MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Pentax K and Ricoh -- how different are the mounts?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

If a lens is made for Ricoh K-mount cameras, can I assume that I can use a Pentax K to EOS adapter for such a lens, and mount it to my EOS DSLR?


Reply

I would say so as I use Pentax k mounts and Ricoh K mounts interchangeably on my Ricohs,no problems.I use the Pentax made K-M42 adapter on my Ricoh Cameras


Reply

Yes. The only difference between Pentax and Ricoh is the infamous pin on Ricoh-P lenses. Otherwise, it is a standard K mount.

The pin causes only problems when mounting the lens on a Pentax AF body because it sometimes get stuck in the AF contact.


Reply

Thanks, guys. This will help me in a possible purchase. Not that I need it, just that I want it. Cool


Reply

Jieffe hat folgendes geschrieben::
Yes. The only difference between Pentax and Ricoh is the infamous pin on Ricoh-P lenses. Otherwise, it is a standard K mount.

The pin causes only problems when mounting the lens on a Pentax AF body because it sometimes get stuck in the AF contact.


There is no pin in earlier Ricoh lenses, for example XR-lenses from around 1980. The mount is exactly the same. The problem comes in auto-rikenons? Somebody with more detailed info can verify this...


Reply

soikka hat folgendes geschrieben::
There is no pin in earlier Ricoh lenses, for example XR-lenses from around 1980. The mount is exactly the same. The problem comes in auto-rikenons? Somebody with more detailed info can verify this...

Early Ricoh have exactly the same mount as Pentax.

They used a different system to allow the use of the program mode on later models. Pentax added a bunch of contacts to inform the body about min and max apertures. Ricoh used just a pin for that purpose at a different location.

Third-party lens makers as Sigma produced lenses with both sets of contacts. I owned a Sigma 35-70 that worked in program mode on both my Ricoh XR-X and Pentax P30/MZ5n.


Reply

I have read it is the Ricoh lens marked with the P on the front.From the program cameras.

XR Rikenon 1:2.2 55 mount

Rikenon P zoom 1:3.4-4.5 35-70mm macro


I don't see a pin?? or is that it on the right?


Zuletzt bearbeitet von mo am Fr Nov 20, 2009 9:46 am, insgesamt 2 Male bearbeitet


Reply

In this specific case, the lens is an aftermarket, and probably dates to the mid-to-late 1980s. There's a button next to the smallest aperture number, which I'm sure is used to engage and disengage the program mode.


Reply

Mo-Fo hat folgendes geschrieben::
I don't see a pin?? or is that it on the right?

Yes, that's the specific Ricoh pin.


Reply

i am bumping up this thread.

So ... this Ricoh pin will interfere on an AF body? That means all the Pentax and Samsung DSLR bodies?


Reply

I don't have an answer for you, hk300, but since I started the thread regarding a Kalimar zoom I bought, and since I have it in my possession now, I thought I'd go ahead and post a pic of its lens mount. Please ignore the dust. My camera's flash amplifies dust that's all but invisible when you're just looking at the item.

This Kalimar's mount was drilled for a total of six pins/contacts. Only three of them are occupied. Two are occupied by pins, and one just appears to be either a simple contact, or perhaps just a plug. I have drawn arrows pointing to the two pins. The green arrow points to a pin that protrudes slightly when the aperture ring is set to the (A)P position -- Program for Pentax cameras, no doubt. The red arrow points to the Ricoh pin, which does not move at all, no matter what I twist, rotate or whatever. The Ricoh pin sits just a tiny amount above the mount flange. When the Pentax (A)P pin is engaged, it protrudes about 0.5mm above the flange, whereas the Ricoh pin protrudes maybe half that amount. Both pins are well-rounded and spring-loaded as well. I don't see how either one would prevent a lens from being dismounted if either coincided with a hole on a camera's mounting flange. The rounded nature of the pins, and the fact that they are spring-loaded should allow for them to be depressed easily back into the lens flange as the lens is rotated for removal.

Of course, I'm assuming that both these pins are behaving the way they were designed to behave.



Reply

cooltouch hat folgendes geschrieben::
I don't see how either one would prevent a lens from being dismounted if either coincided with a hole on a camera's mounting flange. The rounded nature of the pins, and the fact that they are spring-loaded should allow for them to be depressed easily back into the lens flange as the lens is rotated for removal.

Genuine Ricoh lenses as well as the Tamron Adaptall-2 for Ricoh uses a pin with a flat end that protrudes slightly longer than the one on most third-party lenses (they have a rounded pin similar to the Pentax contacts).

The rounded one is OK. I have a Sigma with both Pentax and Ricoh pins, all rounded, and the lens dismount without problems.