| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Mo Jul 05, 2010 9:11 pm Titel: Leitax bayonet |
|
 Verfasst am: Mo Jul 05, 2010 9:11 pm Titel: Leitax bayonet |
|
|
Rolf wrote:
Hi,
bought last week 1 first Leitax bayonet for Leica R mount to Nikon. Today this bayonet received. Btw thank you very much David for the quick shipment.
I decided to convert the Elmar 4/180 which I planned to sell (but noone purchased this very fine lens ). I needed perhaps 10 minutes and everything was very easy and without any problem.
Due to the good experience I ordered today 3 additional bayonets to convert some other Leica-R lenses mainly for not common focal lenghts like 250mm or 400mm/500mm.
Below a first test shot to try out whether the system works or not (nothing special)
 _________________ Rolf |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Mo Jul 05, 2010 9:13 pm Titel: |
|
 Verfasst am: Mo Jul 05, 2010 9:13 pm Titel: |
|
|
Orio wrote:
I really like this photo. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Mo Jul 05, 2010 9:35 pm Titel: |
|
 Verfasst am: Mo Jul 05, 2010 9:35 pm Titel: |
|
|
Rolf wrote:
Thank you
 _________________ Rolf |
|
| Nach oben |
|
 |
poilu
 Anmeldungsdatum: 26.08.2007 Beiträge: 10476 Wohnort: Greece
Expire: 2019-08-29
|
 Verfasst am: Mo Jul 05, 2010 10:25 pm Titel: |
|
 Verfasst am: Mo Jul 05, 2010 10:25 pm Titel: |
|
|
poilu wrote:
great conversion, now work both Nikon-Canon
& superb sample! _________________ T* |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Di Jul 06, 2010 8:18 am Titel: |
|
 Verfasst am: Di Jul 06, 2010 8:18 am Titel: |
|
|
Rolf wrote:
Thank you Poilu. What did you said few days ago about NikonLand ? I believe you had right !
Here few new samples with this lens and Leitax bayonet.
 _________________ Rolf |
|
| Nach oben |
|
 |
integrale
 Anmeldungsdatum: 04.09.2009 Beiträge: 136 Wohnort: Denmark
|
 Verfasst am: Di Jul 06, 2010 8:47 am Titel: |
|
 Verfasst am: Di Jul 06, 2010 8:47 am Titel: |
|
|
integrale wrote:
Great shots that really show the potential of R-lenses on a Nikon body.
I have several Leitz/Leica R-lenses (35, 50, 90, 100, 135, 250, 500) converted with the Leitax solution and can only recommend this as a swift and reasonably priced way to get quality lenses on your camera.
My latest conversion is a Leica APO-Macro-Elmarit-R 100/2.8. I asked David Llado of Leitax to add the Dandelion chip to the mount because I have run out of available slots in the Non-CPU lenses menu in my D700
I dont understand why nobody wanted your R-lenses; they where priced VERY reasonable.
I have the 250/4 and it is (in many respects) a solid piece of glass. The 180 looks very good also. I already have a Nikkor AF-n 180/2.8 so unfortunatey, I was not a bidder for your 180. _________________ Jakob |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Di Jul 06, 2010 1:31 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 1:31 pm Titel: |
|
|
Rolf wrote:
Thank you Jakob.
Perhaps you can help me. I found on page 210 the input for non-cpu lenses into the system (1-9) - but maybe that I´m to stupid but I didn´t understand the programming guide on the leitax side (or better the link to the Russion side with the programming explanation of this chip).
Do you have better information or links within the Internet ?
Many thanks in advance. _________________ Rolf
Zuletzt bearbeitet von Rolf am Di Jul 06, 2010 1:55 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
integrale
 Anmeldungsdatum: 04.09.2009 Beiträge: 136 Wohnort: Denmark
|
 Verfasst am: Di Jul 06, 2010 1:51 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 1:51 pm Titel: |
|
|
integrale wrote:
Hi Rolf
I had to e-mail David Llado to understand the advantages of the chip to users of "higher end Nikon DSLRs". The trick is, that on (presumably) "lower end" Nikon cameras (see footnote below!) there is no metering without the chip, so you're on your own metering vise.
