| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
gearsNcogs
 Anmeldungsdatum: 20.10.2010 Beiträge: 215
|
 Verfasst am: Di Nov 23, 2010 5:40 pm Titel: A Few Upkeep Questions |
|
 Verfasst am: Di Nov 23, 2010 5:40 pm Titel: A Few Upkeep Questions |
|
|
gearsNcogs wrote:
1) What is a safe way of cleaning the outsides of lenses? (the body, not the optics)
2a) what causes focus rings to get stiff?
2b) does it make sense that a focus ring would be more stiff in one spot? or should stiffness be uniform?
3) is there any way (aside from disassembling the lens) to fix focus ring stiffness?
4) why do people store their lenses with the front element down?
Thanks! _________________ Stills: SLR: Asahi Pentax Spotmatic SP, DSLR: Canon EOS Rebel XTi, Canon EOS 7D
Cine: 16mm: Krasnogorsk-3 (M42 mount) 8mm: Revere Model 88 Super 8: Bell and Howell 1235 XL Filmosonic
MF Lenses: M42: Meteor 5-1 KMZ 17-69mm 1:1,9 (Cine Only), Asahi Super Takumar 50mm 1:1.4, Focal MC 28mm 1:2.8, Tele-Lentar 135mm 1:2.8, Helios-44 KMZ 58mm 1:2, Helios-44-2 KMZ 58mm 1:2 M39: Industar-26M 50mm 1:2.8 F: Nikon Nikkor 50mm 1:1.8 EF: Lensbaby Composer f2 w/Double Glass Optic, Rokinon 35mm 1:1.4 AS UMC, Rokinon 85mm T1.5 AS IF UMC
AF Lenses: EF-S: Canon EF-S 18-55mm 1:3.5-5.6 II, EF: Tamron AF 70-300mm 1:4-5.6 TELE-MACRO (1:2), Canon EF 50mm 1:1.8 II
Fixed-Focus Lenses: D: Elitar 6.5mm 1:1.9, Wollensak-Revere 13mm 1:2.5 Velostigmat |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Di Nov 23, 2010 6:34 pm Titel: Re: A Few Upkeep Questions |
|
 Verfasst am: Di Nov 23, 2010 6:34 pm Titel: Re: A Few Upkeep Questions |
|
|
Attila wrote:
| gearsNcogs hat folgendes geschrieben:: |
1) What is a safe way of cleaning the outsides of lenses? (the body, not the optics)
2a) what causes focus rings to get stiff?
2b) does it make sense that a focus ring would be more stiff in one spot? or should stiffness be uniform?
3) is there any way (aside from disassembling the lens) to fix focus ring stiffness?
4) why do people store their lenses with the front element down?
Thanks! |
1) depend from lens tube material, alu is different than plastic.
Pure alcohol usually good for everything if dirt is not too strong.
2)I has several reason one of them no more grease or too old.
b) can happen with many lenses , for example it was dropped down
3) if reason just grease problem you can fix it.
4) focusing helicoid in this position bellow blades and on hot summer days can't go onto blades and make it them stuck. This position is takes less space on shelf than others.
