MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

maybe (probably) a stupid question....DOF
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

i have started using old mf lenses on my d70. despite being a semi pro landscaper photographer with knowledge of how to set up and use my camera manually, i have little experience with actaul workings of manual lenses.

anyways my carl zeiss 50mm 2.8 has a button on the side which i take to be the DOF preview button, at least this is the effect it has. thing is though, that i have to have it pressed down whilst taking a shot for the aperture to be anything but 2.8

so if i want anything from 5.6 upwards (numbers wise) then i have to not only press the dof button to preview the aperture (which i know you have to do anyways) but also hold it down to take the shot at that aperture

so my question is, is this a normal function or is something wrong (with either me or the lens Razz )
thanks
rich


Reply

I think you have a preset diaphragm on that lens.


Reply

That button probably activates a mechanism that the film cameras this lenses were intended for activates by herself when shooting.

I'll try to explain myself better: for that cameras, the lenses were used wide open to get maximum viewfinder brightness and focus accuracy, so, when composing (i.e. before releasing the shutter), the lens stays wide open. You have a DOF preview button to see what the actual DOF will look like in your shot at the aperture you chose, so pressing it temporarily stops the lens down at the aperture you chose on the aperture ring.
But, when you fire the shutter in, the old camera activates a mechanism that acts just like the DOF button, and stops the lens down to that aperture value for the shutter time (in my m42 lenses this is activated by pressing a small pin on the back of the lens barrel).
Your dslr won't activate this mechanism, this is the reason why you don't see the aperture changing when your DOF preview button is not pressed.

The possible solutions are:
1- your lens has an auto/man switch, in this case you just have to set the lens to manual, and you just set the aperture with the ring.
2- your lens has no auto/man switch, so you have to find a way to keep the mechanism triggered.

What lens is it, exactly, in what mount?


Reply

thank you both for replying
the lens in a carl zeiss 50mm 2.8 tessar (the zebra striped one)
the lens has no A/M button on it so i guess that leaves holding down somehow...any ideas?

i dont mind for handheld but for tripod macro work its obviously impossbile to do things like self timer and hold it down at the same time and get clear shots
thanks


Reply

it is in m42 screwmount?
there are adapters with a flange that keep the metal pin pressed, so your lens will work in "manual" mode.
With many lenses it's quite easy to access the pin mechanism disassembling the mount part of the lens, and jamming the pin with something, and this modification is easily reversable.

I never had a Tessar, and my zebra pancolar has an auto/man switch, so I can't be more specific on this.


Reply

sorry im not sure what that means....it is being used with a m42 to nikon af adapter.
i can see the pin on the back that moves with the black switch. i shall have a deeper look. it actually looks like i may be even able to jut wedge a small piece of paper behind the switch to hold it in place
thanks
rich


Reply

ive placed a small amount of bluetack behind the black switch, and bit rough and ready but it seems to be doing the job


Reply

richsabre hat folgendes geschrieben::
sorry im not sure what that means....it is being used with a m42 to nikon af adapter.
i can see the pin on the back that moves with the black switch. i shall have a deeper look. it actually looks like i may be even able to jut wedge a small piece of paper behind the switch to hold it in place
thanks
rich


That's the idea, you must find a way to keep that pin pressed. Usually, disassembling the lens' back, you can jam that pin from the inside.
I don't know how nikon adapters are made, but for m42 to minota AF there are some that are made to keep that pin pressed. They don't work with all lenses, though.


Reply

ok, ill check into that, thanks for your help:)
rich


Reply

If the pin is never going to come out again, I use a dab of epoxy glue. It's better than superglue, that creeps down the pin, epoxy just makes a blob over the pin ( hold it down with a pin as the epoxy sets ) that can be scraped off with a craft knife if you do decide to releese the pin.