MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

P6 back leatherette: which glue?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

When the back covering of my Pentacon six TL came off, I cleaned off the residual glue and put it back using a generic contact adhesive I got from my local news agent, which worked well on other cameras, but after a couple of months, it came off again, all four edges were lifting away.

The tricky thing about the P6 back is that it is not flat, but has a large raised portion in the middle in a "H' shape, both for giving interior space for the pressure plate, and adding stiffness to the back itself. In other words the leatherette has to stretch at certain places to conform to the double-curved contour, which might explain the glue not being able to hold it down at the edges. On other cameras where the leatherette pieces are lying flat, or just with a single curve, then there's no problem whatsoever. The leatherette, however, has been stretched in the right shape a bit so I am not starting from scratch.

So it seems I need a contact adhesive which has a stronger grip than most for this particular camera; I would like to hear from those who have been successful in doing that. I think I can get a tin of Henkel's Pattex, which is probably quite universal for the purpose, but is it strong enough?


Reply

I've had good luck with either Elmer's brand or DAP brand contact adhesive for reattaching leatherettes, generally available at US hardware stores. I've even used it as the adhesive for attaching a new motorcycle seat vinyl to the metal seat pan, and it worked great for that.

However, the old-school preference is an adhesive called Pliobond. I took a camera repair class years ago, and the guy who taught it, who was a camera repair tech from way back, said that Pliobond was the correct adhesive for reattaching leatherettes. I can find it at a well-stocked hardware store over here. Hopefully you will have similar luck Down Under.


Reply

PVA wood glue.

Cheap, easy to find and easy to work with.

Make sure the camera back and the leatherette panel are both nice and clean with no bumps etc. then apply a thin layer of PVA to the camera back only and reapply the leatherette.

Push it down firmly all over to make sure it's completely flat, paying special attention to the edges - it's best if the adhesive exudes here as it means the edges are more likely to be properly stuck down.

Make sure the leatherette is positioned correctly and wipe off any excess glue with a damp cloth.

You can also fine tune the leatherette positioning for about a minute or so before the adhesive starts to get tacky.

That's it.


Reply

Gentlemen,

Thank you for offering your thoughts, much appreciated!

Michael:

I am aware of Pliobond; there seems to be some confusion as instanced by these two threads on another forum:

http://www.kyphoto.com/classics/forum/messages/3/16479.html?1256680017

http://www.kyphoto.com/classics/forum/messages/3/7447.html?1257639073

Since the leatherette covering is just stuck to the back and does not need removal for subsequent servicing, something that can hold it down properly would be good, without having to worry about removing it. I will also try to see if the other suggestions in the second thread can be sourced locally.

Bob,

Another of my pursuits is bookbinding so I use PVA a lot; in fact I use PVA especially make for bookbinding which is pH neutral. However, PVA is water-based and reversible, I do not know how well it holds on a satin chrome surface, especially when it needs to hold extremely well at all four edges. The leatherette is a plastic membrane coated on fabrics so it would not allow moisture - no matter how little - to escape from underneath.

Thank you again!


Reply

Seele,

I've used PVA myself to restick leatherette to satin chrome and never had any edge lift afterwards. Used it to reattach the leatherette to a couple of P6 and Exakta prisms over a year ago and everything's still stuck down nicely.

Why not try it anyway - if it works, great, but if not, just go for the Pliobond.


Reply

I recently purchased some Pliobond from Micro-tools (they have some coold camera repair supplies, too) to work on some Hasselblad leatherettes. I haven't received it yet, but I'll get back to you once I do Smile


Reply

My repair man gave me some double sided tape as the leatherette lifted from the edge near the hinge,it worked very well.