MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Is fixer getting rare? [was: 400 135 film]
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

[Is 400 135 film really getting rare?
Can't really see many entries on *bay.]


Zuletzt bearbeitet von kansalliskala am Mi Mai 16, 2012 10:08 am, insgesamt ein Mal bearbeitet


Reply

colour or BW? I don´t watch at ebay, but there are plenty of fresh and old stocks in my country.. is it so bad in finland?


Reply

Sorry,

Black & White

I'm looking cheaper alternatives than Ilford 7€ / roll.


Reply

If you don´t mind Kodak Tri-x (as it has bit different tonality than HP5+), you can buy it rebadged as Arista Premium from Freestylephoto

http://freestylephoto.biz/192364-Arista-Premium-BandW-400-ISO-35mm-x-36-exp.

so far I know, it´s the cheapest new-stock solution. They also have some nice prices on other films - just search their eshop. Funny is that price including shipping, import duties and taxes in EU... wait for it... is cheaper or the same as UK suppliers.

edit: and if you don´t have problem with bulk loading, try to search for cine Kodak Double-X. It is ussualy provided in 400ft rolls, but it has really great tonality (do you know movie Control from Anton Corbijn? it was shoot on this and Plus-X) so it is worth some uncomfortable handling.


Reply

Thank you, interesting site, Holgas and Leicas. But really good prices.

I thought that Tri-X needs its own development chemicals but it doesn't?


Reply

Tri-X is the universal B&W film the way D-76 is the universal developer - you should be able to find dev times for just about any developer you have in mind for Tri-X

The damn stuff has one foible: it curls like hell, in both directions.


Reply

Nesster hat folgendes geschrieben::
The damn stuff has one foible: it curls like hell, in both directions.


Agfa APX too. I dried it in our greenhouse (most dust-free place in our home because of the dogs), we watched it to climb upwards like a snake. Smile


Reply

kansalliskala hat folgendes geschrieben::
Nesster hat folgendes geschrieben::
The damn stuff has one foible: it curls like hell, in both directions.


Agfa APX too. I dried it in our greenhouse (most dust-free place in our home because of the dogs), we watched it to climb upwards like a snake. Smile


Use pegs at both ends



Reply

400 ISO film has never been cheap even in the "good old times", but 7 Euros is insane price!
Buy from my friend Dario at Westernphoto, he has very good prices:
http://www.westernphoto.it/sell-online/Ilford-9


Reply

Orio hat folgendes geschrieben::
Use pegs at both ends


Tried that, the damn thing curves around the axis and it's impossible to get into scanner. If you let it roll other way it is slightly easier to handle.


Reply

Orio hat folgendes geschrieben::
400 ISO film has never been cheap even in the "good old times", but 7 Euros is insane price!
Buy from my friend Dario at Westernphoto, he has very good prices:
http://www.westernphoto.it/sell-online/Ilford-9


Thanks, 4,72 sounds much more acceptable.

This is my standard shop, and I still have to drive there or send my brother-in-law to get the stuff.

http://tinyurl.com/dy9a4hw


Reply

7dayshop.com have always been good to deal with, their delivery is quick and relable.

http://www.7dayshop.com/catalog/default.php?cPath=777

I don't know how their prices compare to yours in Euro's, but it's worth a look.


Reply

Orio hat folgendes geschrieben::
400 ISO film has never been cheap even in the "good old times", but 7 Euros is insane price!
Buy from my friend Dario at Westernphoto, he has very good prices:
http://www.westernphoto.it/sell-online/Ilford-9


There is ISO400 bulk film from FOMA 42 EUR enough for 24 pcs 24 frames roll. Less than 2 EUR /roll


Reply

kansalliskala hat folgendes geschrieben::
Orio hat folgendes geschrieben::
Use pegs at both ends


Tried that, the damn thing curves around the axis and it's impossible to get into scanner. If you let it roll other way it is slightly easier to handle.
I use Patterson clips and I've never had an issue with Tri-X.


Reply

martinsmith99 hat folgendes geschrieben::
I use Patterson clips and I've never had an issue with Tri-X.


Do you cut the negatives before drying?


