| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Srdjan
 Anmeldungsdatum: 11.04.2012 Beiträge: 316 Wohnort: Nis
|
 Verfasst am: Do März 27, 2014 8:44 am Titel: !Help! lens glass stuck |
|
 Verfasst am: Do März 27, 2014 8:44 am Titel: !Help! lens glass stuck |
|
|
Srdjan wrote:
Anyone have any idea please i will appreciate. I started to clean one of my Carl Zeiss lens. There is a dust in rear lens group. I take of metal ring that holds rear glass but there is no way glass came out.
Usually I have just to turn over the lens and hit couple of times but, this glass dot't go out this time.
Next stage I took vacuum toy (that goes on glass) use it ti try to take of lens but nothing. Actually lens moves maybe couple of microns and then nothing. I know it moved because it clicks when I pees it (but only microns).
Is there some way to take it out, please help!!!!!!!!!!!!!! _________________ Perfection is just another type of anomaly |
|
| Nach oben |
|
 |
Lloydy
 Anmeldungsdatum: 02.09.2009 Beiträge: 7880 Wohnort: Ironbridge. UK.
Expire: 2022-01-01
|
 Verfasst am: Do März 27, 2014 9:18 am Titel: |
|
 Verfasst am: Do März 27, 2014 9:18 am Titel: |
|
|
Lloydy wrote:
I cleaned an old Tessar yesterday and the rear glass is very thick and small in diameter, and it would not come out of the body, although like yours, it was moving slightly. In the end I had to open the aperture and push the glass out with my finger, and it slid out very easily. Being thick the lens had to be dead straight to remove, and replace. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Nach oben |
|
 |
Srdjan
 Anmeldungsdatum: 11.04.2012 Beiträge: 316 Wohnort: Nis
|
 Verfasst am: Do März 27, 2014 10:06 am Titel: |
|
 Verfasst am: Do März 27, 2014 10:06 am Titel: |
|
|
Srdjan wrote:
Jes thats a good way but I m cleaning flektogon and the rear group have 3 glasses so there is no way to push it from other side. There is only one way they coming out. _________________ Perfection is just another type of anomaly |
|
| Nach oben |
|
 |
themoleman342
 Anmeldungsdatum: 21.10.2007 Beiträge: 2190 Wohnort: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Verfasst am: Do März 27, 2014 12:01 pm Titel: |
|
 Verfasst am: Do März 27, 2014 12:01 pm Titel: |
|
|
themoleman342 wrote:
Putting a tiny tiny bit of fluid around the element will reduce the friction and allow it to slide out. Just a drip of distilled water usually works. |
|
| Nach oben |
|
 |
Layer-cake
 Anmeldungsdatum: 18.03.2013 Beiträge: 560 Wohnort: Cape Town
|
 Verfasst am: Do März 27, 2014 2:29 pm Titel: |
|
 Verfasst am: Do März 27, 2014 2:29 pm Titel: |
|
|
Layer-cake wrote:
agreed with themoleman342, you could also use heat to expand the outer ring a bit and it might come out like that |
|
| Nach oben |
|
 |
RSalles
 Anmeldungsdatum: 12.08.2012 Beiträge: 1372 Wohnort: Brazil - RS / South
|
 Verfasst am: Do März 27, 2014 2:35 pm Titel: |
|
 Verfasst am: Do März 27, 2014 2:35 pm Titel: |
|
|
RSalles wrote:
... or use both: heath the metal with a hair dryer - for instance - and put a tiny drop of fluid around the lens element then tap gently,
Renato |
|
| Nach oben |
|
 |
themoleman342
 Anmeldungsdatum: 21.10.2007 Beiträge: 2190 Wohnort: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Verfasst am: Do März 27, 2014 3:24 pm Titel: |
|
 Verfasst am: Do März 27, 2014 3:24 pm Titel: |
|
|
themoleman342 wrote:
That's a lot of heat to put to the glass. I personally would not recommend that. I also don't fully understand it. Even if you could heat it enough where the metal would expand, wouldn't doing that actually pinch the glass tighter? |
|
| Nach oben |
|
 |
Layer-cake
 Anmeldungsdatum: 18.03.2013 Beiträge: 560 Wohnort: Cape Town
|
 Verfasst am: Do März 27, 2014 3:37 pm Titel: |
|
 Verfasst am: Do März 27, 2014 3:37 pm Titel: |
|
|
Layer-cake wrote:
generaly if you cool the whole item first and then heat the outer ring you can create enough space to allow for some movement, bear in mind when you heat a ring even though it is expanding in all directions the particles next to each other in the ring formation expand on each other, creating a gap. |
|
| Nach oben |
|
 |
RSalles
 Anmeldungsdatum: 12.08.2012 Beiträge: 1372 Wohnort: Brazil - RS / South
|
 Verfasst am: Do März 27, 2014 4:08 pm Titel: |
|
 Verfasst am: Do März 27, 2014 4:08 pm Titel: |
|
|
RSalles wrote:
| themoleman342 hat folgendes geschrieben:: |
| That's a lot of heat to put to the glass. I personally would not recommend that. I also don't fully understand it. Even if you could heat it enough where the metal would expand, wouldn't doing that actually pinch the glass tighter? |
Last time I found a lens element stuck was in a Summicron-R 2/50. I had finally removed it heating slowly and gently, adding half drop of lighter fluid around its border and a teeth wood stick gently pulling around the glass borders.
If the glass expands by heat and cool down too fast it cracks, no doubt. But we're talking about some degrees above ambient temp. not melting heat,
[]s,
Renato |
|
| Nach oben |
|
 |
SXR_Mark
 Anmeldungsdatum: 12.06.2010 Beiträge: 506 Wohnort: England
|
 Verfasst am: Do März 27, 2014 10:37 pm Titel: |
|
 Verfasst am: Do März 27, 2014 10:37 pm Titel: |
|
|
SXR_Mark wrote:
I always use isopropyl alcohol for shifting anything stuck on a lens. It is a great lubricant, has just the right volatility so it hangs around long enough but eventually evaporates cleanly and is gentle so it won't attack paint and plastic. I also use it as a cutting fluid on the lathe and for tapping, drilling etc. A real wonder fluid in my opinion. A few drops on the lens edge should help free it.
Mark _________________ Olympus OM-D E-M1 for everything |
|
| Nach oben |
|
 |
Srdjan
 Anmeldungsdatum: 11.04.2012 Beiträge: 316 Wohnort: Nis
|
 Verfasst am: Mo März 31, 2014 6:58 am Titel: |
|
 Verfasst am: Mo März 31, 2014 6:58 am Titel: |
|
|
Srdjan wrote:
Thank you friends for advises. I finally menage to take it out. I didn't wanted to use heat and I was afraid of using lighter fluid because glass was coted (I didn't wont some chemical reaction).
In the end i used the same oil that I use for lubricating lens (synthetic oil) and put just on the border. I wait 5 min and then I start to move back and forth until oil got inside and then glass went out easy. Later i have to clean glass of oil, but the most important it get out. _________________ Perfection is just another type of anomaly |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|