On D700 (and also D300, I do not know about other Nikons) you can manually enter focal length and max aparture value in the Non-CPU lens menu and then just choose the lens when mounting it.
With the chip, you get transfer of this information automatically, so your D700 "recognises" the lens without the need to enter the info through the menus.
As a D700 user, this is a more convenient way and it eliminates the need to correct EXIF data when you forget to change the menu setting after changing the lens.
Footnote: the use of higher vs lower end is not in any way derogative; I use a D40 with great pleasure (and reasonable results...).
EDIT: PS: There is only 9 slots available in the D700 for Non-CPU lens profiles, and I have more than 9 non-CPU lenses, so the chip was obviously a nice addition for me  _________________ Jakob |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Di Jul 06, 2010 2:09 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 2:09 pm Titel: |
|
|
Rolf wrote:
Thank you Jakob, I found in the meantime the repective pages within the D700 handbook and I understand the differnces.
Anyway, I have problems with the explanation within the programming guide of the chip. When I will start programming in M-mode with 3 shots (1,5 or 6 and then again 1 sec.) nothing happened. So I have the first problem to start the programmig mode. Does this wotk on your cam without any problem ?
Thanks again.
 _________________ Rolf |
|
| Nach oben |
|
 |
integrale
 Anmeldungsdatum: 04.09.2009 Beiträge: 136 Wohnort: Denmark
|
 Verfasst am: Di Jul 06, 2010 3:07 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 3:07 pm Titel: |
|
|
integrale wrote:
"Does this wotk on your cam without any problem ?"
Flawlessly, it was the easiest set-up I have EVER tried...
Just kidding
No, it was a real pain to set up. It took me ages, and I really learned how to reset the chip! But in the end I succeeded, somehow! Don't ask me how, but I managed. _________________ Jakob |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Di Jul 06, 2010 4:07 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 4:07 pm Titel: |
|
|
Rolf wrote:
Hi Jakob, the problem is solved. I made a mistake - unfortunately I didn´t know which one. But now it works without any error and I´m happy now. Maybe it is too hot here today and the brain is lazy and dry.
Many thanks for your assistance and best regards
 _________________ Rolf |
|
| Nach oben |
|
 |
integrale
 Anmeldungsdatum: 04.09.2009 Beiträge: 136 Wohnort: Denmark
|
 Verfasst am: Di Jul 06, 2010 4:35 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 4:35 pm Titel: |
|
|
integrale wrote:
My pleasure - I'm happy to be of some assistance
My experience (it sounds like you had same experience) was:
d***!!! .... d*****!!! .... d****!!! ... ... ... HEY it works ?!? _________________ Jakob |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Di Jul 06, 2010 9:44 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 9:44 pm Titel: |
|
|
Rolf wrote:
Finally here few additional images
 _________________ Rolf |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Di Jul 06, 2010 9:58 pm Titel: |
|
 Verfasst am: Di Jul 06, 2010 9:58 pm Titel: |
|
|
Attila wrote:
Stunning combo! Beautiful colors, sharpness ! |
|
| Nach oben |
|
 |
hexi
 Anmeldungsdatum: 01.07.2009 Beiträge: 1631 Wohnort: France
Expire: 2011-11-18
|
 Verfasst am: Do Aug 04, 2011 6:56 pm Titel: |
|
 Verfasst am: Do Aug 04, 2011 6:56 pm Titel: |
|
|
hexi wrote:
Hi here
I'll try this conversion soon , on a 1.7/50 CY Planar ( ok i have a ZF already but hey ) the CY one is a beauty of a lens as well
i'm curious about the result, but seeing those samples, i think it's good. i also had adapter issues, so i'm taking no risks to see a lens fall by mistake _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Do Aug 04, 2011 7:14 pm Titel: |
|
 Verfasst am: Do Aug 04, 2011 7:14 pm Titel: |
|
|
Rolf wrote:
As far as I know the conversion of a CY is more complicated than a Leica.
Like to see your shots soon and hear about your experiences with the conversion.
