| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Di Jun 07, 2011 9:43 pm Titel: Which shutter for 2-inch lens barrel? |
|
 Verfasst am: Di Jun 07, 2011 9:43 pm Titel: Which shutter for 2-inch lens barrel? |
|
|
iangreenhalgh1 wrote:
Hi folks
I have bought a second copy of my beloved Ross Xpress f4 5inch lens.
This lens will cover 6x18cm and I want to use it on a 6x18 120 rollfilm camera I am building for panoramic photography.
What I need to know are what shutters will fit this lens which has a 2inch (51mm) diameter barrel?
I'm not bothered what type of shutter, even an early Kodak roller bearing one will do, as long as it will accomodate my Ross lens' barrel... _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mi Jun 08, 2011 1:46 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 1:46 am Titel: |
|
|
luisalegria wrote:
The Ross Xpres 5" can cover 5x7 ?
I think there was a wide angle version of the Xpres, are you sure thats what you've got ?
Anyway, the critical points here are the diameter of the thread on the back, if you are planning to front-mount it on a shutter, and whether the shutter will cause it to vignette on your format as you will be effectively mounting a narrow-ish tube behind the rear element.
These guys know all about it, you may want to check with them -
http://www.skgrimes.com/lensmount/front/index.htm
It seems to me you hay be looking at a #4 size, just like that Ilex pictured; if you're lucky maybe a #3.
The other alternative would be to dismount the front and rear groups and fit them to a shutter, where you may be able to get away with a smaller shutter. But this will require more machining and careful fitting, rescribing f/stops, etc. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Mi Jun 08, 2011 2:27 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 2:27 am Titel: |
|
|
iangreenhalgh1 wrote:
The info I have been able to find says that the Ross Xpress I have has a 70 degree field of view and was designed to cover a 2.25" x 7" area, which is 6x18cm isn't it? Or is it effectively 6x17?
The Pentac 8 inch f2.9 was used in the same Williamson aerial cameras as the Ross Xpress and has the same coverage area apparently.
I know nothing about shutters, maybe I need to buy a lens and shutter combo instead, any suggestions for ones that will cover 6x18? _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Mi Jun 08, 2011 2:44 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 2:44 am Titel: |
|
|
iangreenhalgh1 wrote:
I found this info about an Aircraft Torpedo Camera that used this lens to shoot a 2.25" x 7.25" panoramic image on 120 rollfim:
| Zitat: |
Aircraft Torpedo Camera
By James S. Vilett
2010 ©
Burke and James Inc. (Chicago IL) designed and manufactured view cameras, portrait cameras, lenses, darkroom, and other items. They also imported Toyo view cameras. In the 1970’s the company was bought by ILex Optical, and later by Burleigh Brooks Optics. The company probably failed due to employee embezzlement and shut down about 1981 or 1982.
The Aircraft Torpedo Camera was manufactured for the U.S. Navy during late WWII by Russel Vought a division of Solar Aircraft Company. The camera is of British design and came in two non-interchangeable models, either 12 or 24 volts. The voltage of each camera was marked clearly on a large side plate. They were made up until at least early 1944. The purpose of the camera was to determine the results of a torpedo squadron’s torpedo attack. The camera was attached to the aircraft and bore-sighted with the aircraft’s line of flight. When the torpedo was released the camera was simultaneously electrically fired. The camera produced 2¼"x 7¼" negatives on rolls of specially spooled 120 film. (This is the actual size of my negatives.) Photographs could be analyzed to determine target identification, and also if a torpedo hit had been made on the target. These cameras were also used in training to check pilot technique without having to fire a live torpedo. When the plane made a run on a ship the picture was taken. They were able to tell if the pilot in training would have sunk the ship from the picture. This was much cheaper than firing a torpedo. Also sinking a ship in training might not have been a great idea. Pictures were cheaper by just a bit. Opps pushed the wrong button, sorry guys.
