MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Pentacon 200mm f4 separated the cemented element
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hello,

I recently opened a Pentacon for cleaning and while cleaning the lens elements, the two front cemented parts just separated maybe because of hot water used for cleaning (aprox. 40-50 deg centigrade).

What can be the loss if I don't re cement the elements optically speaking.
And if I want to re cement them what will I need?

Also another question: how to clean lenses and not get small dust particles inside ? No matter how well I blow dust away and use brushes there are still some small dust particles on the lenses.

Thanks.


Reply

sadness hat folgendes geschrieben::
Hello,

I recently opened a Pentacon for cleaning and while cleaning the lens elements, the two front cemented parts just separated maybe because of hot water used for cleaning (aprox. 40-50 deg centigrade).

What can be the loss if I don't re cement the elements optically speaking.
And if I want to re cement them what will I need?

Also another question: how to clean lenses and not get small dust particles inside ? No matter how well I blow dust away and use brushes there are still some small dust particles on the lenses.

Thanks.


erm why didn't you ask the forum how to clean lenses before you started.....re cementing elements together is a specialised job and not for ya average handy man.


Reply

Only really old lenses are cemented with Canada balsam and are heat separable. All polymer cements used since WWII are heat proof beyond the boiling point of water. So there must already have been something wrong with the cementing.

Home re-cementing is not really advisable - even less so when the lens has already separated so that you cannot make marks and templates to re-centre the lens to the old position mechanically (which you'd have to if you don't have the needed test equipment to centre it optically).


Reply

I followed many threads of repairing lenses and actually never seen that this could happen, especially on rather new lens I guess like this one, and this was not my first lens either.

Anyway I put it back together and here is a crop from a test picture, to me it doesn't look too different from what I have tested before, didn't have previous of the operation the oportunity to test it stoped down as blades were stuck.

100% crop @f4 - quite soft but not very different from before


Now stoped down seems ok but I might be wrong.