MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Helios 44m-4 and its focus
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hello! (Yaps new here Wink)

I entered the MF lens world recently, and the first lens I bought was the Helios 44m-4... I was really excited and loved the bokeh but after buying the Pentacon 50/1.8 and seeing it was really sharp even wide-open... I started to think something was wrong with my Helios.

So I made some tests only using the focus confirm from my Canon 450d, and it induces me in a few cm error... Enough to remove the focus from an entire face if I trust the AF confirm, my only option is to disassemble and try to correct the focusing from the Helios right?

(I really don't know how the camera knows when something is in focus Razz, until discovering the MF lenses I thought it was based on distance)

thanks in advance!


Reply

***I entered the MF lens world recently, and the first lens I bought was the Helios 44m-4... I was really excited and loved the bokeh but after buying the Pentacon 50/1.8 and seeing it was really sharp even wide-open... I started to think something was wrong with my Helios.***

Could be quality control and your helios is indeed inferior, some same spec lenses can be different i.e when you mass produce lenses (or anything) there is a machine/assembly etc tolerance.


Reply

Hi. I don't exactly know how is in your camera, but I own a pentax mz-5, and I don't use the focus confirmation because it is much less accurate than visual focussing. Instead of that, I installed the focussing screen of a junker super-A. Nevertheless, FSU lenses are frequently found with a bad collimated focus. It is very easy to adjust the infinity focus in the Helios, but you have to be able to check for sharpness in the focussing screen of your camera (or trust the focus confirmation). If you need instructions, please, let me know and I will try to explain how to do it.

Regards

Javier


Reply

The 450D has live view. Use that to focus if using wide apertures. AF confirm chips are not accurate enough.


Reply

Big bump Razz

Since the subject is the same I'm going to use this thread.

Well the problem with the Helios back-focusing remains but meanwhile I bought a Pentacon 50/1.8 and for my surprise the AF assist works 100% accurate with this lens. Right in the spot and even with poor light it manages to find a focus point better than my eye Razz

For a moment I thought the problem was solely with the Helios but... I bought a Mamiya/Sekor 55/1.4 and it suffers from the same back-focusing problem. It doesn't matter what aperture I use...

My question is... Is the pentacon reworked for this "digital" age (some mod made by the previous owner) or I had poor luck with the other 2?


Reply

Just a thought here-

I use a lot of lenses from folders, etc and have found that some lenses focus more accurately on my Canon XTi when focused from near to far and also some in the other direction. Also, focus slowly when checking for the above.