| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
cheve
 Anmeldungsdatum: 31.03.2009 Beiträge: 182
Expire: 2011-12-06
|
 Verfasst am: Mi Dez 23, 2009 3:33 am Titel: how to remove stripped screw off lens mount |
|
 Verfasst am: Mi Dez 23, 2009 3:33 am Titel: how to remove stripped screw off lens mount |
|
|
cheve wrote:
All,
as the title suggests, I was trying to open one of my lens which has a stuck focus barrel. The screws holding the lens mount, as it turns out, are made of very soft material and now the slot in the screw heads were stripped.
I did some web search and found a few approaches(eg http://www.wikihow.com/Remove-a-Stripped-Screw); but I do not know whether I can try them since the screws on the lens are very small(2mm slot type screw). I would appreciate your help and suggestions.
thanks for your time,
Cheers, _________________ Adaptall-2: 17/3.5(51B),80-210/3.8-4(103A),60-300/3.8-5.4(23A) C/Y: CZ 35-70/3.4,RMC Tokian 80-200/4.5
EXk: Topcor Re Auto 35/2.8(broken),135/3.5, Steinheil Culminar 135/4.5 Leitz-R: 50/2,90/2,180/4,180/3.4,Angenieux 35-70/2.5-3.3
M42: pentacon 135/2.8,135/2.8(preset),Super-Takumar 55/1.8,Meyer-Optik 50/1.8 FD: Voigtlander 125/2.5 SL
K: smc 50/1.2, porst 55/1.2, Takumar(Bayonet) 135/2.5 Minolta: rokker 58/1.4,58/1.2 nikkon: Nikkor H Auto 300/4.5
OM: 21/2,21/3.5,28/3.5,50/1.2,300/4.5,500/8,35-70/3.6, viv 17/3.5,viv 28/1.9,viv 135/2.3
Rollei: Voigtlander Color-Ultron 55/1.4 AR T: Tele-Astranar 135/3.5
EF: 30/1.4(Sigma),50/1.8,28-70L,80-200L,24-105L,70-300DO,18-200OS(Sigma)
|
|
| Nach oben |
|
 |
patrickh
 Anmeldungsdatum: 23.08.2007 Beiträge: 8551 Wohnort: Oregon
Expire: 2011-11-18
|
 Verfasst am: Mi Dez 23, 2009 6:37 am Titel: |
|
 Verfasst am: Mi Dez 23, 2009 6:37 am Titel: |
|
|
patrickh wrote:
I am in danger of having the same problem
patrickh _________________ DSLR: Nikon D300 Nikon D200 Nex 5N
MF Zooms: Kiron 28-85/3.5, 28-105/3.2, 75-150/3.5, Nikkor 50-135/3.5 AIS // MF Primes: Nikkor 20/4 AI, 24/2 AI, 28/2 AI, 28/2.8 AIS, 28/3.5 AI, 35/1.4 AIS, 35/2 AIS, 35/2.8 PC, 45/2.8 P, 50/1.4 AIS, 50/1.8 AIS, 50/2 AI, 55/2.8 AIS micro, 55/3.5 AI micro, 85/2 AI, 100/2,8 E, 105/1,8 AIS, 105/2,5 AIS, 135/2 AIS, 135/2.8 AIS, 200/4 AI, 200/4 AIS micro, 300/4.5 AI, 300/4.5 AI ED, Arsat 50/1.4, Kiron 28/2, Vivitar 28/2.5, Panagor 135/2.8, Tamron 28/2.5, Tamron 90/2.5 macro, Vivitar 90/2.5 macro (Tokina) Voigtlander 90/3.5 Vivitar 105/2.5 macro (Kiron) Kaleinar 100/2.8 AI Tamron 135/2.5, Vivitar 135/2.8CF, 200/3.5, Tokina 400/5,6
