MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Longtime exposures with B/W film?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi
I'm currently planning an urban exploration shooting of an nearby very old and scary long time abandoned hospital complex and maybe the extensive catacombs beneath it (if they are not all under water).

I like to use B/W film (Superpan 200 and APX100) for most of my shots to produce a retro look.
I'm planning to shot most with availbable light at night and I'm sure exposure times of at least 10-30s will be necessary.

But as far as I know analog film has a genaeral problem with very long exposure times or that only an issue with multi-layered emulsions?

Is there some kind of formula how to determine the correct ISO for long time exposures?
Or has anyone a recommendation which ISO I should try?

Thx for all constructive input!


Zuletzt bearbeitet von ForenSeil am Mo März 26, 2012 3:50 pm, insgesamt ein Mal bearbeitet


Reply

When you know you will use a tripod, there is no reason for using high ISO (unless if you like the grain)
With most films, you should adjust exposure time with compensation for long exposures.
Usually, this compensation information is available on the web sites of film producers. Or, you can search the internet
for information about your specific film.
Keep in mind that B&W film, although not as demanding as slide film, is still a lot more demanding than colour negative.
It is especially easy to lose information in the shadows with B&W film if you don't expose properly.
So always expose for the shadows when using B&W film. It is easier to take shadows down when printing if you exposed them too much,
than to bring them up if you exposed them too little.


Reply

what are you talking about with "general problem with long exposures" is Schwarzschild effect or Reciprocity failure

with very short (less than 1/2000) or very long (more than ~1sec) exposures you must compensate exposition because film sensitivity doesn´t behave linear. the size of EV correction depends on type of film and length of exposure, for each type you may find it in datasheet. with long exposures you should generally add + 1-3EV to achieve correct exposure.

I found Rollei Superpan200 datasheet but it doesn´t include information on longer exposures, but from my experience with other films I´d say 2-3EV would do the trick for exposures of 10-100s.

Here you can find information on Agfa APX100 behaviour with long exposures (page6)

cheers:)


Reply

Thx for the input. I didn't know that B/W is more challenging in exposure than color film.

After some more googeling around I found this table for the AGFA APX100 which seems to be more accurate than the original AGFA table

Code:
Reciprocity Table for Agfa APX 100

1 sec = 2 sec
2 sec = 4 sec
4 sec = 11 sec
8 sec = 29 sec
10 sec = 39 sec
20 sec = 1 min 47 sec
30 sec = 3 min 15 sec
40 sec = 5 min
50 sec = 7 min
1 min = 9 min 12 sec
1 min 10 sec = 11 min 38 sec
1 min 20 sec = 14 min 14 sec
1 min 30 sec = 17 min 3 sec
1 min 40 sec = 20 min


Unfortunately I also can't find any tables for Superpan 200...


Reply

ForenSeil hat folgendes geschrieben::
Thx for the input. I didn't know that B/W is more challenging in exposure than color film.
Schwarzschild effect applies to both BW and colour films. I´d say that the more challenging one is colour film, because very long exposures lead to colour shift which needs to be corrected with special filter. Also when shooting under artificial light (which is likely possible when shooting urban sceneries at night) you must adjust light temperature with filter, because films are ussualy corrected for day light (there some specials - f.e. tungsten films like Fuji 64T).

I wouldn´t bother that you don´t have table for long-exposures for Superpan. Do you develop films yourself? If yes, you can just adjust the exposure and developing time to get results you want, it takes only few test rolls of film:) I´d start with exposure times simmilar to Agfa.


Reply

Karl Schwarzschild, one of the BEST minds which died too young Crying or Very sad ...


Reply

[quote="berraneck"]
ForenSeil hat folgendes geschrieben::
...Do you develop films yourself? If yes, you can just adjust the exposure and developing time to get results you want, it takes only few test rolls of film:) I´d start with exposure times simmilar to Agfa.

Yes I develope the film myself - and there's the problem - only 2 rolls superpan left Wink not much space of experimenting around
But I will start with the AGFA times, even when it's a completly different emulsion.


Reply

yay:) 2rolls aren´t enough for a serie, so I wouldn´t waste them for tests if you don´t have source of them.. all at all, over-exposing shouldn´t make problem so don´t be afraid to add more exposure at night. also the scenery at night is ussually less contrasty, so developing film more contrasty is a positive. thumbs up!