| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
hoanpham
 Anmeldungsdatum: 31.01.2011 Beiträge: 2575
Expire: 2015-01-18
|
 Verfasst am: Mi Jan 25, 2012 10:53 am Titel: Nex adapters - a short review |
|
 Verfasst am: Mi Jan 25, 2012 10:53 am Titel: Nex adapters - a short review |
|
|
hoanpham wrote:
I have now several Nex adapters and can share some of my experience.
Fotodiox consumer grade adapter(s): PK-NEX, OM-NEX, FD-NEX
Fotodiox pro grade adapter(s): F-NEX
EzFoto tilt adapter(s): F-NEX, PK-NEX
Kipon adapter(s): PK/DA-NEX
Bad thing first. The Kipon PK/DA-NEX is one of the most expensive, fits perfectly, but the lens cannot change the aperture. The lens' aperture must be in A-position, otherwise it cannot mount. Using force will bend the aperture pin. Practically the adapter is useless - the nex body can by no mean adjust the aperture from the body. So I have to return it.
Fotodiox consumer grade adapters have ok build quality. I don't have Rainbow or Studio Cowboy adapters to compare, but Fotodiox costs more, and I think these might have a bit better quality than the cheaper ones. They turn out that two of the adapters are too tight to fit the lens. The mounts need to sand down a bit. Metal edges are very sharp, possible rest metal from a cutting/manufacturer process were left and make it too tight. How tight? tight enough that may destroy a costly lens when you want to remove it.
What I did is to use a JIS screwdriver and remove the metal mount, sand it down gently, and also sand the edges so I don't worry to cut myself. After a few retry, the lenses fit nicely.
The Fotodiox pro adapter has a metal spring on each bayonet flags, similar design as camera mount. This adapter fits perfectly.
The tilt adapters also fit fine. The degree scale is made by a sticker, that felt off easily, which make me think about build quality. They fit the lenses nicely. There are two rotation: complete circle rotation and rotation to adjust the tilt. The circle rotation is a bit hard, but after several turns, it feels correct. The tilt rotation is well damped and usable with heavier lenses, except that when using force to turn, the sticker scale may fall off and leave a hole/slot expose the mechanism.
So what is good about them? The best things for me are (1) to use all my lenses - OM, F, PK, FD, (2) with tilt.
I have both nex5 and nex5n+evf. The nex5n+evf is superior for use with MF lenses compared with the nex5.
I am ok using MF with LCD on both with focus peak on, but nex5n+evf allows me to control the focus without pushing zoom button.
I tested with OM55/1.2, FD 85/1.2, K50/1.2. Using these lenses around MFD is very easy to get correct focus, and the evf is far better than LCD.
Regarding the focus peak when using with tilt adapters,
Nex is far more practical than dslr with split screen. Here I can control the whole frame where is in focus.
Parameters needed for a tilt photo are: tilt direction (circular rotation), tilt angle, camera angle, focus, and aperture.
Reframe a tilt photo on dslr with split screen had always been difficult, but with the nex focus peak, it had become very easy to get it right.
My recommendation?
- if you have different mounts, get the nex5n+evf or nex7. It is worth the upgrade.
- if possible get the pro grade adapters. Currently only 2 types from fotodiox available.
- get the tilt adapter for use with focus peak (nex5, nex5n, nex7, not sure nex3)
Sell your dslr? nop. Keep it. Nex is fragile and wont survive long. _________________ La migliore cura di LBA � imparare una nuova lingua. Le meilleur rem�de de LBA est d'apprendre une nouvelle langue. La mejor cura del LBA es aprender una nueva lengua. |
|
| Nach oben |
|
 |
my_photography
 Anmeldungsdatum: 03.11.2008 Beiträge: 2772 Wohnort: Pearl of the Orient
Expire: 2016-12-25
|
 Verfasst am: Mi Jan 25, 2012 2:39 pm Titel: Re: Nex adapters - a short review |
|
 Verfasst am: Mi Jan 25, 2012 2:39 pm Titel: Re: Nex adapters - a short review |
|
|
my_photography wrote:
Thanks for the info. Most useful for me since I am in the market of looking for Nex adapters.
