MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Contax G to m4/3?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Is it possible? The Contax G system has a lot of cheap but superb glass, too bad the system was short lived.


Reply

It should be possible.

Registration Distance:
Contax G: 29mm

FourThirds: 38.7mm
I think m4/3 is 1/2 FourThirds so: 19.35mm

Assuming the above is correct, than it should be possible to make an adapter.


Reply

I assume you are making it Alex? Very Happy


Reply

exe163 hat folgendes geschrieben::
I assume you are making it Alex? Very Happy


Laughing

I am not sure ...

I do not have Contax G lenses and also did not buy a Panasonic G1 yet


Reply

hk300 hat folgendes geschrieben::
exe163 hat folgendes geschrieben::
I assume you are making it Alex? Very Happy

Laughing
I am not sure ...
I do not have Contax G lenses and also did not buy a Panasonic G1 yet


Contax G lenses have an obstacle, that the mount on the camera turns the aperture ring to make it match the writings on the barrel.
Without this trick, the aperture will work just the same, but the barrel writings will not match the aperture values.
Anyway this is minor I think - if you could really make an adapter, it will be successful, as the G lenses are amongst the best lenses ever made for any camera - so much that Leica M users buy them to have them expensively converted to the M mount...


Reply

Will be keeping an eye on this. If you are successful, I would be looking for a micro 4/3.


Reply

As the lens (Contax G lens) without modification, you cannot adapt
these G-lenses to any system since there is no way to focus these.
They are driven by internal motor of G1/2 camera and its focus is
electrically controlled, the lens does not have manual focus ring. Crying or Very sad

UNLESS you supply helicoid in your fancy G->m4/3 adapter, it is hopeless.
IF you can make it in this way, you may be able to sell lots of adapters. Very Happy


Reply

koji hat folgendes geschrieben::
As the lens (Contax G lens) without modification, you cannot adapt
these G-lenses to any system since there is no way to focus these.
They are driven by internal motor of G1/2 camera and its focus is
electrically controlled, the lens does not have manual focus ring. Crying or Very sad

UNLESS you supply helicoid in your fancy G->m4/3 adapter, it is hopeless.
IF you can make it in this way, you may be able to sell lots of adapters. Very Happy


Laughing Laughing Laughing
that was my next plan ... make a helicoid/adapter with changeable plates.


Reply

That is a good news, Alex. Go for it.

I buy one when it is made, even tough I have no m4/3 camera (yet). Very Happy
(I wanted to use Hologon to digital camera, but conversion and the lens
together is fairly expensive so far.)


Reply

Finally "ginfinace" did it.

Klicke hier, um es auf Ebay zu sehen


Reply

This is great news, I gotta go get one now!


Reply

wilson.c hat folgendes geschrieben::
This is great news, I gotta go get one now!



hi Wilson ... welcome.

It is always nice to see fellow - HK-ers

Btw i sent you a pm