This is not a good storage technic lens get less light than on side positions. |
|
| Nach oben |
|
 |
gearsNcogs
 Anmeldungsdatum: 20.10.2010 Beiträge: 215
|
 Verfasst am: Di Nov 23, 2010 6:54 pm Titel: |
|
 Verfasst am: Di Nov 23, 2010 6:54 pm Titel: |
|
|
gearsNcogs wrote:
Thanks for the help Attila! two of my lenses have pretty stiff focus rings, so i'll try giving them a little grease. This might be a silly question, but is there any particular way to do this? _________________ Stills: SLR: Asahi Pentax Spotmatic SP, DSLR: Canon EOS Rebel XTi, Canon EOS 7D
Cine: 16mm: Krasnogorsk-3 (M42 mount) 8mm: Revere Model 88 Super 8: Bell and Howell 1235 XL Filmosonic
MF Lenses: M42: Meteor 5-1 KMZ 17-69mm 1:1,9 (Cine Only), Asahi Super Takumar 50mm 1:1.4, Focal MC 28mm 1:2.8, Tele-Lentar 135mm 1:2.8, Helios-44 KMZ 58mm 1:2, Helios-44-2 KMZ 58mm 1:2 M39: Industar-26M 50mm 1:2.8 F: Nikon Nikkor 50mm 1:1.8 EF: Lensbaby Composer f2 w/Double Glass Optic, Rokinon 35mm 1:1.4 AS UMC, Rokinon 85mm T1.5 AS IF UMC
AF Lenses: EF-S: Canon EF-S 18-55mm 1:3.5-5.6 II, EF: Tamron AF 70-300mm 1:4-5.6 TELE-MACRO (1:2), Canon EF 50mm 1:1.8 II
Fixed-Focus Lenses: D: Elitar 6.5mm 1:1.9, Wollensak-Revere 13mm 1:2.5 Velostigmat |
|
| Nach oben |
|
 |
8310
 Anmeldungsdatum: 05.06.2010 Beiträge: 123
|
 Verfasst am: Di Nov 23, 2010 7:01 pm Titel: |
|
 Verfasst am: Di Nov 23, 2010 7:01 pm Titel: |
|
|
8310 wrote:
3) Sometimes turning the focus ring for a while can make it go easier. "Sometimes" is stressed here, most of the stiff focus rings I came across could have been turned until the cows come home.
I have heard some people had success by warming up the lens a little (not too much, say, 50°C or something). I tried it once and it helped as long as the lens was still warm, but afterwards it was as stiff as ever.
It might be worth a try, but in my experience there is not much hope in bypassing relubrication.
Zuletzt bearbeitet von 8310 am Di Nov 23, 2010 7:14 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
8310
 Anmeldungsdatum: 05.06.2010 Beiträge: 123
|
 Verfasst am: Di Nov 23, 2010 7:11 pm Titel: |
|
 Verfasst am: Di Nov 23, 2010 7:11 pm Titel: |
|
|
8310 wrote:
| gearsNcogs hat folgendes geschrieben:: |
| Thanks for the help Attila! two of my lenses have pretty stiff focus rings, so i'll try giving them a little grease. This might be a silly question, but is there any particular way to do this? |
Well, disassembling, removing the old grease from the helicoid, putting the new stuff on and reassembling.
I would not recommend trying to "inject" grease into the lens somehow without disassembling it, if that was your idea. It is going to end up everywhere except the place it is supposed to (worst case: on lens elements and the diaphragm). Besides, usually the stiff old grease would still be there, so you would only make things worse. |
|
| Nach oben |
|
 |
gearsNcogs
 Anmeldungsdatum: 20.10.2010 Beiträge: 215
|
 Verfasst am: Di Nov 23, 2010 7:11 pm Titel: |
|
 Verfasst am: Di Nov 23, 2010 7:11 pm Titel: |
|
|
gearsNcogs wrote:
| 8310 hat folgendes geschrieben:: |
3) Sometimes turning the focus ring for a while can make it go easier. "Sometimes" is stressed here, most of the stiff focus rings I came across could have been turned until the cows come home.
I have heard people having success by warming up the lens a little (not too much, say, 50°C or something). I tried it once and it helped as long as the lens was still warm, but afterwards it was as stiff as ever.
