| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| What devices do you use for MF |
| AFconfirm chip |
|
31% |
[ 5 ] |
| MF dedicated screen |
|
25% |
[ 4 ] |
| viewfinder magnifier |
|
6% |
[ 1 ] |
| standard screen |
|
37% |
[ 6 ] |
|
| Stimmen insgesamt : 16 |
|
| Autor |
Nachricht |
yinyangbt
 Anmeldungsdatum: 08.10.2010 Beiträge: 1973 Wohnort: Romania
Expire: 2012-12-27
|
 Verfasst am: Mo Okt 18, 2010 6:19 pm Titel: AF confirm chips |
|
 Verfasst am: Mo Okt 18, 2010 6:19 pm Titel: AF confirm chips |
|
|
yinyangbt wrote:
Hello, again !
I start this topic , because I think that it is an interesting subject. There are a few models ,chinese and not chinese , programable and not,ready to be glued on the adapter or sold already glued on the adapter.Some are sold with some device that helps positioning the chip on the adapter.
I own just one chipped adapter M42 to Eos with AF Chip "Dandelion" IV Generation. EMF (made in Lituania or Belarus?): http://cgi.ebay.de/AF-Chip-Dandelion-Generation-IV-EMF-Canon-EOS-/350370598122?pt=DE_Elektronik_Computer_Foto_Camcorder_Foto_Camcorderzubeh%C3%B6r_PM&hash=item5193b70cea
On some bodies at least (Canon) the accuracy of the focus confirmation depends of the sense of rotation of the focusing ring.
On my Rebel XTi it seems that when I am turning the focus ring from close to infinity (counterclockwise) the af confirm is more accurate - at least when I set the camera on MF (the chip allows that ,or can be let on AF-but then I can't use F over 7,1 the af confirm doesn't operate and the shutter doesn't work). Then comes a field where I get beep (focus confirmation) but the result isn't sharp focus(this "zone of confirmed focus "is larger on a 20mm lens than on a 58mm lens).
I found another thread that says the better accuracy is from infinity to close http://forum.mflenses.com/canon-eos-af-confirmation-chip-quick-test-t32516,highlight,canon+autofocus.html
I think that the AF confirm chip should be helped by a viewfinder magnifier ( at least on a crop camera )
In your experience ,wich are the best and the best way to use them? _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915
Zuletzt bearbeitet von yinyangbt am Di Okt 19, 2010 7:17 pm, insgesamt 5 Male bearbeitet |
|
| Nach oben |
|
 |
yinyangbt
 Anmeldungsdatum: 08.10.2010 Beiträge: 1973 Wohnort: Romania
Expire: 2012-12-27
|
|
| Nach oben |
|
 |
LucisPictor
 Anmeldungsdatum: 26.02.2007 Beiträge: 17633 Wohnort: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Verfasst am: Di Okt 19, 2010 6:16 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 6:16 pm Titel: |
|
|
LucisPictor wrote:
With my 350D I used a split-screen and an eyepiece magnifier and sometimes an AF-chipped adapter.
With my 5D I only use the EE-S screen.
With my (new) old 300D and my 40D I use just the original screen. _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Nach oben |
|
 |
bogolisk
 Anmeldungsdatum: 20.12.2009 Beiträge: 448
Expire: 2011-11-18
|
 Verfasst am: Di Okt 19, 2010 6:18 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 6:18 pm Titel: |
|
|
bogolisk wrote:
I wish that there's something (firmware or chip) to help with CDAF on m4/3 cams. Or better, sensor-based PDAF or m4/3!  _________________ When I try to be a photographer I manage to add an f to art. |
|
| Nach oben |
|
 |
indianadinos
 Anmeldungsdatum: 06.07.2008 Beiträge: 1310 Wohnort: Toulouse, France
Expire: 2011-12-05
|
 Verfasst am: Di Okt 19, 2010 7:11 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 7:11 pm Titel: |
|
|
indianadinos wrote:
Hi,
I use a Katzeye split screen and a viewfinder magnifier for my K10D and an Eg-S screen for my 5D ...
