MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

what to use to keep the 'grip rubber' firm on the focus ring
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi,

What would/should one use to keep the 'grip rubber' material on the focus ring? I got another new 'old' lens and the grip material ring is loose:-).

My current plan is to use the typical glue for arts and craft. Pointers and suggestions are appreciated.

Cheers,


Reply

A little bit of contact cement will work. Don't overdo it though -- a little bit of that stuff goes a long way.

Contact cement is nice because it remains pliable. I use it for re-attaching camera body leatherettes after removing them for repairs.


Reply

cooltouch hat folgendes geschrieben::
A little bit of contact cement will work. Don't overdo it though -- a little bit of that stuff goes a long way.

Contact cement is nice because it remains pliable. I use it for re-attaching camera body leatherettes after removing them for repairs.


thanks


Reply

You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses.


Reply

Welcome Keith!


Reply

zx9 hat folgendes geschrieben::
You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses.
'

Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.

Cheers,


Reply

I use double sided carpet tape.. some doubles sided tapes don't adhere as the pasticisers in the rubber / leatherette cause a sticky goo to form..

I have a Nikon 950 where the factory glue likewise 'melted' and oozed over everything!

Carpet tape means that you can remove the cover later - many contact adhesives (like Evostik etc.) are permanent.. Pliobond from a good hardware store works well..

Doug.

cheve hat folgendes geschrieben::
zx9 hat folgendes geschrieben::
You could try hair spray, I have used it to re fix the grip on an EOS (if I am allowed to say that word here) 17-35mm . Spray a little into the cap (spray can's cap not lens cap) and lightly coat the inside of the lens grip, the grip is not instant so allows a little time for adjustments to be made, hold for a few minutes until it has set. It is not a permanent bond and can be carefully peeled off should you need to dismantle the lens. We used to use hair spray to fix handle bar grips on bikes, I have used it on the plastic barrel of my lens but do a discrete test to make sure you will not cause any permanent damage to your lenses.
'

Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.

Cheers,


Reply

nemesis101 hat folgendes geschrieben::
Zitat:
Carpet tape means that you can remove the cover later - many contact adhesives (like Evostik etc.) are permanent.. Pliobond from a good hardware store works well..
'

Keith, thank you for your suggestion. It is a very interesting solution. However, I would give the contact cement a try first. Believe or not, my family do not use hair spray at all, so it will be somewhat funny/waste to get a full can just to fix one lens:-). On the other hand, I have a few items that are loose around the house where I can use contact cement for - so I can kill a number of birds with just one tube of the stuff.


Just to clarify my earlier comment regarding the use of contact cement, the type I use is made by either Elmers or DAP, and comes in a small bottle with an applicator in the cap. It is very similar to Pliobond in that it remains pliable. In fact, I've owned both, and I can't honestly tell the difference between the two.


Reply

@Doug: thanks for the new option.

@Michael: thanks for your followup comments. I assume the 'DAP' are brand stocked by 'Home Depot'.

Cheers


Reply

cheve hat folgendes geschrieben::
@Michael: thanks for your followup comments. I assume the 'DAP' are brand stocked by 'Home Depot'.


Yes, as a matter of fact, I just bought a bottle of DAP contact cement from my local Home Depot just a couple weeks ago.