| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Do Apr 08, 2010 6:44 am Titel: Take mount of Sonnar 135mm 2.8 AE |
|
 Verfasst am: Do Apr 08, 2010 6:44 am Titel: Take mount of Sonnar 135mm 2.8 AE |
|
|
a20010494 wrote:
This is an impossible task? Am i in troubles? I can only say that my frustration is reaching its limits!!
Ok, really, how to take the mount off? Anybody knows? _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
Scheimpflug
 Anmeldungsdatum: 06.02.2010 Beiträge: 1888 Wohnort: New Zealand / USA
Expire: 2011-11-18
|
 Verfasst am: Do Apr 08, 2010 6:45 am Titel: |
|
 Verfasst am: Do Apr 08, 2010 6:45 am Titel: |
|
|
Scheimpflug wrote:
Happen to have a photo? _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Do Apr 08, 2010 8:49 am Titel: |
|
 Verfasst am: Do Apr 08, 2010 8:49 am Titel: |
|
|
a20010494 wrote:
Now, yes, i have.
This mount comes from hell.....
Sorry for the fingerprints.
Sweet bokeh, huh?  _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
unclemack
 Anmeldungsdatum: 21.06.2009 Beiträge: 51 Wohnort: UK frozen north
|
 Verfasst am: Do Apr 08, 2010 9:13 am Titel: |
|
 Verfasst am: Do Apr 08, 2010 9:13 am Titel: |
|
|
unclemack wrote:
I don't remember your lens but try looking for access to screws through any holes in the aperture ring with the rubber removed (if it is rubber).
If there are any screws in the sleeve between the aperture & focus rings try removing them and sliding the sleeve forward - this may reveal the screws holding the mount assembly.
Sometimes the sleeve between the rear element & the mount unscrews.
Once in a while a lens has to be dismantled from the front.
Sorry my memory isn't better... |
|
| Nach oben |
|
 |
Kathmandu
 Anmeldungsdatum: 09.12.2009 Beiträge: 1479 Wohnort: (Kathmandu,Nepal. Currently)Pacific Northwest, USA
Expire: 2012-04-08
|
|
| Nach oben |
|
 |
wilson.c
 Anmeldungsdatum: 18.01.2010 Beiträge: 365 Wohnort: Hong Kong
|
 Verfasst am: Do Apr 08, 2010 11:19 am Titel: |
|
 Verfasst am: Do Apr 08, 2010 11:19 am Titel: |
|
|
wilson.c wrote:
There should be three screws underneath the rubber band towards the camera. On my Makro-Planar 100/2.8 the focus was a bit sloppy due to traveling in a box to me. I looked around and tightened them up and all is good. Is suppose if you take the screws out, it is possible to take the lens off the helicoid and allow access from the front.
Good luck with the project! _________________ Wilson
DMirrorless: Canon R5MkII, Sony a7CR, Hasselblad X2DII, 907X & CFV100C
DSLR: Canon 5DMkIV, 500D + Panasonic GF-1
SLR: Canon T90, Canon F1, Canon A1, Canon AE1 + Rolleiflex SL66 + Bronica ETRs
R'finder: Contax G1, G2 + Leica M6, M3 + Contax II
Lenses
M42: Angenieaux 90/1.8
Canon: FD 50/3.5 Macro, FD 80/1.8, FD 80-200L/4
Contax G: CZ Hologon 16/8, CZ Biogon 21/2.8, CZ Biogon 28/2.8, CZ Planar 45/2.0, CZ Sonnar 90/2.8
P-Six: CZJ Sonnar 180/2.8, CZJ Biometar 120/2.8
Contax: Distagon 28/2.8, Distagon 28/2, Planar 85/1.4, Makro-Planar 100/2.8
Others: CZ Sonnar 135/3.5 (Hasselblad V mount)
More little ones to be documented.
|
|
| Nach oben |
|
 |
unclemack
 Anmeldungsdatum: 21.06.2009 Beiträge: 51 Wohnort: UK frozen north
|
 Verfasst am: Do Apr 08, 2010 11:28 am Titel: |
|
 Verfasst am: Do Apr 08, 2010 11:28 am Titel: |
|
|
unclemack wrote:
Hi Kathmandu and thanks, you too!
Never read the adapters section so missed the other thread.
I don't recall ever seeing a lens mount fixed even partly with adhesive but most of my work was with Mamiya, Hasselblad, Nikon etc.
Heat will usually shift parts bonded even with epoxy - but with anything modern there's usually going to be plastic nearby. And the glass would need to be protected too of course.
Ugh! Just the thought of a glued-on lens mount makes me want to go shower... thanks for that!  |
|
| Nach oben |
|
 |
Kathmandu
 Anmeldungsdatum: 09.12.2009 Beiträge: 1479 Wohnort: (Kathmandu,Nepal. Currently)Pacific Northwest, USA
Expire: 2012-04-08
|
 Verfasst am: Do Apr 08, 2010 5:58 pm Titel: |
|
 Verfasst am: Do Apr 08, 2010 5:58 pm Titel: |
|
|
Kathmandu wrote:
wilson.c
| Zitat: |
| should be three screws underneath the rubber band towards the camera. On my Makro-Planar 100/2.8 the focus was a bit sloppy due to traveling in a box to me.. |
By all the looks of "a20010494"'s lens it's the AE version of the lens , and when I opened mine which was last year, the front along with inner barrel of the helicoid assembly just unscrews off with some torque . I used rubber band and careful placement of the sliding sunshade-there were no screws,and I did not need to mess with the rubber on the focus ring,to check for screws. The pictures I have posted are from that lens.