But i'm willing to try an AF-confirm chip adapter on my EOS, just i don't know which one performs better ... _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Nach oben |
|
 |
ylyad
 Anmeldungsdatum: 01.06.2010 Beiträge: 476 Wohnort: Zentralschweiz
Expire: 2013-12-05
|
 Verfasst am: Di Okt 19, 2010 7:13 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 7:13 pm Titel: |
|
|
ylyad wrote:
I've two adapters, with chip and without. I more and more rely on the (standard) screen, but that's because I'm getting used to my gear. For my AF chip, I'd say focus is better from infinity than to infinity... _________________
Camera: Fuji X-E2, Fuji X100T
MF: Canon nFD 50/1.4, Canon nFD 100/2.8, Tokina RMC 135/2.8
Tamron SP 24-48/3.5-3.8
http://www.flickr.com/derdide/
|
|
| Nach oben |
|
 |
yinyangbt
 Anmeldungsdatum: 08.10.2010 Beiträge: 1973 Wohnort: Romania
Expire: 2012-12-27
|
 Verfasst am: Di Okt 19, 2010 7:24 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 7:24 pm Titel: |
|
|
yinyangbt wrote:
| ylyad hat folgendes geschrieben:: |
| I've two adapters, with chip and without. I more and more rely on the (standard) screen, but that's because I'm getting used to my gear. For my AF chip, I'd say focus is better from infinity than to infinity... |
getting addapted to the gear is very important .
And I think that's very important to stop (almost) instantly from rotating the focus ring .That requires attention and practice .
ylyad, what chip do you have , is a programable one or is a simple one? _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915 |
|
| Nach oben |
|
 |
William
 Anmeldungsdatum: 26.11.2009 Beiträge: 489 Wohnort: London
|
 Verfasst am: Di Okt 19, 2010 7:41 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 7:41 pm Titel: |
|
|
William wrote:
I was about to put a better focusing screen in my Canon before it met it's untimely end. With the K-x I am using the standard screen and nothing else, there is a much bigger viewfinder though. |
|
| Nach oben |
|
 |
ylyad
 Anmeldungsdatum: 01.06.2010 Beiträge: 476 Wohnort: Zentralschweiz
Expire: 2013-12-05
|
 Verfasst am: Di Okt 19, 2010 7:50 pm Titel: |
|
 Verfasst am: Di Okt 19, 2010 7:50 pm Titel: |
|
|
ylyad wrote:
| yinyangbt hat folgendes geschrieben:: |
getting addapted to the gear is very important .
And I think that's very important to stop (almost) instantly from rotating the focus ring .That requires attention and practice .
ylyad, what chip do you have , is a programable one or is a simple one? |
Standard one. One thing to mention: the pinhole is slightly too large, so contacts don't remain properly aligned while focusing - depends which way i'm turning to focus that does not help...
I was wondering getting a Big_Is programmable chip, but I'm also wondering additional gear and if I've to buy another ring, I'm thinking of another mount than M42 - but which one? CY? OM? K? Nikon? Ah, choici is difficult  _________________
Camera: Fuji X-E2, Fuji X100T
MF: Canon nFD 50/1.4, Canon nFD 100/2.8, Tokina RMC 135/2.8
Tamron SP 24-48/3.5-3.8
http://www.flickr.com/derdide/
|
|
| Nach oben |
|
 |
nemesis101
 Anmeldungsdatum: 25.03.2008 Beiträge: 2050 Wohnort: Oregon USA
Expire: 2015-01-22
|
 Verfasst am: Di Okt 19, 2010 8:35 pm Titel: Buy a Panny L-1 and you'll NEVER need a chip!!!! |
|
 Verfasst am: Di Okt 19, 2010 8:35 pm Titel: Buy a Panny L-1 and you'll NEVER need a chip!!!! |
|
|
nemesis101 wrote:
I have the Panasonic L-1.. not only can it take nearly any make of MF lens, but EVERY one is focus confirmed without the need for a chipped adapter!  _________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| Nach oben |
|
 |
mo
 Anmeldungsdatum: 27.08.2009 Beiträge: 8979 Wohnort: Australia
Expire: 2016-07-30
|
 Verfasst am: Mi Okt 20, 2010 6:13 am Titel: |
|
 Verfasst am: Mi Okt 20, 2010 6:13 am Titel: |
|
|
mo wrote:
I use the normal screen that came in the K200D. _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Nach oben |
|
 |
yinyangbt
 Anmeldungsdatum: 08.10.2010 Beiträge: 1973 Wohnort: Romania
Expire: 2012-12-27
|
 Verfasst am: Mi Okt 20, 2010 9:40 am Titel: |
|
 Verfasst am: Mi Okt 20, 2010 9:40 am Titel: |
|
|
yinyangbt wrote:
| ylyad hat folgendes geschrieben:: |
the pinhole is slightly too large, so contacts don't remain properly aligned while focusing - depends which way i'm turning to focus that does not help... |
This is an interesting explanation.Don't know if this is the right one.This means that your adapter wobbles alittle on the camera? Mine does the same thing .I must look at the dimensions of the pinhole.
this is why I refered at chips and not adapters .The idea is that one should buy the best adapter and eventually glue the chip on it. _________________ Cheers , Teo
http://photo.net/photodb/member-photos?user_id=5778915 |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|