MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Konica A4 Sensia 100 Tetenal E-6 DIY E-6 JOBO EPSON V500
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Konica A4 Sensia 100 Tetenel E-6 DIY E-6 JOBO EPSON V500

Hi-res images are here

First roll Smile














Zuletzt bearbeitet von Attila am Mo Jun 27, 2011 1:50 am, insgesamt 2 Male bearbeitet


Reply

great series, nice colors
remove noise reduction of your scanner, not needed for 100 iso slide


Reply

Beautiful, I never believed E-6 of this quality was possible with home dev!

Many thanks for showing this, further inspiration for me!


Reply

Read this

http://www.yarki.net/E6/


Reply

poilu hat folgendes geschrieben::
great series, nice colors
remove noise reduction of your scanner, not needed for 100 iso slide


Require quite a much sharpening , so noise reduction is essential , need to find best balance.


Reply

Great series and well done home processing of slide film


Reply

Is this some of Rawhead's expired 120? I see some purple tint that is more pronounced in some slides than others. I wouldn't blame the processing if you're using that film, since it does have a slight purple hue.

Examining the images, when they are slides I look at the whites for evidence of "blow-out" and deep shadows for evidence of "blocking up." This is an exposure issue, but still. In this case, all of Attila's slides' exposures are spot-on. Next I look at colors, especially in the mid tones -- like the grays -- and this is where I see the purple shift in some of the images.

Attila, if you're using an Epson to scan your slides and Epson software, try clicking on "Color Restoration." I find it usually works very well for slides whose colors have shifted.

Back in the 1980s I processed my own slide film, not to save money but because I needed the next-day turn-around. I just used one of those single reel Yankee tanks that had the thermometer built into the spinner and put the tank in a bath to keep the temp constant, monitoring the temp with that cheezy little thermometer on that spinner. First time I tried it, my slides had a noticeably greenish tint. All the other times after that, though, I got good results.

Anyway, seeing Attila's great results, this makes my want to DIY again. Unfortunately, it appears that there is only one set of chemicals on the market in the USA left to do it -- the Arista kit from Freestyle. I wish there was a better selection, although I believe it was Arista I used back in the 80s. No Jobo kit for me (too expensive), so I'll just try using a similar bath type setup I used before.


Reply

I had same experience Michael simple tank did work to me well 20 yrs before too. Magenta cast is exactly scanning problem I got same when this batch of slide was developed by a pro lab. I think I did try color restoration and I wasn't happy with that. I look forward your DIY E-6 great cost saver and lot of fun.