M42: Vivitar 28/2.5, Tamron 28/2.5, Formula5 28/2.8, Mamiya 28/2.8, Pentacon 29/2.8, Flektogon 35/2.4, Flektogon 35/2.8, Takumar 35/3.5, Curtagon 35/4, Takumar 50/1.4, Volna-6 50/2.8 macro, Mamiya 50/1.4, CZJ Pancolar 50/1,8, Oreston 50/1.8, Takumar 50/2, Industar 50/3.5, Sears 55/1.4, Helios 58/2, Jupiter 85/2, Helios 85/1.5, Takumar 105/2.8, Steinheil macro 105/4.5, Tamron 135/2.5, Jupiter 135/4, CZ 135/4, Steinheil Culminar 135/4,5, Jupiter 135/3.5, Takumar 135/3.5, Tair 135/2.8, Pentacon 135/2.8, CZ 135/2.8, Taika 135/3.5, Takumar 150/4, Jupiter 200/4, Takumar 200/4
Exakta: Topcon 100/2.8(M42), 35/2.8, 58/1.8, 135/2.8, 135/2.8 (M42), Kyoei Acall 135/3.5
C/Y: Yashica 28/2.8, 50/1.7, 135/2.8, Zeiss Planar 50/1.4, Distagon 25/2.8
Hexanon: 28/3.5, 35/2.8, 40/1.8, 50/1.7, 52/1.8, 135/3.2, 135/3.5, 35-70/3.5, 200/3.5
P6 : Mir 38 65/3.5, Biometar 80/2.8, Kaleinar 150/2.8, Sonnar 180/2.8
Minolta SR: 28/2.8, 28/3.5, 35/2.8, 45/2, 50/2, 58/1.4, 50/1.7, 135/2.8, 200/3.5
RF: Industar 53/2.8, Jupiter 8 50/2
Enlarg: Rodagon 50/5,6, 80/5,6, 105/5.6, Vario 44-52/4, 150/5.6 180/5.6 El Nikkor 50/2,8,63/2.8,75/4, 80/5,6, 105/5.6, 135/5.6 Schneider 60/5.6, 80/5.6, 80/4S,100/5.6S,105/5.6,135/5.6, 135/5.6S, 150/5.6S, Leica 95/4 |
|
| Nach oben |
|
 |
mo
 Anmeldungsdatum: 27.08.2009 Beiträge: 8979 Wohnort: Australia
Expire: 2016-07-30
|
 Verfasst am: Mi Dez 23, 2009 8:01 am Titel: |
|
 Verfasst am: Mi Dez 23, 2009 8:01 am Titel: |
|
|
mo wrote:
Something similar a screw tip of cheap screwdriver stuck in the screw  _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Nach oben |
|
 |
Photomac
Anmeldungsdatum: 11.01.2008 Beiträge: 47 Wohnort: Sutton Benger, UK
|
 Verfasst am: Mi Dez 23, 2009 11:40 am Titel: |
|
 Verfasst am: Mi Dez 23, 2009 11:40 am Titel: |
|
|
Photomac wrote:
Hello there,
Assuming that the screw is still firmly stuck in the lens (i.e. is not loose), then try something pointed and hard (like an engineer's scriber - it's big enough to hold properly) and by repeatedly scratching across the head of the screw create a new groove.
Then, before you try to remove the screw, use solvent to loosen any locking compound on the thread. I would use at least de-natured alcohol and acetone, since I have found screws locked with compounds that do not loosen in alcohol or do not loosen in acetone. (As far as I can tell the early Vivitars need acetone, most others have responded to alcohol.)