The camera was equipped with a solenoid-fired louvered horizontal-blind shutter with a single speed of 1/100th of a second. The shutter was electrically fired;and could be opened manually with a lever for bore-sighting. High speed Super-XX Panchromatic film was used and allowed 4 pictures per roll of film. While the film was the standard 120 size it did have a longer leader, and the take-up spool was geared for electric advance. The film magazines were removable. The film was electrically advanced when the camera was fired. It took 51 seconds for the next film frame to be ready to fire. It was suggested that this was not a problem as each plane only carried one torpedo. Carrying only one torpedo might have been a slight drawback. Call it a hit or miss thing. One flaw in the original design was the end film magazine latch did not lock tightly against the camera which tended to caused light leaks. The film backs had no dark slides so the roll had to be fully used before removing the back. (After the war film backs were often used to mount on 5x7 cameras to make them into panorama cameras.) Once the camera was mounted on the plane a special 2¼”x7¼” ground-glass back was used to bore-sight the camera. The lens was an f4.0 Ross Express barrel lens of 5” focal length. The f stop for the camera had to be set manually before takeoff of the aircraft. These cameras were often wing mounted; changing the f stop setting during flight could have been a slight problem. It was advised that it was better to overexpose the negatives rather than underexpose them. The lens came with a large clamp on yellow filter. During flight the air between the lens and the filter was heated to prevent condensation. The heater was on whenever power was being supplied to the camera. The pilot was advised that the master power switch to the camera be left OFF except during the actual torpedo run. The entire outfit came in a large wooden box with the camera, two film backs, a ground glass focusing back, and an aircraft mount. The electric motors were built into the camera body making a massive heavy cast aluminum camera.
After the war the cameras sold in raw form at Harringays war surplus in London (and probably other places). Burke and James (nicknamed-bunk and junk) bought many of these cameras for conversion to panoramic 120 cameras for civilian use. Early B&J versions (later called Mark II) were sold in the late fifties as the “Royal Panorama”; and were offered with the original lens with only the 1/100th speed shutter. Which sounds pretty much like an original camera less the electric parts to me? I have not seen one of these early conversions. The Mark III version was by far the better version and cost slightly more ($324.50 in 1963). This camera was offered at least up until 1971. For this version the lens, motors, solenoids, gearing, shutter, and all other electrical parts were removed. Once B&J cut off all the wires and motors they were left with an empty shell with a 120 roll film back. The electrical hookup box had to be sawed off the main casting, and a large protruding casting at the back also had to be sawed off. Once this was done numerous holes then had to be sealed on the original body casting. B&J then designed and machined a helical lens focusing mount. Next the early B&J Mark III cameras added a 4 ¾” f6.8 Schneider Angulon in dial set Compur. By 1971, later version Mark III models had a 120mm f6.8 fully coated Angulon lens in a rim-set Synchro-Compur shutter. A red film window and a manual advance were added to the film backs. Once converted by B&J these Mark III cameras were marketed as the “PANORAM 120” VIEW CAMERA. What you got from Burke and James is a converted camera that took 2¼" x 7¼" panorama pictures, with a film back and a ground-glass back, the case was sold separately. In 1963 B&J sold the B&J carrying case for $27.00; a spare magazine for $28.00; and a spare focusing panel for $24.00.
The ground glass viewing glass was nice. It allowed the user to use the camera much more like a panoramic view camera. The only bad part was that all viewing had to be done prior to the first shot due to the lack of a darkslide. These cameras interestingly may be upgraded to an even more modern optic by installation of a 120mm f6.8 Grandagon lens which has almost the exact flange to focal length distance as the 120mm f6.8 Angulon and also will cover 7 ¼”negative.
J. J. Chesna was a senior repairman/chief machinist for B&J. As I understand it, the company lacked funds to pay him when He retired (about 1971 I think) so they gave him this B&J Panorama 120 camera. Mr. Chesna designed, machined and upgraded the film back side-latch (of this camera) to fix light leaks. Also shown in this article are some of B&J’s original engineering drawing for camera conversion. Mr. Chesna used to do his own darkroom work and some of his prints are also shown.