Reply

kansalliskala hat folgendes geschrieben::
Sorry,

Black & White

I'm looking cheaper alternatives than Ilford 7€ / roll.



7€ sounds a bit steep. I buy most of my films at an online-shop here in Germany (www.macodirect.de). They have plenty of different brands and of course some choices for iso 400. Cheapest would be the Rollei Retro 400 for less than 3€ if you buy a 20pieces pack. I think Fomapan 400 is also quite cheap and Ilford HP5 costs less than 5EUR.


Reply

kansalliskala hat folgendes geschrieben::
martinsmith99 hat folgendes geschrieben::
I use Patterson clips and I've never had an issue with Tri-X.


Do you cut the negatives before drying?

It´s not needed to cut it before drying - if you put these quite heavy clips on the end of film (heavy in comparison with film), it won´t climb up. It turns a bit in one axis, but you may flatten it in negative carriers under books for few days and they get totally flat. Also I wouldn´t cut it before drying, because you can damage the film accidentaly and any manipulation leads to small dust glued into emulsion, which cannot be taken off.


Reply

I use Yashica promotional clothes-pin like plastic clips. One at the bottom, and there's no curling while drying.

However, as soon as I start to cut the film into strips after drying, it's curl time. Putting the film in sleeves and under a weight for some long period helps. I've seen others here say to put the film, rolled up in reverse, in a film canister.

Tri-X is really one of the big offenders in this... once on the scanner, if you've managed to get it reasonably flat longitudinally, there's still a big dishing curl across the film. I've bought some anr glass inserts to deal with this, though haven't used them yet.

I used to avoid Kodak b&w just for this curling reason... but have a large stash of it thanks to daughter's photo class last year.


Reply

Nesster hat folgendes geschrieben::
II've seen others here say to put the film, rolled up in reverse, in a film canister.


I once dried a strip of film in spiral. It didn'r curle axially but left some strange marks on the negative.

like this
http://en.wikipedia.org/wiki/File:Lentille_de_fresnel.jpg


Reply

berraneck hat folgendes geschrieben::
kansalliskala hat folgendes geschrieben::
martinsmith99 hat folgendes geschrieben::
I use Patterson clips and I've never had an issue with Tri-X.


Do you cut the negatives before drying?

It´s not needed to cut it before drying - if you put these quite heavy clips on the end of film (heavy in comparison with film), it won´t climb up. It turns a bit in one axis, but you may flatten it in negative carriers under books for few days and they get totally flat. Also I wouldn´t cut it before drying, because you can damage the film accidentaly and any manipulation leads to small dust glued into emulsion, which cannot be taken off.


+1
allow 24 hrs drying in a dry place hanged with clips at both ends
Never cut the film in the first 24 hrs
After one day, cut the strips and put them between two sheets of parchment paper, then put a heavy book over.
Leave there another 24 hours, then scan, and then put the strips inside proper archival sheets.


Reply

Orio hat folgendes geschrieben::
allow 24 hrs drying in a dry place hanged with clips at both ends
Never cut the film in the first 24 hrs
After one day, cut the strips and put them between two sheets of parchment paper, then put a heavy book over.
Leave there another 24 hours, then scan, and then put the strips inside proper archival sheets.


Ok, thank you.

I understand now one thing. It isn't the water that dries but the film itself. This explains a lot. I been doing the book thing already but with little effect.


Reply

Not many fixers available any more. Tricky to order online.

Fix AG and Ilford Rapid only choices locally?

edit: update: just ordered some from ebay.de


Reply

I make my own fixer from Sodium Thiosulphate crystals, I dissolve 500g in 2l of water, works perfect, I've used it on many films and it lasts for about 20-25 films.



Reply

How much one had to dilute this?

Zitat:
Sodium thiosulfate, solution 0,1 mol/l (0,1 N)


Reply

You can order the excellent Ornano Superfix F 205 directly at the factory, along with the other surviving products of the formerly large line of photo chemicals.
It's an Ammonium Thiosulfate based fixer with very rapid action and long shelf life. You can use it for both film (1+4 dilution) and paper (1+9 dilution)
1 liter of concentrated product costs 9 Euros; they make also bulk offers (10 liters for 50 Euros).
ornano@ornano.it