MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Rangefinder window cover dimensions for a Yashica Lynx 1000?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Greetings earthlings,
Purchased a Yashica Lynx 1000 at a thrift store after work today. Downloaded the manual from Butkus and after comparing the photo to the camera noticed that mine is missing the little rangefinder window cover. Looks like there was a dab of model airplane glue at each corner to hold it on. Was wondering if someone could give me the exact size of the square window in the cover? I can make my own out of something.

Quite pleased with it. The slowest shutter speeds stuttered but after some exercising of faster speeds and working my way down they seem to be fine now. Rangefinder works fine.

Knew nothing about this camera before I saw it over my lunch hour. Silly me didn't buy it then but after some reading and research I decided it was worth $10 (included case and a Vivitar handheld light meter). Fortunately it was still there waiting for me after work!

I like it!

Darren Addy
Kearney, NE


Reply

Decided that I could approximate this pretty well using Photoshop and the image from the cover of the instruction manual. I used the skew tool to transform the image so that the rangefinder window was as close to square as I could make it. Then using the selection tool I came up with 21 pixels square as the dimension to go with. Then I used the selection tool again to measure the vertical dimension of the bezel that surrounds the rangefinder and metering window. That came to 63 pixels. So the window dimension is almost exactly 1/3 of the vertical dimension of the bezel.

So now all I have to do is take an actual measurement of the vertical dimension of the bezel (divide by 3) and I have the actual dimension of the square hole. Should be close anyway.

Darren Addy
Kearney, NE


Reply

These are good cams; hope you are successful with your fix.

There are several Yashica rangefinder fans at rangefinderforum.com who might be able to help you ...