MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

NiMH AA cell charger
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I'm looking for suggestions on a good AA NiMH cell charging device!

I have a cheap Duracell charger, but the problem is that it doesn't do much more then charge. I would want a charger which could charge, discharge, refresh and test - and would have a monitoring system of some sort, preferably for individual cells. Charge time isn't an issue, but I'd prefer to steer clear of the so-called "turbo" chargers which charge 4x2700mAh AA cells in 20mins..

I've heard La Crosse chargers do this, but I've also heard really bad stories about them melting and overcharging cells to the brink of explosion, almost setting fire on the house.

Which chargers do you folks here use?


Reply

I bought the Lidl 'Tronic' NiMH charger a few months ago - they appear regularly, just keep an eye out for one. Approx €20, iirc.

It does 6xAAA, 6xAA, 2x C or D, and 2x PP3 (9v), or any mix of the above, all individually monitored. So far so good, in fact it's been a real bargain, as similar chargers were going for considerably more. I'll buy another one when they next appear.
It's not a slow charger, but not a 'turbo' one either. If I want to slow charge I have an Energiser lifting lid coffin type for 4xAAA AA C/D or a pair of plug-in 'Bleep' chargers which take the recommended 16 hours or so.


Reply

Energizer takes AA,AAA,9volt...just the basic 8hr charge,The batteries lasted about 6mths(rough guess)...that is with continual recharge use on the same 4 batteries on a point and shoot camera.


Reply

Nothing fancy here. I bought an Energizer charger with batteries first, and the charger lasted for a bit less than a year before it bit the dust. Bought some no-name charger with batteries next, and this time the batteries have bitten the dust, but the charger is still plugging along. It takes about 2 hours to charge a set of either two or four, but about the extent of its features is that it will sense the current state of charge of the batteries, and "top them off".


Reply

I have a Powertech charger that does all you are asking as well as ability to charge 9v batteries and all the cylindrical 1.5v battery size including Cs.s. Arlec is a name that comes to mind from what I've seen in the local electronics shop.


Reply

Hello there,
If you want to be able to test, cycle and charge/discharge cells, then take a look at the battery chargers that the radio-control electric flight enthusiasts use. You would need to add a battery holder for loose AA, AAA or other cells, but you can program these devices to almost any requirement from NiMH, NiCD, lead-acid to Lithium Ion Polymer (Lipo).

Regards

Angus


Reply

Photomac hat folgendes geschrieben::
Hello there,
If you want to be able to test, cycle and charge/discharge cells, then take a look at the battery chargers that the radio-control electric flight enthusiasts use. You would need to add a battery holder for loose AA, AAA or other cells, but you can program these devices to almost any requirement from NiMH, NiCD, lead-acid to Lithium Ion Polymer (Lipo).

Regards

Angus


+1

I've used a Maha MH-C777PLUS for the past 15 years for charging NiMH, Lion, AAA-D cells, and lead-acid batteries. There is a newer model...


Reply

I have a Voltcraft IPC-1 (La Crosse BC-900 in other markets). It does a reasonably good job at charging and cycling all kinds of AA and AAA cells, and several battery experts have declared it overcharging safe. Temperature monitoring is a bit deficient, but that is a issue it shares with every AA cell charger I know - it is wise to keep the heat sensor pads near the positive pole greased up with small blobs of thermal compound, particularly if you turbo charge or refresh cells.


Reply

siriusdogstar hat folgendes geschrieben::
Photomac hat folgendes geschrieben::
Hello there,
If you want to be able to test, cycle and charge/discharge cells, then take a look at the battery chargers that the radio-control electric flight enthusiasts use. You would need to add a battery holder for loose AA, AAA or other cells, but you can program these devices to almost any requirement from NiMH, NiCD, lead-acid to Lithium Ion Polymer (Lipo).

Regards

Angus


+1

I've used a Maha MH-C777PLUS for the past 15 years for charging NiMH, Lion, AAA-D cells, and lead-acid batteries. There is a newer model...


@siriusdogstar: I have been looking for Maha MH-C777PLUS for a long time. Could you advice where one may find it or the newer model of this charger?

@Photomac: would you advice one or post a link to such charger?


Reply

Hello Cheve,
I have several different makes of charger for my radio-control systems, but for a make that should be widely available across Europe at least I would look at Graupner (www.graupner.de). I have two of their chargers, and the Ultramat 12 is a simple straightforward unit that will do all of the battery management that you might want. The Ultramat Duo 30 that I have will do more, but not necessarily better, so the choice can be based on price and availability.

Regards

Angus


Reply

cheve hat folgendes geschrieben::
... @siriusdogstar: I have been looking for Maha MH-C777PLUS for a long time. Could you advice where one may find it or the newer model of this charger? ...


Ah I see now the "newer" version MH-C808M has less features, and is now a PowerEX product. My Maha MH-C777PLUS was purchased at Thomas Distributing; they sell the MH-C808M.

Try a search for "RC Battery Charger" to find equivalents/better-than-equivalents such as MRC SuperBrain 969, ProPeak Prodigy II, Thunder T6 Smart Balance Charger/Discharger, and others.


Reply

Photomac, siriusdogstar:

thank you for the pointers. Appreciate it very much.

Cheers(and Merry X'mas/happy holiday)