MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

M42 to EF and M42 to FD
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi guys..

I was messing around with some lenses I sort have inherited from a mate....

and i noticed that the aperture fins internally only change when the little pin on the back of the lens is pressed in...now this may be a noob type question but...the adaptor I have doesn't push this pin in so I am assuming I am getting no aperture adjustment whatsoever...

which I have to say is annoying! are there any adapters that solve this pin issue??? I have no interest in the ones with the auot chips by the way....

also I noticed that this adapter with the zeiss 50mm lens I have seems to knock about like it's not sitting flush..not happy at all!

the lens is lovely...

any pointers guys?

Buzz


Reply

If there is no M and A switch then you are gonna need a M42 camera to operate the aperture using the pin, the digital guys usually take the pin away to use ( if it has a m/a switch).


Reply

yes it does have!!! i dont know why i didnt even think of it..many thanks!!!

it's a lovely lens....

can you reccomend a better adapter..mine seems to rock on it's body mount slightly?


Reply

It would help if you could tell us what lenses you have.

M42 lenses with the pin are known as "Auto" lenses. In auto mode, the blades remain wide open until the pin is pushed, which allows wide-open focussing and composing on compatible cameras. The pin is pushed in by a bar in the camera when the shutter is fired, which closes the blades to the chosen setting before the shutter opens. Most M42 auto lenses have a kind of switch or lever known as an A-M or Auto-Manual switch, and by switching to Manual mode you can override the auto operation and open and close the blades manually using the aperture dial.

If your lenses don't have this switch then you can buy M42-EOS adapters which have a flange or ledge which pushes in the pin as you screw the lens into the adapter and keeps it pushed, so you can use the lens in manual mode. This pic shows both types. The lens in A & B is a manual lens, without a pin. If you used lens C in adapter A the pin would be covered by the flange.


Big_Is is a well-known Ebay seller of adapters. This one has a flange and also a chip which causes the camera to beep when the lens is accurately focussed, like an AF lens, but this doesn't always work or help focussing a lot.
Klicke hier, um es auf Ebay zu sehen


Zuletzt bearbeitet von peterqd am Sa Jan 07, 2012 9:11 pm, insgesamt ein Mal bearbeitet


Reply

beurling hat folgendes geschrieben::
yes it does have!!! i dont know why i didnt even think of it..many thanks!!!

it's a lovely lens....

can you reccomend a better adapter..mine seems to rock on it's body mount slightly?


Well if you are using a film camera then try and buy the makers own M42 adaptor e.g Canon converter P


Reply

hi..picture c most acurately shows the lens i was on about...

I use my lenses on my eos 500 d and my ae-1 program...

i know they are not always interchangeable but i try to buy lenses that can be adapted to both...it's helpful when cash is an issue Smile