pressed while you put it back with the rest of the lens. Hope this helps.