regards
Angus |
|
| Nach oben |
|
 |
visualopsins
 Anmeldungsdatum: 05.03.2009 Beiträge: 11698 Wohnort: California
Expire: 2027-07-11
|
 Verfasst am: Mi Dez 23, 2009 4:11 pm Titel: |
|
 Verfasst am: Mi Dez 23, 2009 4:11 pm Titel: |
|
|
visualopsins wrote:
a risky last-ditch solution is to clean the head with solvent and use a tiny droplet of epoxy to bond an old throw-away slightly smaller screwdriver to it, being ultra-careful not to let epoxy reach hole threads. after the epoxy sets unscrew. note some epoxies get thin and runny when curing; definitely not recommended. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Nach oben |
|
 |
cheve
 Anmeldungsdatum: 31.03.2009 Beiträge: 182
Expire: 2011-12-06
|
 Verfasst am: Do Dez 24, 2009 4:41 am Titel: |
|
 Verfasst am: Do Dez 24, 2009 4:41 am Titel: |
|
|
cheve wrote:
@siriusdogstar: thanks for the suggestions. I will try photomac's solution first(ie. make a bigger slot); if that fails, then I will fill the slot and glue some old nail/screw to provide a better grip
@Photomac: I have tried something called "liquid wrench" and it did not help. I will get some iso-alcohol to give it a try.
Cheers _________________ Adaptall-2: 17/3.5(51B),80-210/3.8-4(103A),60-300/3.8-5.4(23A) C/Y: CZ 35-70/3.4,RMC Tokian 80-200/4.5
EXk: Topcor Re Auto 35/2.8(broken),135/3.5, Steinheil Culminar 135/4.5 Leitz-R: 50/2,90/2,180/4,180/3.4,Angenieux 35-70/2.5-3.3
M42: pentacon 135/2.8,135/2.8(preset),Super-Takumar 55/1.8,Meyer-Optik 50/1.8 FD: Voigtlander 125/2.5 SL
K: smc 50/1.2, porst 55/1.2, Takumar(Bayonet) 135/2.5 Minolta: rokker 58/1.4,58/1.2 nikkon: Nikkor H Auto 300/4.5
OM: 21/2,21/3.5,28/3.5,50/1.2,300/4.5,500/8,35-70/3.6, viv 17/3.5,viv 28/1.9,viv 135/2.3
Rollei: Voigtlander Color-Ultron 55/1.4 AR T: Tele-Astranar 135/3.5
EF: 30/1.4(Sigma),50/1.8,28-70L,80-200L,24-105L,70-300DO,18-200OS(Sigma)
|
|
| Nach oben |
|
 |
unclemack
 Anmeldungsdatum: 21.06.2009 Beiträge: 51 Wohnort: UK frozen north
|
 Verfasst am: Fr Dez 25, 2009 11:52 pm Titel: |
|
 Verfasst am: Fr Dez 25, 2009 11:52 pm Titel: |
|
|
unclemack wrote:
Hi Cheve,
For next time the main thing is to use a perfectly-fitting screwdriver with a good grip. All mine have short lengths of thick hose on the shafts - you need to be able to exert force with control and you can't do that with normal jeweller's drivers. And cheap screwdrivers are worse than useless.
Screws are often jammed in older lenses. Heating the head of the screw with a soldering iron before you try to remove it helps a lot. Then plenty of downward pressure on the driver and a quick but controlled leftward twist usually does the trick. It takes practice though, no guarantees given!
Once a screw head is damaged things are much harder - you may have to use a small burr on a Dremel-type tool to remove the head, then once the mount is off you can undo the remains of the screw with pliers. A burr is much easier to keep centred in the screw head than a drill. Of course this assumes you have a replacement screw. I like diamond burrs by the way, very cheap nowadays.
No such thing as a screw extractor in a small enough size to be any help with cameras or lenses I'm afraid - the rest of the advice on the Wiki site is OK but if you're going to try to strike the head of a screw on a lens do it gently & carefully and bear in mind that cast alloys crack easily.
You may want to see whether the focus threads can be accessed from the front. A little tip for removing the front bezel - usually the first step - is to use double-sided sticky tape. A small piece either side, then your thumbs can get enough grip to unscrew it.
I doubt anyone reading this needs to be told but... don't use the soldering iron trick on a plastic lens...
Happy holidays! _________________ untitled |
|
| Nach oben |
|
 |
|
|