The converted B&J Panorama 120 camera has a coated 120mm f6.8 Schneider Angulon in an MX Synchro-Compur shutter. Shutter speeds are T, B ,1 – 1/400th of a second with a lever for viewing at all speeds. F stops are from f6.8 to f32. The mount is a helical focusing mount designed to focus from infinity down to 10 feet. There is a special wire sports finder. (The glass finder in the camera picture is a later non-B&J custom addition) Once the film is loaded exposures are shot at 1 - 3 - 5 and 7 for a total of 4 pictures per roll. Film spacing is set using a small red film window at the back of the camera. A large handle (which reminds me of a fence gate handle) is attached to the side of the camera with standard hardware store type sheet metal screws. A special film back side-latch is attached to this camera to avoid light leaks on the film. With the ground glass back attached this may be used like a view camera and pre-focused before taking the pictures. The quality of pictures is a little soft with the lens wide open, but pictures are much sharper when the lens is stopped down to around f8. I often think of shooting this camera as just winging it. |
http://site.jimscamerasseattle.com/vbandjpanorama/index.html
So basically, I'm hoping to DIY a camera similar to that one, I have the lens, just need to find a shutter, the other parts I will take from a broken folder then make the body from MDF or maybe even real wood. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mi Jun 08, 2011 3:10 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 3:10 am Titel: |
|
|
luisalegria wrote:
Well, its definitely a "wide angle" type, being as its says so right on it, so I guess it will cover your format.
And it doesn't have a thread at the back, unless the whole thing unscrews from the flange.
And it doesn't look like it will easily come apart into front and rear cells.
The problem with mounting it on a shutter is as I said, its got to be a big enough shutter; based on the published sizes I'd say you want something like a #4 Ilex, which has about a 2 1/4" front cell thread. These aren't too common. There are similar sized Deckel Compound shutters.
Wollensak also made large shutters (trademarks were Alphax, Betax, etc.). There is a #4 Alphax that should also work for you, I have one on my 15" Graflex Optar.
In my experience none of these large shutters are easy to come by. The most common source I've seen are the Wollensak Raptar/Graflex Optar tele lenses; the 15" (380mm) in particular, sometimes these can be found in shutter and they aren't generally that expensive.
Sometimes they do come up in ebay - here's one in your size, looks like a #4 Alphax-
http://cgi.ebay.com/U-S-NAVY-ALPHAX-SHUTTER-/200615118973?pt=LH_DefaultDomain_0&hash=item2eb597c87d
And a #4 Ilex with a nice Ilex Tessar -
http://cgi.ebay.com/Ilex-Paragon-Anastigmat-F-4-5-E-F-8-1-2-S-4-Shut-/320708014865?pt=Camera_Lenses&hash=item4aabaff311
Have you checked the S.K.Grimes site on the subject of the Packard shutter ? That is probably simpler and cheaper, though you won't get much choice in speeds. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Mi Jun 08, 2011 3:59 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 3:59 am Titel: |
|
|
iangreenhalgh1 wrote:
I've realised that a shutter isn't going to be cheap.
I have looked at packard shutter, there is one on ebay with a 2 inch hole right now.
I'm starting to think it might be better for the time being to get a pinhole panoramic Holga and add a lens and shutter to that and just shoot 6x12 which is a pretty big negative and will allow me to learn how to shoot film panoramas and give me practice developing my own film while I hunt for the parts to build a larger 6x18 camera and more importantly save up some money to buy those parts as I would like to get a good shutter as the Ross lens deserves a good shutter imho. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
Scheimpflug
 Anmeldungsdatum: 06.02.2010 Beiträge: 1888 Wohnort: New Zealand / USA
Expire: 2011-11-18
|
 Verfasst am: Mi Jun 08, 2011 4:18 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 4:18 am Titel: |
|
|
Scheimpflug wrote:
If you were really desperate, you could just add a very very dense ND filter to lengthen the exposure times, and then use a simple lens cap as a shutter.
Otherwise, depending on how much fabrication you are up for, there are quite a few shutter designs which scale up very well. Guillotine ("drop-board") shutters are probably the most common design, and rotary shutters are simple as well. If you are building a camera, I would think that either of these shutter designs should be well within your capabilities.  _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Mi Jun 08, 2011 4:52 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 4:52 am Titel: |
|
|
iangreenhalgh1 wrote:
I'm not so sure I am capable of fabricating a shutter.
