MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

doable: swapping out lens mount plate CV125?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Is swapping out a lens body from one mounting plate (canon) with a Nikon plate doable? And when I ask "doable" I mean is it "simply" a matter of changing the mounting plates, or is there a lot more to it? (focal plane distances, etc)?

I found a dealer from china who insists that he can do this, to give me a lens that will focus to infinity without any issues at all, and mount onto a Nikon body, whereas the lens originally has a canon mount. Any replies appreciated.


Reply

There's a link ...

http://forum.mflenses.com/nikon-d40-modified-to-m42-t20965.html

... which describes the replacement of the Nikon F mount on a D40 with an M42 mount.

Presumably you could do it with a Canon mount athough, IIRC, the Canon mount has a wider throat than Nikon F and this might cause problems.


Reply

Hi,

I'm far from being an expert, but i would say that mounting a Canon lens on a Nikon body keeping infinity focus without additional diopters would be almost impossible: the Canon EF register distance for lenses is 44mm, while Nikon has a register distance of 46.5mm. Moreover, the throat of a Canon mount has a diameter of 54mm, where the Nikon one has 44mm only ...

Definitively, i would say that a Nikon lens can be mounted on a Canon body without hassle, while the opposite is almost impossible: even if the barrel of the lens would be shortened of about 2.5mm, you would still have the problem of the diameter of the bottom of the lens ...

But, as said before, i can be wrong ...

Cheers


Reply

There would be a lot more to do than switching plates and I believe the job is downright impossible for the reasons explained by the gentlemen before me.


Reply

jf56 hat folgendes geschrieben::
Is swapping out a lens body from one mounting plate (canon) with a Nikon plate doable? And when I ask "doable" I mean is it "simply" a matter of changing the mounting plates, or is there a lot more to it? (focal plane distances, etc)?

I found a dealer from china who insists that he can do this, to give me a lens that will focus to infinity without any issues at all, and mount onto a Nikon body, whereas the lens originally has a canon mount. Any replies appreciated.


Do you have any more details on the lens?

What you described could be as simple as swapping out the adapter on a T-mount, TX-mount, or Adaptall/Adaptall-2 mount lens. In this case, it would take less than a minute to change the lens mount, provided the dealer had the right Nikon mount to put on it.

If the lens originally came with a fixed Canon mount (FL? FD? EOS?), then the process will require a dedicated conversion - potentially taking hours of time or not even being possible at all.


Reply

jf56 hat folgendes geschrieben::
I found a dealer from china who insists that he can do this, to give me a lens that will focus to infinity without any issues at all, and mount onto a Nikon body, whereas the lens originally has a canon mount. Any replies appreciated.


I guess that your lens is the Cosina-Voigtlaender 2.5/125. There's a guy on nikongear.com who converted this lens from Canon to Nikon mount. If you visit the site and carry out a search you might be able to find out more.