| hoanpham hat folgendes geschrieben:: |
Sell your dslr? nop. Keep it. Nex is fragile and wont survive long. |
It sure will not survive a dropl.  _________________
Zeiss: CJZ Flektogon 20/2.8, CJZ Flektogon 20/4, , CJZ Pentacon 29/2.8, CJZ Flektogon 35/2.4, CJZ Pancolar 50/1.8, Tessar 50/2.8, Biotar 7.5cm/1.5, CJZ Pancolar 80/1.8, CJZ Sonnar 135/3.5, CJZ Pentacon 135/2.8 CJZ Sonnar 200/2.8
Other Germany: Meyer Primoplan 50/1.8, Meyer Trioplan 100/2.8
Takumar: SMC 50/1.4 Super Tak 55/2, Super Tak 85/1.9, S-M-C 135/3.5, Super Tak 150/4
Russian: Zenith 16/2.8, Mir-24M 2/35, Volna-9 50/2.8, Helios 44M (58/2), Helios 44M-3 MC (58/2), Helios 40 (85/1.5), Tair 11A (135/2.8 )
Others: Sears 28/2.8, Sankor 35/2.8, Enna M�nchen Tele-Ennalyt 135/3.5
Zoom Sigma Zoom 28-85/3.5-4.5
|
|
| Nach oben |
|
 |
Feldin
Anmeldungsdatum: 18.04.2012 Beiträge: 5 Wohnort: Hungary
|
 Verfasst am: Sa Apr 21, 2012 10:04 am Titel: Re: Nex adapters - a short review |
|
 Verfasst am: Sa Apr 21, 2012 10:04 am Titel: Re: Nex adapters - a short review |
|
|
Feldin wrote:
Did you find anything else for pentax DA?
| hoanpham hat folgendes geschrieben:: |
I have now several Nex adapters and can share some of my experience.
Fotodiox consumer grade adapter(s): PK-NEX, OM-NEX, FD-NEX
Fotodiox pro grade adapter(s): F-NEX
EzFoto tilt adapter(s): F-NEX, PK-NEX
Kipon adapter(s): PK/DA-NEX
Bad thing first. The Kipon PK/DA-NEX is one of the most expensive, fits perfectly, but the lens cannot change the aperture. The lens' aperture must be in A-position, otherwise it cannot mount. Using force will bend the aperture pin. Practically the adapter is useless - the nex body can by no mean adjust the aperture from the body. So I have to return it.
Fotodiox consumer grade adapters have ok build quality. I don't have Rainbow or Studio Cowboy adapters to compare, but Fotodiox costs more, and I think these might have a bit better quality than the cheaper ones. They turn out that two of the adapters are too tight to fit the lens. The mounts need to sand down a bit. Metal edges are very sharp, possible rest metal from a cutting/manufacturer process were left and make it too tight. How tight? tight enough that may destroy a costly lens when you want to remove it.
What I did is to use a JIS screwdriver and remove the metal mount, sand it down gently, and also sand the edges so I don't worry to cut myself. After a few retry, the lenses fit nicely.
The Fotodiox pro adapter has a metal spring on each bayonet flags, similar design as camera mount. This adapter fits perfectly.
The tilt adapters also fit fine. The degree scale is made by a sticker, that felt off easily, which make me think about build quality. They fit the lenses nicely. There are two rotation: complete circle rotation and rotation to adjust the tilt. The circle rotation is a bit hard, but after several turns, it feels correct. The tilt rotation is well damped and usable with heavier lenses, except that when using force to turn, the sticker scale may fall off and leave a hole/slot expose the mechanism.
So what is good about them? The best things for me are (1) to use all my lenses - OM, F, PK, FD, (2) with tilt.
I have both nex5 and nex5n+evf. The nex5n+evf is superior for use with MF lenses compared with the nex5.
I am ok using MF with LCD on both with focus peak on, but nex5n+evf allows me to control the focus without pushing zoom button.
I tested with OM55/1.2, FD 85/1.2, K50/1.2. Using these lenses around MFD is very easy to get correct focus, and the evf is far better than LCD.
Regarding the focus peak when using with tilt adapters,
Nex is far more practical than dslr with split screen. Here I can control the whole frame where is in focus.
Parameters needed for a tilt photo are: tilt direction (circular rotation), tilt angle, camera angle, focus, and aperture.
Reframe a tilt photo on dslr with split screen had always been difficult, but with the nex focus peak, it had become very easy to get it right.
My recommendation?
- if you have different mounts, get the nex5n+evf or nex7. It is worth the upgrade.
- if possible get the pro grade adapters. Currently only 2 types from fotodiox available.
- get the tilt adapter for use with focus peak (nex5, nex5n, nex7, not sure nex3)
Sell your dslr? nop. Keep it. Nex is fragile and wont survive long. |
_________________ NEX-3
Sony SEL 18-55mm F3,5-5,6
CZJ sonnar 135mm 3,5
Helios 44M-4 58mm F2
Pentacon 200mm F4 |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|