It might be worth a try, but in my experience there is not much hope in bypassing relubrication. |
that's an interesting idea, i never would have thought of that. thanks for your help _________________ Stills: SLR: Asahi Pentax Spotmatic SP, DSLR: Canon EOS Rebel XTi, Canon EOS 7D
Cine: 16mm: Krasnogorsk-3 (M42 mount) 8mm: Revere Model 88 Super 8: Bell and Howell 1235 XL Filmosonic
MF Lenses: M42: Meteor 5-1 KMZ 17-69mm 1:1,9 (Cine Only), Asahi Super Takumar 50mm 1:1.4, Focal MC 28mm 1:2.8, Tele-Lentar 135mm 1:2.8, Helios-44 KMZ 58mm 1:2, Helios-44-2 KMZ 58mm 1:2 M39: Industar-26M 50mm 1:2.8 F: Nikon Nikkor 50mm 1:1.8 EF: Lensbaby Composer f2 w/Double Glass Optic, Rokinon 35mm 1:1.4 AS UMC, Rokinon 85mm T1.5 AS IF UMC
AF Lenses: EF-S: Canon EF-S 18-55mm 1:3.5-5.6 II, EF: Tamron AF 70-300mm 1:4-5.6 TELE-MACRO (1:2), Canon EF 50mm 1:1.8 II
Fixed-Focus Lenses: D: Elitar 6.5mm 1:1.9, Wollensak-Revere 13mm 1:2.5 Velostigmat |
|
| Nach oben |
|
 |
gearsNcogs
 Anmeldungsdatum: 20.10.2010 Beiträge: 215
|
 Verfasst am: Di Nov 23, 2010 8:11 pm Titel: |
|
 Verfasst am: Di Nov 23, 2010 8:11 pm Titel: |
|
|
gearsNcogs wrote:
| 8310 hat folgendes geschrieben:: |
| gearsNcogs hat folgendes geschrieben:: |
| Thanks for the help Attila! two of my lenses have pretty stiff focus rings, so i'll try giving them a little grease. This might be a silly question, but is there any particular way to do this? |
Well, disassembling, removing the old grease from the helicoid, putting the new stuff on and reassembling.
I would not recommend trying to "inject" grease into the lens somehow without disassembling it, if that was your idea. It is going to end up everywhere except the place it is supposed to (worst case: on lens elements and the diaphragm). Besides, usually the stiff old grease would still be there, so you would only make things worse. |
oh, ok. well, its a good thing i haven't tried it yet! thanks for the info, i misunderstood what Attila was saying. Maybe one day i'll get them serviced, but for now a stiff focus ring isn't the end of the world. _________________ Stills: SLR: Asahi Pentax Spotmatic SP, DSLR: Canon EOS Rebel XTi, Canon EOS 7D
Cine: 16mm: Krasnogorsk-3 (M42 mount) 8mm: Revere Model 88 Super 8: Bell and Howell 1235 XL Filmosonic
MF Lenses: M42: Meteor 5-1 KMZ 17-69mm 1:1,9 (Cine Only), Asahi Super Takumar 50mm 1:1.4, Focal MC 28mm 1:2.8, Tele-Lentar 135mm 1:2.8, Helios-44 KMZ 58mm 1:2, Helios-44-2 KMZ 58mm 1:2 M39: Industar-26M 50mm 1:2.8 F: Nikon Nikkor 50mm 1:1.8 EF: Lensbaby Composer f2 w/Double Glass Optic, Rokinon 35mm 1:1.4 AS UMC, Rokinon 85mm T1.5 AS IF UMC
AF Lenses: EF-S: Canon EF-S 18-55mm 1:3.5-5.6 II, EF: Tamron AF 70-300mm 1:4-5.6 TELE-MACRO (1:2), Canon EF 50mm 1:1.8 II
Fixed-Focus Lenses: D: Elitar 6.5mm 1:1.9, Wollensak-Revere 13mm 1:2.5 Velostigmat |
|
| Nach oben |
|
 |
pat donnelly
 Anmeldungsdatum: 19.01.2010 Beiträge: 666 Wohnort: Brisbane, Australia
|
 Verfasst am: Do Nov 25, 2010 10:42 am Titel: Ultrasonics! |
|
 Verfasst am: Do Nov 25, 2010 10:42 am Titel: Ultrasonics! |
|
|
pat donnelly wrote:
42KHz 50w
Has anyone used these devices for cleansing lenses? Theoretically a $40 unit can contain individual elements and shake off all but grease?
Practically though, what are the pitfalls? Please respond, based upon experience? _________________ ---------------------------------
EP-1, E-410, E-300, D100, D1,
C-Mt: 25mm 1.9, 75mm 1.4, 75mm 1.3, 75mm 1.9, Ultra wides, one inch sensor, 20+ c-mount zooms
OM 350mm f2.8, Nikkor 180 f2.8, Exa 180 f2.8,
Tamrons: 90mm f2.5, 500mm f8 x3, 135 f2.5, 200 f3.5, 24mm 2.5, 28mm 2.5 x8,
FD 500mm mirror lens |
|
| Nach oben |
|
 |
Big Dawg
 Anmeldungsdatum: 28.01.2009 Beiträge: 2530 Wohnort: Thach Alabama
|
 Verfasst am: Do Nov 25, 2010 2:46 pm Titel: |
|
 Verfasst am: Do Nov 25, 2010 2:46 pm Titel: |
|
|
Big Dawg wrote:
Store lens on their side!