 _________________ Rolf |
|
| Nach oben |
|
 |
hexi
 Anmeldungsdatum: 01.07.2009 Beiträge: 1631 Wohnort: France
Expire: 2011-11-18
|
 Verfasst am: Do Aug 04, 2011 8:20 pm Titel: |
|
 Verfasst am: Do Aug 04, 2011 8:20 pm Titel: |
|
|
hexi wrote:
The conversion will be done by Mr Leitax himself : )
i don't want to to mess up something, this is a little beyond my skills and certainly nerves . i'll post pix when i got it back for sure _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Do Aug 04, 2011 8:36 pm Titel: |
|
 Verfasst am: Do Aug 04, 2011 8:36 pm Titel: |
|
|
Rolf wrote:
| hexi hat folgendes geschrieben:: |
The conversion will be done by Mr Leitax himself : )
i...... |
Good idea.
 _________________ Rolf |
|
| Nach oben |
|
 |
hexi
 Anmeldungsdatum: 01.07.2009 Beiträge: 1631 Wohnort: France
Expire: 2011-11-18
|
 Verfasst am: Di Sep 20, 2011 8:20 pm Titel: |
|
 Verfasst am: Di Sep 20, 2011 8:20 pm Titel: |
|
|
hexi wrote:
Hello here
Just got my Leitax converted Planar.
First, David has made a great job and the conversion is perfect, the lens doesn't move whatsoever ( forget adapters ! ). the package contained the original C/Y mount as well in case of mind change : )
I used Zeiss on film, C/Y that is, but never on dslr.
I've done some quick shots ... looks promising .
Not the best subject, but i like the color rendition a lot, a bit warm, and accurate. The pic is a raw file, as is. If that's the way of spending less time on post production programs i'm all in !
For those hesitating, i highly recommend David's conversions. I think i'll give it another try with a .... new lens
here goes the test pic, oh so amazing. This is wide open @ 3200 iso on the D700.
 _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Nach oben |
|
 |
yinyangbt
 Anmeldungsdatum: 08.10.2010 Beiträge: 1973 Wohnort: Romania
Expire: 2012-12-27
|
 Verfasst am: Do Sep 22, 2011 3:58 pm Titel: |
|
 Verfasst am: Do Sep 22, 2011 3:58 pm Titel: |
|
|
yinyangbt wrote:
Beautiful results ! _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915 |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Do Sep 22, 2011 4:43 pm Titel: |
|
 Verfasst am: Do Sep 22, 2011 4:43 pm Titel: |
|
|
Orio wrote:
Hexi, you can not judge the colour performance of a lens when you took a tungsten lamp photo at 3200 ISO without balancing the white.
You need to do that, the fact that it's digital gives no guarantee that what you photograph in tungsten light is the correct colouration "out of the box".
Having said that, I agree that Leitax products are very high quality. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
xjjohnno
 Anmeldungsdatum: 07.04.2009 Beiträge: 1270 Wohnort: Melbourne Australia
Expire: 2011-11-18
|
 Verfasst am: Do Sep 22, 2011 10:51 pm Titel: |
|
 Verfasst am: Do Sep 22, 2011 10:51 pm Titel: |
|
|
xjjohnno wrote:
I've done 3 Leitax conversions, a 50m Summilux, 90mm Elmarit and a Telyt 560. The Telyt 560 required filing down of the anti glare shade thingy at the bayonet end to get proper clearance. The other lenses were a very simple and easy operation. |
|
| Nach oben |
|
 |
Lordcamel
 Anmeldungsdatum: 10.07.2011 Beiträge: 70
|
 Verfasst am: Do Sep 29, 2011 9:51 am Titel: |
|
 Verfasst am: Do Sep 29, 2011 9:51 am Titel: |
|
|
Lordcamel wrote:
Same experience for me the conversions (50 + 90 mm Leica R) went smoothly.
The only one I ve had problem with is the conversion of a 50 mm 1.7 planar but it was my fault for not buying a MM version but a AE version.
I worked on it for 2 hours and almost disassembled the lens itself and then got stuck reassembling it and David told me I could send it to him and he will reassemble it free of charge ...
Really nice guy with high quality product ! _________________ To Sell :
Leica R 180 APO 3.4
Leica R 60 Elmarit
Looking for :
Fuji 14 / 56 mm lenses |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|