MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Removable glue
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Can you recommend a removable glue, that is easy to remove if not anymore needed?
I was thinking of something like the strange stuff that you have sometimes with computer magazines, where they attach a cd or dvd to the magazine with this type of glue that you can remove without striping off the paper.
I need to glue an eyepiece to a camera, but I don't want to make a mess - I just need something that keeps it in place, there is no need to resist pressure and such, and can be removed without damage.


Reply

Double-sided tape? There's one type used to tape carpets on floors which sticks pretty hard, but can be removed if necessary.

BTW lo trovi al Brico Center o in qualche colorificio ben fornito


Reply

ludoo hat folgendes geschrieben::
Double-sided tape? There's one type used to tape carpets on floors which sticks pretty hard, but can be removed if necessary.

BTW lo trovi al Brico Center o in qualche colorificio ben fornito


+1 available pretty strong one I use to fix my bird plate.


Reply

ludoo hat folgendes geschrieben::
Double-sided tape? There's one type used to tape carpets on floors which sticks pretty hard, but can be removed if necessary.

BTW lo trovi al Brico Center o in qualche colorificio ben fornito


Thanks, but I need to fix an eyepiece which is quite narrow in the area in contact with the camera. I would have problems using a tape.


Reply

"Arabic gum" could do it. It's the stuff we other printers put on our printing plates to stock them ( ok, I know that in time of CTP it's obsolete). It sticks very well and you can dissolve it with water. It's the stuff on the back of stamps, just ask a printer to give you a little.
Andreas


Reply

You can also use contact cement -- the kind that comes in a small bottle with applicator in the cap. Here in the US, you see it in the Elmer's and DAP brands.

Contact cement never hardens. It adheres very well, but remains pliable, and also dries quickly. I would think a thin coating on the areas in question would be sufficient.

If either or both of the items are plastic, however, you might want to test it in a small inconsipicous area. It smells strongly of toluene and/or acetone before it cures, either of which will soften or disolve certain plastics.

Another item that doesn't harm plastic is silicone seal -- found in tubes. This will hold the items together provided it has enough surface area to grip, and can be removed later.


Reply

Orio hat folgendes geschrieben::
Can you recommend a removable glue, that is easy to remove if not anymore needed?
I was thinking of something like the strange stuff that you have sometimes with computer magazines, where they attach a cd or dvd to the magazine with this type of glue that you can remove without striping off the paper.
I need to glue an eyepiece to a camera, but I don't want to make a mess - I just need something that keeps it in place, there is no need to resist pressure and such, and can be removed without damage.

http://forum.mflenses.com/just-won-a-contax-137ma-with-zeiss-planar-lens-t8814,start,30.html#82740 might be the thing.


Reply

Perhaps a Glue Gun with hot melt adhesive, you can remove it very easy.
I use it for all my computer and server parts since years.


Reply

What you are referring to is simply rubber cement - any stationary store should have it - thats what is used on CDs and credit cards when mailed or put in magazines


Reply

cooltouch hat folgendes geschrieben::
You can...use contact cement
But as Michael mentions, most of these are based on harsh solvents which will most certainly destroy many plastics. Water-based variants are available, but these are significantly more expensive than their solvent-based counterparts. A contact cement such as is found in art & craft stores may be water-based, but I wouldn't expect to find the same in a hardware or home-improvement shop.

cooltouch hat folgendes geschrieben::
Another item that doesn't harm plastic is silicone seal -- found in tubes.
100% untrue, in my experience. Unless Michael is describing some sort of hobby or craft silicone claiming to be safe for most materials, I've never known one to exist which doesn't contain harsh solvents and bonding agents. I've even used some which will cloud nearby glass & clear plastics as it cures because of the solvent gases they emit, and they bond extremely well to nearly any dry material they cure on.


I have used many of these products a number of years, as a professional with plastic laminates such as Formica, and installation of kitchen & bathroom cabinets and countertops.


Reply

SkedAddled hat folgendes geschrieben::
cooltouch hat folgendes geschrieben::
Another item that doesn't harm plastic is silicone seal -- found in tubes.
100% untrue, in my experience. Unless Michael is describing some sort of hobby or craft silicone claiming to be safe for most materials, I've never known one to exist which doesn't contain harsh solvents and bonding agents. I've even used some which will cloud nearby glass & clear plastics as it cures because of the solvent gases they emit, and they bond extremely well to nearly any dry material they cure on.


I have used many of these products a number of years, as a professional with plastic laminates such as Formica, and installation of kitchen & bathroom cabinets and countertops.


Honestly, I've never used any of the sorts of silicone products you're describing. Most of the automotive types I've used are specially designed not to harm the sensitive elements inside oxygen sensors, and are resistant to most solvents. I've used these in all sorts of automotive applications, including plastics, and have never witnessed any sort of reaction. They do emit a smell reminiscent of vinegar when curing, though. Nonetheless, I would use caution with these just to be safe. However, I would think that the household types that are used for caulking around sinks or tubs or windows would be safe enough. But best to use with caution, I suppose.


Reply

Carlsson hat folgendes geschrieben::
Perhaps a Glue Gun with hot melt adhesive, you can remove it very easy.
I use it for all my computer and server parts since years.

+1 Smile


Reply

cooltouch hat folgendes geschrieben::
SkedAddled hat folgendes geschrieben::
cooltouch hat folgendes geschrieben::
Another item that doesn't harm plastic is silicone seal -- found in tubes.
100% untrue, in my experience. Unless Michael is describing some sort of hobby or craft silicone claiming to be safe for most materials, I've never known one to exist which doesn't contain harsh solvents and bonding agents. I've even used some which will cloud nearby glass & clear plastics as it cures because of the solvent gases they emit, and they bond extremely well to nearly any dry material they cure on.


I have used many of these products a number of years, as a professional with plastic laminates such as Formica, and installation of kitchen & bathroom cabinets and countertops.


Honestly, I've never used any of the sorts of silicone products you're describing. Most of the automotive types I've used...


Aha! I was not even considering the automotive types, as it's been at least 15 years since I've used any. Makes sense to me now, as several are indeed specially formulated for sealing liquid cooling systems.
However, the types used for various home improvement and kitchen & bath applications are certainly NOT recommended for plastics of the types used in modern cameras.

Latex, or water-based adhesives, are a completely different story, however.


Reply

Somewhat of a pain to clean off, 100%, unless it comes off in large pieces or all at once...

Regardless, sticks to paint and won't melt plastic...I'm looking at my 1/2 empty tube right now Cool



Reply

I agree with "ryan s"-
I have used this and other silicon adhesive paste(I think you can get them in a few different colors mainly white, clear, wood, and black).It works good if you clean the sides your are gluing with alcohol on a cloth or swab, then apply the paste and squish it down gently making sure you push any bubbles out that way. While the paste is still fresh and holding the glued components down-clean the excesses or undesirables with alcohol. Once you are satisfied with the outcome you should weight it down or clamp it with something and let it set for at least a hour or so.

It holds the glued components very well together.

The great thing with this you can take it apart without breaking anything if you dont want it anymore -if you gently insert something in the joined crack ,and gently pry it at different spots. The mess it leaves behind is cleanable with achohol- you may have to peel the bigger clumps like "ryan s" mentions with your nails first, and a cloth soaked in alcohol should clean up the rest very well, leaving no trace scratches etc..the key is to be gentle.

Marine hardware stores always carry them.