+1 Attila. _________________ Big Dawg |
|
| Nach oben |
|
 |
estudleon
 Anmeldungsdatum: 15.05.2008 Beiträge: 3754 Wohnort: Argentina
|
 Verfasst am: Do Nov 25, 2010 2:54 pm Titel: |
|
 Verfasst am: Do Nov 25, 2010 2:54 pm Titel: |
|
|
estudleon wrote:
| Big Dawg hat folgendes geschrieben:: |
Store lens on their side!
+1 Attila. |
Some fans lenses say that they must be in side down position, but alternating the four sides. I ask to me. How do the know the sides that were down and whcih is the next?
Crazy guys!!! _________________ Konica 2,8/100
CZJ: 4/20, 2,4/35, 1,8/50 aus jena, 3,5/135MC, Pentacon 1,8/50
Pentax S-M-C-1,4/50
Helios 44-3
Mamiya 2,8/135
Misc. : jupiter 9
Stuff used:
A) SRL
Alpa 10 D - kern macro Switar 1,9/50 -black, Kilffit apochromat 2/100.
Asahi pentax spotmatic super takumar 1,4/50
Contaflex super B tessar 2,8/50 Pro-tessar 115
Leica R3 electronic summicron 2/50 elmarit 2,8/35
Konica Autoreflex 3 (2 black and chrome one), TC, T4. 2,8/24, 3,5/28 not MC and MC, 1,8/40, 1,4/50, 1,7/50 MC and not MC, 1,8/85, 3,2/135, 3,5/135, 4/200
Minolta XG9 2,8/35, 2/45, 3,5/135
Nikkormat FTn 1,4/50, 2,8/135
Fujica ST 801, 605, 705n. 3,5/19, 1,4/50, 1,8/55, 4/85, 3,5/135.
Praktica MTL 5 and a lot of M42 lenses.
Voigtlander. Bessamatic m, bessamatix de luxe, bessamatic cs, ultramatic and ultramatic cs.
Skoparex 3,5/35, skopagon 2/40, skopar 2,8/50, skopar X 2,8/50, super lanthar (out of catalogue) 2,8/50, dinarex 3,4/90, dinarex 4,8/100, super dinarex 4/135, super dinarex 4/200, zoomar 2,8/36-83, portrait lens 0, 1 and 2. Curtagon 4/28 and 2,8/35
Canon AV1, 1,8/50
Rolleiflex SL35 and SL35 E. 2,8/35 angulon, 2,8/35 distagon, 1,4/55 rolleinar, 1,8/50 planar, 4/135 tessar, 2,8/135 rolleinar, x2 rollei, M42 to rollei adap.
Etc.
RF
Yashica Minister III
Voightlander Vito, vitomatic I, Vito C, etc.
Leica M. M2, M3 (d.s.) and M4. Schenider 3,4/21, 2/35 summaron 2,8/35 (with eyes). Summicron 2/35 (8 elements with eyes), 2/35 chrome, 2/35 black, 1,4/35 pre asph and aspheric - old -, 2/40 summicron, 2,8/50 elmar, 2/50 7 elements, 2/50 DR, 2/50 - minolta version, 1,4/50 summilux 1966 version, 1,4/75 summilux, 2/90 large version, 2/90 reduced version of 1987, 2,8/90 elmarit large version, 4/135 elmar. |
|
| Nach oben |
|
 |
martinsmith99
 Anmeldungsdatum: 31.08.2008 Beiträge: 7029 Wohnort: S Glos, UK
Expire: 2013-11-18
|
 Verfasst am: Fr Nov 26, 2010 7:13 am Titel: |
|
 Verfasst am: Fr Nov 26, 2010 7:13 am Titel: |
|
|
martinsmith99 wrote:
Why should they be stored on sides?
I store mine front element down due to lack of storage space. If there's a good reason I will have to rethink this. _________________ Casual attendance these days |
|
| Nach oben |
|
 |
|
|