I dont know how opening the front is going to help in his case except to check out how the layout of how the front is made, and maybe look inside to see how the helical alignment rods are screwed to the mount itself in this case instead of the rim of the barrel .
He will still have to address the lens mount.Which IMO is not worth messing around with- with this version lens. It might be worth more selling it to someone with a Contax camera .The MM version of this lens has more possibilities for mount adaptation. |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Do Apr 08, 2010 8:04 pm Titel: |
|
 Verfasst am: Do Apr 08, 2010 8:04 pm Titel: |
|
|
a20010494 wrote:
It's good to take a sleep and retake things. My patience is on its 100% again.
Well, i removed the aperture rubber ring, and no, no screws. So, how do i heat this thing up? drown it on water?
-I took the smal thing that has 2 screws away (was glued.. i thought it was part of the mount, and i was able to remove the "upper" mount. Now i have access to 4 screws!  _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
Kathmandu
 Anmeldungsdatum: 09.12.2009 Beiträge: 1479 Wohnort: (Kathmandu,Nepal. Currently)Pacific Northwest, USA
Expire: 2012-04-08
|
 Verfasst am: Do Apr 08, 2010 9:35 pm Titel: |
|
 Verfasst am: Do Apr 08, 2010 9:35 pm Titel: |
|
|
Kathmandu wrote:
Those 4 screws hold the helical alignment rods , which is very difficult to screw back on again once your remove it, unless you open the front.
I am still going to suggest you put things back and consider selling the lens or buying a Contax camera for it.
Think about it
Regardos |
|
| Nach oben |
|
 |
unclemack
 Anmeldungsdatum: 21.06.2009 Beiträge: 51 Wohnort: UK frozen north
|
 Verfasst am: Do Apr 08, 2010 10:40 pm Titel: |
|
 Verfasst am: Do Apr 08, 2010 10:40 pm Titel: |
|
|
unclemack wrote:
Hi a20010494,
I would strongly suggest you follow Kathmandu's recommendation.
My intention was to dissuade you from using heat by warning of the possible consequences to your lens.
You could also badly burn yourself when using enough heat to loosen the adhesive bond.
Asking for advice on every detail is wise when you're unsure - but it suggests to me a lack of experience in this kind of work.
A slip of the hand or a moment's inattention can cause serious personal injury - I've injured myself lots of times, thankfully never too seriously.
I don't mean to be critical but I don't want anyone hurt by following what they thought was my advice.
Good luck with whatever you decide to do. |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Fr Apr 09, 2010 2:23 am Titel: |
|
 Verfasst am: Fr Apr 09, 2010 2:23 am Titel: |
|
|
a20010494 wrote:
Thanks. That's probably the best advice to follow-
But, i cant, and i wont. May sound too extreme but i never give up on things i want (only when i end breaking'em). _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Fr Apr 09, 2010 2:34 am Titel: |
|
 Verfasst am: Fr Apr 09, 2010 2:34 am Titel: |
|
|
a20010494 wrote:
As a designer, i've been taught to always discard my first idea. So enough of screwing/unscrewing. I got the solution. And i dont need to go deeper into the lens. I'ts not a pretty solution, but it would be great for SA users if everything goes ok. _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Fr Apr 09, 2010 3:21 am Titel: |
|
 Verfasst am: Fr Apr 09, 2010 3:21 am Titel: |
|
|
a20010494 wrote:
Watcha think?
It exactly fits on where the contax mount was (on the inner part) and fits the pentax mount on the outher part. I dont even have to take the flanges out. The thickness will be about 2mm, or whatever its necessary to reach infinite focus .
I can use the same pentax and zeiss screws to mount it. Would not be pretty, but i know it will work. _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Sa Mai 01, 2010 4:38 am Titel: :) |
|
 Verfasst am: Sa Mai 01, 2010 4:38 am Titel: :) |
|
|
a20010494 wrote:
 _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
unclemack
 Anmeldungsdatum: 21.06.2009 Beiträge: 51 Wohnort: UK frozen north
|
 Verfasst am: Sa Mai 01, 2010 1:07 pm Titel: |
|
 Verfasst am: Sa Mai 01, 2010 1:07 pm Titel: |
|
|
unclemack wrote:
Hi,
Nice result, congratulations!
All fingers present and correct?  |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Sa Mai 01, 2010 5:11 pm Titel: |
|
 Verfasst am: Sa Mai 01, 2010 5:11 pm Titel: |
|
|
a20010494 wrote:
Hi, sorry but i didnt understand your phrase.... _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
unclemack
 Anmeldungsdatum: 21.06.2009 Beiträge: 51 Wohnort: UK frozen north
|
 Verfasst am: Sa Mai 01, 2010 9:24 pm Titel: |
|
 Verfasst am: Sa Mai 01, 2010 9:24 pm Titel: |
|
|
unclemack wrote:
Erm... was just teasing really.
In my neck of the woods designers' skill with tools isn't highly regarded.
It's a result of those occasions when designs have to be returned because of manufacturing difficulties (or impossibilities).
Sorry. It's unreasonable to generalise in that way and I would only do so in fun.
So I was expressing the hope that you still have all your fingers after your project!
And again, congrats on your conversion... and on coming over to the Dark Side.  |
|
| Nach oben |
|
 |
a20010494
 Anmeldungsdatum: 15.02.2010 Beiträge: 396 Wohnort: Perú.
|
 Verfasst am: Mo Mai 03, 2010 7:35 am Titel: |
|
 Verfasst am: Mo Mai 03, 2010 7:35 am Titel: |
|
|
a20010494 wrote:
Hi, i just didnt understand the phrase... thats all!
Thanks for the explanation, hah, i just got it. _________________ www.estudiocaleidoscopio.com |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|