When I say make a camera, all I planed to do was take the spools, roller and winding knob plus some other bits like the little red window from a broken mf folder and use them in a crude wooden box to run 120 rollfilm horizontally, I have a set of enlarger bellows to mount on the front for focusing although I only really intend to use this camera at infinity for landscapes.
Or I might just buy two Holga pinhole panoramics, cut the opposite ends off them, glue them together then add a housing on the front the right depth for the lens to be at infinity and add the lens/shutter combo et voila, a simple 6x18 panoramic.
The dense ND filter and lens cap idea is perhaps something I could try sometime just as a fun experiment, maybe I can find some slower 25 or 50 ASA 120 film for that. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mi Jun 08, 2011 5:58 am Titel: |
|
 Verfasst am: Mi Jun 08, 2011 5:58 am Titel: |
|
|
luisalegria wrote:
If you want a lens - or even a camera - to shoot 6x12 -
Look for a Kodak 3A - If possible, a "Special" like this -
http://cgi.ebay.com/Vintage-KODAK-No-3A-Autographic-Special-Folding-Camera-/170648391359?pt=US_Vintage_Cameras&hash=item27bb6fcebf
Somebody got a steal on this. Thats a top-of-the-line Wollensak Optimo air-regulated shutter with a 170mm Tessar. This will cover 6x12. Sometimes the "specials" had Deckel Compound shutters also, sometimes Bausch&Lomb Tessars, sometimes Cooke or Goerz lenses.
I always look when I see a 3A.
The 3A, if you can find one with good bellows, is almost ready made as a 6x12 camera BTW. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Mi Jun 08, 2011 12:58 pm Titel: |
|
 Verfasst am: Mi Jun 08, 2011 12:58 pm Titel: |
|
|
iangreenhalgh1 wrote:
Excellent Luis, that is the kind of info I need!
I had no idea about the 3A, certainly a better starting point than a cheap plastic Holga pinole panoramic!
Apart from the 3A are there any other old folders I should keep my eye out for? _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mi Jun 08, 2011 4:23 pm Titel: |
|
 Verfasst am: Mi Jun 08, 2011 4:23 pm Titel: |
|
|
luisalegria wrote:
There are loads of 6x9 120 film folders of course, many in quite usable condition. If you are just looking for a camera to shoot 120 and learn developing then any of these will do really.
Very cheap and decent ones are the postwar Franka Rollfix models with Prontor shutter and triplet lenses like Schneider Radionar or Rodenstock Trinar, etc. The guys here most certainly have plenty of recommendations.
If you want to look for "exotic" lenses and shutters on the cheap, hunt for old Kodak "specials", the 1A and 2A models as well as the 3A's. I have Cooke, Zeiss, Schneider, Goerz and Bausch&Lomb lenses from these, as well as Optimo, Compound and Compur shutters. And then there are German folders and plate cameras. Often a "wreck" of a camera will give you a prize like a Zeiss Tessar 13.5cm in a Compur shutter.
The more common Rapid Rectilinear lenses on these "specials" and others can also be very good. The worst thing about the Rapid Rectilinears is they are limited to f/8. I have a largish collection by now. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Mi Jun 08, 2011 8:09 pm Titel: |
|
 Verfasst am: Mi Jun 08, 2011 8:09 pm Titel: |
|
|
luisalegria wrote:
Kodak 3A Special with Deckel Compound shutter and Zeiss - Kodak rebranded Tessar -
http://cgi.ebay.com/Vintage-Folding-Camera-Model-No-3A-Special-Kodak-w-Case-/160598038708?pt=US_Vintage_Cameras&hash=item25646398b4
Looks nice. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
iangreenhalgh1
 Anmeldungsdatum: 18.03.2011 Beiträge: 15679
Expire: 2014-01-07
|
 Verfasst am: Mi Jun 08, 2011 8:33 pm Titel: |
|
 Verfasst am: Mi Jun 08, 2011 8:33 pm Titel: |
|
|
iangreenhalgh1 wrote:
Thanks for the info, I already have a ZI Nettar for 6x6, I have shot rollfilm and done a lot of 35mm developing but it was nearly 20 years ago...
Reason I'm interested in rollfilm is the large negativa and the panoramic possibilities... _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|